Branch data Line data Source code
1 : : /*
2 : : * linux/kernel/hrtimer.c
3 : : *
4 : : * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
5 : : * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
6 : : * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
7 : : *
8 : : * High-resolution kernel timers
9 : : *
10 : : * In contrast to the low-resolution timeout API implemented in
11 : : * kernel/timer.c, hrtimers provide finer resolution and accuracy
12 : : * depending on system configuration and capabilities.
13 : : *
14 : : * These timers are currently used for:
15 : : * - itimers
16 : : * - POSIX timers
17 : : * - nanosleep
18 : : * - precise in-kernel timing
19 : : *
20 : : * Started by: Thomas Gleixner and Ingo Molnar
21 : : *
22 : : * Credits:
23 : : * based on kernel/timer.c
24 : : *
25 : : * Help, testing, suggestions, bugfixes, improvements were
26 : : * provided by:
27 : : *
28 : : * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
29 : : * et. al.
30 : : *
31 : : * For licencing details see kernel-base/COPYING
32 : : */
33 : :
34 : : #include <linux/cpu.h>
35 : : #include <linux/export.h>
36 : : #include <linux/percpu.h>
37 : : #include <linux/hrtimer.h>
38 : : #include <linux/notifier.h>
39 : : #include <linux/syscalls.h>
40 : : #include <linux/kallsyms.h>
41 : : #include <linux/interrupt.h>
42 : : #include <linux/tick.h>
43 : : #include <linux/seq_file.h>
44 : : #include <linux/err.h>
45 : : #include <linux/debugobjects.h>
46 : : #include <linux/sched.h>
47 : : #include <linux/sched/sysctl.h>
48 : : #include <linux/sched/rt.h>
49 : : #include <linux/timer.h>
50 : : #include <linux/freezer.h>
51 : :
52 : : #include <asm/uaccess.h>
53 : :
54 : : #include <trace/events/timer.h>
55 : :
56 : : /*
57 : : * The timer bases:
58 : : *
59 : : * There are more clockids then hrtimer bases. Thus, we index
60 : : * into the timer bases by the hrtimer_base_type enum. When trying
61 : : * to reach a base using a clockid, hrtimer_clockid_to_base()
62 : : * is used to convert from clockid to the proper hrtimer_base_type.
63 : : */
64 : : DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
65 : : {
66 : :
67 : : .lock = __RAW_SPIN_LOCK_UNLOCKED(hrtimer_bases.lock),
68 : : .clock_base =
69 : : {
70 : : {
71 : : .index = HRTIMER_BASE_MONOTONIC,
72 : : .clockid = CLOCK_MONOTONIC,
73 : : .get_time = &ktime_get,
74 : : .resolution = KTIME_LOW_RES,
75 : : },
76 : : {
77 : : .index = HRTIMER_BASE_REALTIME,
78 : : .clockid = CLOCK_REALTIME,
79 : : .get_time = &ktime_get_real,
80 : : .resolution = KTIME_LOW_RES,
81 : : },
82 : : {
83 : : .index = HRTIMER_BASE_BOOTTIME,
84 : : .clockid = CLOCK_BOOTTIME,
85 : : .get_time = &ktime_get_boottime,
86 : : .resolution = KTIME_LOW_RES,
87 : : },
88 : : {
89 : : .index = HRTIMER_BASE_TAI,
90 : : .clockid = CLOCK_TAI,
91 : : .get_time = &ktime_get_clocktai,
92 : : .resolution = KTIME_LOW_RES,
93 : : },
94 : : }
95 : : };
96 : :
97 : : static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
98 : : [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
99 : : [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
100 : : [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
101 : : [CLOCK_TAI] = HRTIMER_BASE_TAI,
102 : : };
103 : :
104 : : static inline int hrtimer_clockid_to_base(clockid_t clock_id)
105 : : {
106 : 123 : return hrtimer_clock_to_base_table[clock_id];
107 : : }
108 : :
109 : :
110 : : /*
111 : : * Get the coarse grained time at the softirq based on xtime and
112 : : * wall_to_monotonic.
113 : : */
114 : 0 : static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
115 : : {
116 : : ktime_t xtim, mono, boot;
117 : : struct timespec xts, tom, slp;
118 : : s32 tai_offset;
119 : :
120 : 0 : get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
121 : 0 : tai_offset = timekeeping_get_tai_offset();
122 : :
123 : : xtim = timespec_to_ktime(xts);
124 : 0 : mono = ktime_add(xtim, timespec_to_ktime(tom));
125 : 0 : boot = ktime_add(mono, timespec_to_ktime(slp));
126 : 0 : base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
127 : 0 : base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
128 : 0 : base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
129 : 0 : base->clock_base[HRTIMER_BASE_TAI].softirq_time =
130 : 0 : ktime_add(xtim, ktime_set(tai_offset, 0));
131 : 0 : }
132 : :
133 : : /*
134 : : * Functions and macros which are different for UP/SMP systems are kept in a
135 : : * single place
136 : : */
137 : : #ifdef CONFIG_SMP
138 : :
139 : : /*
140 : : * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
141 : : * means that all timers which are tied to this base via timer->base are
142 : : * locked, and the base itself is locked too.
143 : : *
144 : : * So __run_timers/migrate_timers can safely modify all timers which could
145 : : * be found on the lists/queues.
146 : : *
147 : : * When the timer's base is locked, and the timer removed from list, it is
148 : : * possible to set timer->base = NULL and drop the lock: the timer remains
149 : : * locked.
150 : : */
151 : : static
152 : 14218775 : struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
153 : : unsigned long *flags)
154 : : {
155 : : struct hrtimer_clock_base *base;
156 : :
157 : : for (;;) {
158 : 14218775 : base = timer->base;
159 [ + ]: 14218775 : if (likely(base != NULL)) {
160 : 14219970 : raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
161 [ + - ]: 14284460 : if (likely(base == timer->base))
162 : 14284460 : return base;
163 : : /* The timer has migrated to another CPU: */
164 : 0 : raw_spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
165 : : }
166 : 0 : cpu_relax();
167 : : }
168 : : }
169 : :
170 : :
171 : : /*
172 : : * Get the preferred target CPU for NOHZ
173 : : */
174 : 0 : static int hrtimer_get_target(int this_cpu, int pinned)
175 : : {
176 : : #ifdef CONFIG_NO_HZ_COMMON
177 [ + + ][ + ]: 8628000 : if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
[ - + ]
178 : 0 : return get_nohz_timer_target();
179 : : #endif
180 : 8628033 : return this_cpu;
181 : : }
182 : :
183 : : /*
184 : : * With HIGHRES=y we do not migrate the timer when it is expiring
185 : : * before the next event on the target cpu because we cannot reprogram
186 : : * the target cpu hardware and we would cause it to fire late.
187 : : *
188 : : * Called with cpu_base->lock of target cpu held.
189 : : */
190 : : static int
191 : 0 : hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
192 : : {
193 : : #ifdef CONFIG_HIGH_RES_TIMERS
194 : : ktime_t expires;
195 : :
196 [ # # ]: 0 : if (!new_base->cpu_base->hres_active)
197 : : return 0;
198 : :
199 : 0 : expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
200 : 0 : return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
201 : : #else
202 : : return 0;
203 : : #endif
204 : : }
205 : :
206 : : /*
207 : : * Switch the timer base to the current CPU when possible.
208 : : */
209 : : static inline struct hrtimer_clock_base *
210 : 792 : switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
211 : : int pinned)
212 : : {
213 : 0 : struct hrtimer_clock_base *new_base;
214 : : struct hrtimer_cpu_base *new_cpu_base;
215 : 8632817 : int this_cpu = smp_processor_id();
216 : 8632817 : int cpu = hrtimer_get_target(this_cpu, pinned);
217 : 8532949 : int basenum = base->index;
218 : :
219 : : again:
220 : 8532949 : new_cpu_base = &per_cpu(hrtimer_bases, cpu);
221 : 8532949 : new_base = &new_cpu_base->clock_base[basenum];
222 : :
223 [ + + ]: 8532949 : if (base != new_base) {
224 : : /*
225 : : * We are trying to move timer to new_base.
226 : : * However we can't change timer's base while it is running,
227 : : * so we keep it on the same CPU. No hassle vs. reprogramming
228 : : * the event source in the high resolution case. The softirq
229 : : * code will take care of this when the timer function has
230 : : * completed. There is no conflict as we hold the lock until
231 : : * the timer is enqueued.
232 : : */
233 [ + - ]: 792 : if (unlikely(hrtimer_callback_running(timer)))
234 : : return base;
235 : :
236 : : /* See the comment in lock_timer_base() */
237 : 792 : timer->base = NULL;
238 : 792 : raw_spin_unlock(&base->cpu_base->lock);
239 : 792 : raw_spin_lock(&new_base->cpu_base->lock);
240 : :
241 [ - + ][ # # ]: 792 : if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
242 : : cpu = this_cpu;
243 : : raw_spin_unlock(&new_base->cpu_base->lock);
244 : 0 : raw_spin_lock(&base->cpu_base->lock);
245 : 0 : timer->base = base;
246 : : goto again;
247 : : }
248 : 792 : timer->base = new_base;
249 : : }
250 : : return new_base;
251 : : }
252 : :
253 : : #else /* CONFIG_SMP */
254 : :
255 : : static inline struct hrtimer_clock_base *
256 : : lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
257 : : {
258 : : struct hrtimer_clock_base *base = timer->base;
259 : :
260 : : raw_spin_lock_irqsave(&base->cpu_base->lock, *flags);
261 : :
262 : : return base;
263 : : }
264 : :
265 : : # define switch_hrtimer_base(t, b, p) (b)
266 : :
267 : : #endif /* !CONFIG_SMP */
268 : :
269 : : /*
270 : : * Functions for the union type storage format of ktime_t which are
271 : : * too large for inlining:
272 : : */
273 : : #if BITS_PER_LONG < 64
274 : : # ifndef CONFIG_KTIME_SCALAR
275 : : /**
276 : : * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
277 : : * @kt: addend
278 : : * @nsec: the scalar nsec value to add
279 : : *
280 : : * Returns the sum of kt and nsec in ktime_t format
281 : : */
282 : : ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
283 : : {
284 : : ktime_t tmp;
285 : :
286 : : if (likely(nsec < NSEC_PER_SEC)) {
287 : : tmp.tv64 = nsec;
288 : : } else {
289 : : unsigned long rem = do_div(nsec, NSEC_PER_SEC);
290 : :
291 : : /* Make sure nsec fits into long */
292 : : if (unlikely(nsec > KTIME_SEC_MAX))
293 : : return (ktime_t){ .tv64 = KTIME_MAX };
294 : :
295 : : tmp = ktime_set((long)nsec, rem);
296 : : }
297 : :
298 : : return ktime_add(kt, tmp);
299 : : }
300 : :
301 : : EXPORT_SYMBOL_GPL(ktime_add_ns);
302 : :
303 : : /**
304 : : * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
305 : : * @kt: minuend
306 : : * @nsec: the scalar nsec value to subtract
307 : : *
308 : : * Returns the subtraction of @nsec from @kt in ktime_t format
309 : : */
310 : : ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
311 : : {
312 : : ktime_t tmp;
313 : :
314 : : if (likely(nsec < NSEC_PER_SEC)) {
315 : : tmp.tv64 = nsec;
316 : : } else {
317 : : unsigned long rem = do_div(nsec, NSEC_PER_SEC);
318 : :
319 : : tmp = ktime_set((long)nsec, rem);
320 : : }
321 : :
322 : : return ktime_sub(kt, tmp);
323 : : }
324 : :
325 : : EXPORT_SYMBOL_GPL(ktime_sub_ns);
326 : : # endif /* !CONFIG_KTIME_SCALAR */
327 : :
328 : : /*
329 : : * Divide a ktime value by a nanosecond value
330 : : */
331 : 0 : u64 ktime_divns(const ktime_t kt, s64 div)
332 : : {
333 : : u64 dclc;
334 : : int sft = 0;
335 : :
336 : 2666483 : dclc = ktime_to_ns(kt);
337 : : /* Make sure the divisor is less than 2^32: */
338 [ - + ]: 2666483 : while (div >> 32) {
339 : 0 : sft++;
340 : 0 : div >>= 1;
341 : : }
342 : 2666483 : dclc >>= sft;
343 [ - + ][ # # ]: 2666483 : do_div(dclc, (unsigned long) div);
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ][ # # ]
[ # # ]
344 : :
345 : 2666483 : return dclc;
346 : : }
347 : : #endif /* BITS_PER_LONG >= 64 */
348 : :
349 : : /*
350 : : * Add two ktime values and do a safety check for overflow:
351 : : */
352 : 0 : ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
353 : : {
354 : 19484434 : ktime_t res = ktime_add(lhs, rhs);
355 : :
356 : : /*
357 : : * We use KTIME_SEC_MAX here, the maximum timeout which we can
358 : : * return to user space in a timespec:
359 : : */
360 [ + ][ + ]: 19484434 : if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64)
[ + + ][ + + ]
[ + ][ + + ]
361 : : res = ktime_set(KTIME_SEC_MAX, 0);
362 : :
363 : 0 : return res;
364 : : }
365 : :
366 : : EXPORT_SYMBOL_GPL(ktime_add_safe);
367 : :
368 : : #ifdef CONFIG_DEBUG_OBJECTS_TIMERS
369 : :
370 : : static struct debug_obj_descr hrtimer_debug_descr;
371 : :
372 : : static void *hrtimer_debug_hint(void *addr)
373 : : {
374 : : return ((struct hrtimer *) addr)->function;
375 : : }
376 : :
377 : : /*
378 : : * fixup_init is called when:
379 : : * - an active object is initialized
380 : : */
381 : : static int hrtimer_fixup_init(void *addr, enum debug_obj_state state)
382 : : {
383 : : struct hrtimer *timer = addr;
384 : :
385 : : switch (state) {
386 : : case ODEBUG_STATE_ACTIVE:
387 : : hrtimer_cancel(timer);
388 : : debug_object_init(timer, &hrtimer_debug_descr);
389 : : return 1;
390 : : default:
391 : : return 0;
392 : : }
393 : : }
394 : :
395 : : /*
396 : : * fixup_activate is called when:
397 : : * - an active object is activated
398 : : * - an unknown object is activated (might be a statically initialized object)
399 : : */
400 : : static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
401 : : {
402 : : switch (state) {
403 : :
404 : : case ODEBUG_STATE_NOTAVAILABLE:
405 : : WARN_ON_ONCE(1);
406 : : return 0;
407 : :
408 : : case ODEBUG_STATE_ACTIVE:
409 : : WARN_ON(1);
410 : :
411 : : default:
412 : : return 0;
413 : : }
414 : : }
415 : :
416 : : /*
417 : : * fixup_free is called when:
418 : : * - an active object is freed
419 : : */
420 : : static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
421 : : {
422 : : struct hrtimer *timer = addr;
423 : :
424 : : switch (state) {
425 : : case ODEBUG_STATE_ACTIVE:
426 : : hrtimer_cancel(timer);
427 : : debug_object_free(timer, &hrtimer_debug_descr);
428 : : return 1;
429 : : default:
430 : : return 0;
431 : : }
432 : : }
433 : :
434 : : static struct debug_obj_descr hrtimer_debug_descr = {
435 : : .name = "hrtimer",
436 : : .debug_hint = hrtimer_debug_hint,
437 : : .fixup_init = hrtimer_fixup_init,
438 : : .fixup_activate = hrtimer_fixup_activate,
439 : : .fixup_free = hrtimer_fixup_free,
440 : : };
441 : :
442 : : static inline void debug_hrtimer_init(struct hrtimer *timer)
443 : : {
444 : : debug_object_init(timer, &hrtimer_debug_descr);
445 : : }
446 : :
447 : : static inline void debug_hrtimer_activate(struct hrtimer *timer)
448 : : {
449 : : debug_object_activate(timer, &hrtimer_debug_descr);
450 : : }
451 : :
452 : : static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
453 : : {
454 : : debug_object_deactivate(timer, &hrtimer_debug_descr);
455 : : }
456 : :
457 : : static inline void debug_hrtimer_free(struct hrtimer *timer)
458 : : {
459 : : debug_object_free(timer, &hrtimer_debug_descr);
460 : : }
461 : :
462 : : static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
463 : : enum hrtimer_mode mode);
464 : :
465 : : void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
466 : : enum hrtimer_mode mode)
467 : : {
468 : : debug_object_init_on_stack(timer, &hrtimer_debug_descr);
469 : : __hrtimer_init(timer, clock_id, mode);
470 : : }
471 : : EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
472 : :
473 : : void destroy_hrtimer_on_stack(struct hrtimer *timer)
474 : : {
475 : : debug_object_free(timer, &hrtimer_debug_descr);
476 : : }
477 : :
478 : : #else
479 : : static inline void debug_hrtimer_init(struct hrtimer *timer) { }
480 : : static inline void debug_hrtimer_activate(struct hrtimer *timer) { }
481 : : static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
482 : : #endif
483 : :
484 : : static inline void
485 : : debug_init(struct hrtimer *timer, clockid_t clockid,
486 : : enum hrtimer_mode mode)
487 : : {
488 : : debug_hrtimer_init(timer);
489 : : trace_hrtimer_init(timer, clockid, mode);
490 : : }
491 : :
492 : : static inline void debug_activate(struct hrtimer *timer)
493 : : {
494 : : debug_hrtimer_activate(timer);
495 : : trace_hrtimer_start(timer);
496 : : }
497 : :
498 : : static inline void debug_deactivate(struct hrtimer *timer)
499 : : {
500 : : debug_hrtimer_deactivate(timer);
501 : : trace_hrtimer_cancel(timer);
502 : : }
503 : :
504 : : /* High resolution timer related functions */
505 : : #ifdef CONFIG_HIGH_RES_TIMERS
506 : :
507 : : /*
508 : : * High resolution timer enabled ?
509 : : */
510 : : static int hrtimer_hres_enabled __read_mostly = 1;
511 : :
512 : : /*
513 : : * Enable / Disable high resolution mode
514 : : */
515 : 0 : static int __init setup_hrtimer_hres(char *str)
516 : : {
517 [ # # ]: 0 : if (!strcmp(str, "off"))
518 : 0 : hrtimer_hres_enabled = 0;
519 [ # # ]: 0 : else if (!strcmp(str, "on"))
520 : 0 : hrtimer_hres_enabled = 1;
521 : : else
522 : : return 0;
523 : : return 1;
524 : : }
525 : :
526 : : __setup("highres=", setup_hrtimer_hres);
527 : :
528 : : /*
529 : : * hrtimer_high_res_enabled - query, if the highres mode is enabled
530 : : */
531 : : static inline int hrtimer_is_hres_enabled(void)
532 : : {
533 : 0 : return hrtimer_hres_enabled;
534 : : }
535 : :
536 : : /*
537 : : * Is the high resolution mode active ?
538 : : */
539 : : static inline int hrtimer_hres_active(void)
540 : : {
541 : 41143634 : return __this_cpu_read(hrtimer_bases.hres_active);
542 : : }
543 : :
544 : : /*
545 : : * Reprogram the event source with checking both queues for the
546 : : * next event
547 : : * Called with interrupts disabled and base->lock held
548 : : */
549 : : static void
550 : 0 : hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
551 : : {
552 : : int i;
553 : 7345608 : struct hrtimer_clock_base *base = cpu_base->clock_base;
554 : : ktime_t expires, expires_next;
555 : :
556 : : expires_next.tv64 = KTIME_MAX;
557 : :
558 [ + + ]: 36598419 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
559 : : struct hrtimer *timer;
560 : : struct timerqueue_node *next;
561 : :
562 : 29252811 : next = timerqueue_getnext(&base->active);
563 [ + + ]: 29252811 : if (!next)
564 : 24306347 : continue;
565 : : timer = container_of(next, struct hrtimer, node);
566 : :
567 : 4946464 : expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
568 : : /*
569 : : * clock_was_set() has changed base->offset so the
570 : : * result might be negative. Fix it up to prevent a
571 : : * false positive in clockevents_program_event()
572 : : */
573 [ - + ]: 4946464 : if (expires.tv64 < 0)
574 : : expires.tv64 = 0;
575 [ + + ]: 4946464 : if (expires.tv64 < expires_next.tv64)
576 : : expires_next = expires;
577 : : }
578 : :
579 [ + ][ + ]: 7345608 : if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
580 : 6083 : return;
581 : :
582 : 7413038 : cpu_base->expires_next.tv64 = expires_next.tv64;
583 : :
584 [ + + ]: 7413038 : if (cpu_base->expires_next.tv64 != KTIME_MAX)
585 : 4508072 : tick_program_event(cpu_base->expires_next, 1);
586 : : }
587 : :
588 : : /*
589 : : * Shared reprogramming for clock_realtime and clock_monotonic
590 : : *
591 : : * When a timer is enqueued and expires earlier than the already enqueued
592 : : * timers, we have to check, whether it expires earlier than the timer for
593 : : * which the clock event device was armed.
594 : : *
595 : : * Called with interrupts disabled and base->cpu_base.lock held
596 : : */
597 : 0 : static int hrtimer_reprogram(struct hrtimer *timer,
598 : : struct hrtimer_clock_base *base)
599 : : {
600 : 16388342 : struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
601 : 8194171 : ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
602 : : int res;
603 : :
604 [ - + ][ # # ]: 8194171 : WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
[ - + ]
605 : :
606 : : /*
607 : : * When the callback is running, we do not reprogram the clock event
608 : : * device. The timer callback is either running on a different CPU or
609 : : * the callback is executed in the hrtimer_interrupt context. The
610 : : * reprogramming is handled either by the softirq, which called the
611 : : * callback or at the end of the hrtimer_interrupt.
612 : : */
613 [ + - ]: 8220737 : if (hrtimer_callback_running(timer))
614 : : return 0;
615 : :
616 : : /*
617 : : * CLOCK_REALTIME timer might be requested with an absolute
618 : : * expiry time which is less than base->offset. Nothing wrong
619 : : * about that, just avoid to call into the tick code, which
620 : : * has now objections against negative expiry values.
621 : : */
622 [ + + ]: 8220737 : if (expires.tv64 < 0)
623 : : return -ETIME;
624 : :
625 [ + + ]: 8201335 : if (expires.tv64 >= cpu_base->expires_next.tv64)
626 : : return 0;
627 : :
628 : : /*
629 : : * If a hang was detected in the last timer interrupt then we
630 : : * do not schedule a timer which is earlier than the expiry
631 : : * which we enforced in the hang detection. We want the system
632 : : * to make progress.
633 : : */
634 [ + + ]: 7694956 : if (cpu_base->hang_detected)
635 : : return 0;
636 : :
637 : : /*
638 : : * Clockevents returns -ETIME, when the event was in the past.
639 : : */
640 : 7687723 : res = tick_program_event(expires, 0);
641 [ + ]: 15915072 : if (!IS_ERR_VALUE(res))
642 : 7720901 : cpu_base->expires_next = expires;
643 : : return res;
644 : : }
645 : :
646 : : /*
647 : : * Initialize the high resolution related parts of cpu_base
648 : : */
649 : : static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
650 : : {
651 : 0 : base->expires_next.tv64 = KTIME_MAX;
652 : 0 : base->hres_active = 0;
653 : : }
654 : :
655 : : /*
656 : : * When High resolution timers are active, try to reprogram. Note, that in case
657 : : * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
658 : : * check happens. The timer gets enqueued into the rbtree. The reprogramming
659 : : * and expiry check is done in the hrtimer_interrupt or in the softirq.
660 : : */
661 : : static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
662 : : struct hrtimer_clock_base *base)
663 : : {
664 [ + + ][ + + ]: 8100951 : return base->cpu_base->hres_active && hrtimer_reprogram(timer, base);
665 : : }
666 : :
667 : : static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
668 : : {
669 : 3735542 : ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
670 : 3735542 : ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
671 : 3735542 : ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
672 : :
673 : 3735741 : return ktime_get_update_offsets(offs_real, offs_boot, offs_tai);
674 : : }
675 : :
676 : : /*
677 : : * Retrigger next event is called after clock was set
678 : : *
679 : : * Called with interrupts disabled via on_each_cpu()
680 : : */
681 : 0 : static void retrigger_next_event(void *arg)
682 : : {
683 : 106 : struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
684 : :
685 [ + - ]: 53 : if (!hrtimer_hres_active())
686 : 0 : return;
687 : :
688 : 53 : raw_spin_lock(&base->lock);
689 : : hrtimer_update_base(base);
690 : 54 : hrtimer_force_reprogram(base, 0);
691 : : raw_spin_unlock(&base->lock);
692 : : }
693 : :
694 : : /*
695 : : * Switch to high resolution mode
696 : : */
697 : 0 : static int hrtimer_switch_to_hres(void)
698 : : {
699 : 0 : int i, cpu = smp_processor_id();
700 : 0 : struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
701 : : unsigned long flags;
702 : :
703 [ # # ]: 0 : if (base->hres_active)
704 : : return 1;
705 : :
706 : : local_irq_save(flags);
707 : :
708 [ # # ]: 0 : if (tick_init_highres()) {
709 [ # # ]: 0 : local_irq_restore(flags);
710 : 0 : printk(KERN_WARNING "Could not switch to high resolution "
711 : : "mode on CPU %d\n", cpu);
712 : 0 : return 0;
713 : : }
714 : 0 : base->hres_active = 1;
715 [ # # ]: 0 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
716 : 0 : base->clock_base[i].resolution = KTIME_HIGH_RES;
717 : :
718 : 0 : tick_setup_sched_timer();
719 : : /* "Retrigger" the interrupt to get things going */
720 : 0 : retrigger_next_event(NULL);
721 [ # # ]: 0 : local_irq_restore(flags);
722 : : return 1;
723 : : }
724 : :
725 : 0 : static void clock_was_set_work(struct work_struct *work)
726 : : {
727 : 1 : clock_was_set();
728 : 1 : }
729 : :
730 : : static DECLARE_WORK(hrtimer_work, clock_was_set_work);
731 : :
732 : : /*
733 : : * Called from timekeeping and resume code to reprogramm the hrtimer
734 : : * interrupt device on all cpus.
735 : : */
736 : 0 : void clock_was_set_delayed(void)
737 : : {
738 : : schedule_work(&hrtimer_work);
739 : 1 : }
740 : :
741 : : #else
742 : :
743 : : static inline int hrtimer_hres_active(void) { return 0; }
744 : : static inline int hrtimer_is_hres_enabled(void) { return 0; }
745 : : static inline int hrtimer_switch_to_hres(void) { return 0; }
746 : : static inline void
747 : : hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
748 : : static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
749 : : struct hrtimer_clock_base *base)
750 : : {
751 : : return 0;
752 : : }
753 : : static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
754 : : static inline void retrigger_next_event(void *arg) { }
755 : :
756 : : #endif /* CONFIG_HIGH_RES_TIMERS */
757 : :
758 : : /*
759 : : * Clock realtime was set
760 : : *
761 : : * Change the offset of the realtime clock vs. the monotonic
762 : : * clock.
763 : : *
764 : : * We might have to reprogram the high resolution timer interrupt. On
765 : : * SMP we call the architecture specific code to retrigger _all_ high
766 : : * resolution timer interrupts. On UP we just disable interrupts and
767 : : * call the high resolution interrupt code.
768 : : */
769 : 0 : void clock_was_set(void)
770 : : {
771 : : #ifdef CONFIG_HIGH_RES_TIMERS
772 : : /* Retrigger the CPU local events everywhere */
773 : 11 : on_each_cpu(retrigger_next_event, NULL, 1);
774 : : #endif
775 : 11 : timerfd_clock_was_set();
776 : 11 : }
777 : :
778 : : /*
779 : : * During resume we might have to reprogram the high resolution timer
780 : : * interrupt on all online CPUs. However, all other CPUs will be
781 : : * stopped with IRQs interrupts disabled so the clock_was_set() call
782 : : * must be deferred.
783 : : */
784 : 0 : void hrtimers_resume(void)
785 : : {
786 [ # # ][ # # ]: 0 : WARN_ONCE(!irqs_disabled(),
[ # # ]
787 : : KERN_INFO "hrtimers_resume() called with IRQs enabled!");
788 : :
789 : : /* Retrigger on the local CPU */
790 : 0 : retrigger_next_event(NULL);
791 : : /* And schedule a retrigger for all others */
792 : : clock_was_set_delayed();
793 : 0 : }
794 : :
795 : : static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
796 : : {
797 : : #ifdef CONFIG_TIMER_STATS
798 [ + + ]: 8628754 : if (timer->start_site)
799 : : return;
800 : 8508416 : timer->start_site = __builtin_return_address(0);
801 : 17067402 : memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
802 : 8533701 : timer->start_pid = current->pid;
803 : : #endif
804 : : }
805 : :
806 : : static inline void timer_stats_hrtimer_clear_start_info(struct hrtimer *timer)
807 : : {
808 : : #ifdef CONFIG_TIMER_STATS
809 : 2479718 : timer->start_site = NULL;
810 : : #endif
811 : : }
812 : :
813 : : static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
814 : : {
815 : : #ifdef CONFIG_TIMER_STATS
816 [ - + ]: 3721232 : if (likely(!timer_stats_active))
817 : : return;
818 : 0 : timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
819 : 0 : timer->function, timer->start_comm, 0);
820 : : #endif
821 : : }
822 : :
823 : : /*
824 : : * Counterpart to lock_hrtimer_base above:
825 : : */
826 : : static inline
827 : : void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
828 : : {
829 : 14312893 : raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
830 : : }
831 : :
832 : : /**
833 : : * hrtimer_forward - forward the timer expiry
834 : : * @timer: hrtimer to forward
835 : : * @now: forward past this time
836 : : * @interval: the interval to forward
837 : : *
838 : : * Forward the timer expiry so it will expire in the future.
839 : : * Returns the number of overruns.
840 : : */
841 : 0 : u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
842 : : {
843 : : u64 orun = 1;
844 : : ktime_t delta;
845 : :
846 : 7010524 : delta = ktime_sub(now, hrtimer_get_expires(timer));
847 : :
848 [ + + ]: 7010524 : if (delta.tv64 < 0)
849 : : return 0;
850 : :
851 [ - + ]: 5042811 : if (interval.tv64 < timer->base->resolution.tv64)
852 : : interval.tv64 = timer->base->resolution.tv64;
853 : :
854 [ + + ]: 5042811 : if (unlikely(delta.tv64 >= interval.tv64)) {
855 : : s64 incr = ktime_to_ns(interval);
856 : :
857 : 1227288 : orun = ktime_divns(delta, incr);
858 : 1119487 : hrtimer_add_expires_ns(timer, incr * orun);
859 [ + + ]: 1119487 : if (hrtimer_get_expires_tv64(timer) > now.tv64)
860 : : return orun;
861 : : /*
862 : : * This (and the ktime_add() below) is the
863 : : * correction for exact:
864 : : */
865 : 1118827 : orun++;
866 : : }
867 : : hrtimer_add_expires(timer, interval);
868 : :
869 : 5051107 : return orun;
870 : : }
871 : : EXPORT_SYMBOL_GPL(hrtimer_forward);
872 : :
873 : : /*
874 : : * enqueue_hrtimer - internal function to (re)start a timer
875 : : *
876 : : * The timer is inserted in expiry order. Insertion into the
877 : : * red black tree is O(log(n)). Must hold the base lock.
878 : : *
879 : : * Returns 1 when the new timer is the leftmost timer in the tree.
880 : : */
881 : 0 : static int enqueue_hrtimer(struct hrtimer *timer,
882 : : struct hrtimer_clock_base *base)
883 : : {
884 : : debug_activate(timer);
885 : :
886 : 11909084 : timerqueue_add(&base->active, &timer->node);
887 : 12023416 : base->cpu_base->active_bases |= 1 << base->index;
888 : :
889 : : /*
890 : : * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
891 : : * state of a possibly running callback.
892 : : */
893 : 12023416 : timer->state |= HRTIMER_STATE_ENQUEUED;
894 : :
895 : 12023416 : return (&timer->node == base->active.next);
896 : : }
897 : :
898 : : /*
899 : : * __remove_hrtimer - internal function to remove a timer
900 : : *
901 : : * Caller must hold the base lock.
902 : : *
903 : : * High resolution timer mode reprograms the clock event device when the
904 : : * timer is the one which expires next. The caller can disable this by setting
905 : : * reprogram to zero. This is useful, when the context does a reprogramming
906 : : * anyway (e.g. timer interrupt)
907 : : */
908 : 0 : static void __remove_hrtimer(struct hrtimer *timer,
909 : : struct hrtimer_clock_base *base,
910 : : unsigned long newstate, int reprogram)
911 : : {
912 : : struct timerqueue_node *next_timer;
913 [ + ]: 11980756 : if (!(timer->state & HRTIMER_STATE_ENQUEUED))
914 : : goto out;
915 : :
916 : 24053532 : next_timer = timerqueue_getnext(&base->active);
917 : 12004678 : timerqueue_del(&base->active, &timer->node);
918 [ + + ]: 12009986 : if (&timer->node == next_timer) {
919 : : #ifdef CONFIG_HIGH_RES_TIMERS
920 : : /* Reprogram the clock event device. if enabled */
921 [ + + ][ + ]: 11679713 : if (reprogram && hrtimer_hres_active()) {
922 : : ktime_t expires;
923 : :
924 : 7918540 : expires = ktime_sub(hrtimer_get_expires(timer),
925 : : base->offset);
926 [ + + ]: 7918540 : if (base->cpu_base->expires_next.tv64 == expires.tv64)
927 : 7413683 : hrtimer_force_reprogram(base->cpu_base, 1);
928 : : }
929 : : #endif
930 : : }
931 [ + + ]: 24029610 : if (!timerqueue_getnext(&base->active))
932 : 5269147 : base->cpu_base->active_bases &= ~(1 << base->index);
933 : : out:
934 : 12024932 : timer->state = newstate;
935 : 12024932 : }
936 : :
937 : : /*
938 : : * remove hrtimer, called with base lock held
939 : : */
940 : : static inline int
941 : 8625436 : remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
942 : : {
943 [ + + + + ]: 14269692 : if (hrtimer_is_queued(timer)) {
944 : : unsigned long state;
945 : : int reprogram;
946 : :
947 : : /*
948 : : * Remove the timer and force reprogramming when high
949 : : * resolution mode is active and the timer is on the current
950 : : * CPU. If we remove a timer on another CPU, reprogramming is
951 : : * skipped. The interrupt event on this CPU is fired and
952 : : * reprogramming happens in the interrupt handler. This is a
953 : : * rare case and less expensive than a smp call.
954 : : */
955 : : debug_deactivate(timer);
956 : : timer_stats_hrtimer_clear_start_info(timer);
957 : 4959436 : reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
958 : : /*
959 : : * We must preserve the CALLBACK state flag here,
960 : : * otherwise we could move the timer base in
961 : : * switch_hrtimer_base.
962 : : */
963 : 2479718 : state = timer->state & HRTIMER_STATE_CALLBACK;
964 : 9971714 : __remove_hrtimer(timer, base, state, reprogram);
965 : : return 1;
966 : : }
967 : : return 0;
968 : : }
969 : :
970 : 0 : int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
971 : : unsigned long delta_ns, const enum hrtimer_mode mode,
972 : : int wakeup)
973 : : {
974 : : struct hrtimer_clock_base *base, *new_base;
975 : : unsigned long flags;
976 : : int ret, leftmost;
977 : :
978 : 8509750 : base = lock_hrtimer_base(timer, &flags);
979 : :
980 : : /* Remove an active timer from the queue: */
981 : : ret = remove_hrtimer(timer, base);
982 : :
983 : : /* Switch the timer base, if necessary: */
984 : 8632817 : new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
985 : :
986 [ + + ]: 8532949 : if (mode & HRTIMER_MODE_REL) {
987 : 261521 : tim = ktime_add_safe(tim, new_base->get_time());
988 : : /*
989 : : * CONFIG_TIME_LOW_RES is a temporary way for architectures
990 : : * to signal that they simply return xtime in
991 : : * do_gettimeoffset(). In this case we want to round up by
992 : : * resolution when starting a relative timer, to avoid short
993 : : * timeouts. This will go away with the GTOD framework.
994 : : */
995 : : #ifdef CONFIG_TIME_LOW_RES
996 : : tim = ktime_add_safe(tim, base->resolution);
997 : : #endif
998 : : }
999 : :
1000 : : hrtimer_set_expires_range_ns(timer, tim, delta_ns);
1001 : :
1002 : : timer_stats_hrtimer_set_start_info(timer);
1003 : :
1004 : 8654039 : leftmost = enqueue_hrtimer(timer, new_base);
1005 : :
1006 : : /*
1007 : : * Only allow reprogramming if the new base is on this CPU.
1008 : : * (it might still be on another CPU if the timer was pending)
1009 : : *
1010 : : * XXX send_remote_softirq() ?
1011 : : */
1012 [ + + ][ + + ]: 8557477 : if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
1013 [ + + ]: 8185674 : && hrtimer_enqueue_reprogram(timer, new_base)) {
1014 [ + - ]: 2799 : if (wakeup) {
1015 : : /*
1016 : : * We need to drop cpu_base->lock to avoid a
1017 : : * lock ordering issue vs. rq->lock.
1018 : : */
1019 : 2799 : raw_spin_unlock(&new_base->cpu_base->lock);
1020 : 2800 : raise_softirq_irqoff(HRTIMER_SOFTIRQ);
1021 [ + + ]: 2800 : local_irq_restore(flags);
1022 : : return ret;
1023 : : } else {
1024 : 0 : __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
1025 : : }
1026 : : }
1027 : :
1028 : 8639401 : unlock_hrtimer_base(timer, &flags);
1029 : :
1030 : 8612425 : return ret;
1031 : : }
1032 : :
1033 : : /**
1034 : : * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
1035 : : * @timer: the timer to be added
1036 : : * @tim: expiry time
1037 : : * @delta_ns: "slack" range for the timer
1038 : : * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
1039 : : * relative (HRTIMER_MODE_REL)
1040 : : *
1041 : : * Returns:
1042 : : * 0 on success
1043 : : * 1 when the timer was active
1044 : : */
1045 : 0 : int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
1046 : : unsigned long delta_ns, const enum hrtimer_mode mode)
1047 : : {
1048 : 4273732 : return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1);
1049 : : }
1050 : : EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
1051 : :
1052 : : /**
1053 : : * hrtimer_start - (re)start an hrtimer on the current CPU
1054 : : * @timer: the timer to be added
1055 : : * @tim: expiry time
1056 : : * @mode: expiry mode: absolute (HRTIMER_MODE_ABS) or
1057 : : * relative (HRTIMER_MODE_REL)
1058 : : *
1059 : : * Returns:
1060 : : * 0 on success
1061 : : * 1 when the timer was active
1062 : : */
1063 : : int
1064 : 0 : hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
1065 : : {
1066 : 4320997 : return __hrtimer_start_range_ns(timer, tim, 0, mode, 1);
1067 : : }
1068 : : EXPORT_SYMBOL_GPL(hrtimer_start);
1069 : :
1070 : :
1071 : : /**
1072 : : * hrtimer_try_to_cancel - try to deactivate a timer
1073 : : * @timer: hrtimer to stop
1074 : : *
1075 : : * Returns:
1076 : : * 0 when the timer was not active
1077 : : * 1 when the timer was active
1078 : : * -1 when the timer is currently excuting the callback function and
1079 : : * cannot be stopped
1080 : : */
1081 : 0 : int hrtimer_try_to_cancel(struct hrtimer *timer)
1082 : : {
1083 : : struct hrtimer_clock_base *base;
1084 : : unsigned long flags;
1085 : : int ret = -1;
1086 : :
1087 : 5660262 : base = lock_hrtimer_base(timer, &flags);
1088 : :
1089 [ + + ]: 5651396 : if (!hrtimer_callback_running(timer))
1090 : : ret = remove_hrtimer(timer, base);
1091 : :
1092 : 5668205 : unlock_hrtimer_base(timer, &flags);
1093 : :
1094 : 5662428 : return ret;
1095 : :
1096 : : }
1097 : : EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
1098 : :
1099 : : /**
1100 : : * hrtimer_cancel - cancel a timer and wait for the handler to finish.
1101 : : * @timer: the timer to be cancelled
1102 : : *
1103 : : * Returns:
1104 : : * 0 when the timer was not active
1105 : : * 1 when the timer was active
1106 : : */
1107 : 5388445 : int hrtimer_cancel(struct hrtimer *timer)
1108 : : {
1109 : : for (;;) {
1110 : 5656266 : int ret = hrtimer_try_to_cancel(timer);
1111 : :
1112 [ + - + - : 5711825 : if (ret >= 0)
+ - ]
1113 : 5389300 : return ret;
1114 : 3994 : cpu_relax();
1115 : 0 : }
1116 : : }
1117 : : EXPORT_SYMBOL_GPL(hrtimer_cancel);
1118 : :
1119 : : /**
1120 : : * hrtimer_get_remaining - get remaining time for the timer
1121 : : * @timer: the timer to read
1122 : : */
1123 : 0 : ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
1124 : : {
1125 : : unsigned long flags;
1126 : : ktime_t rem;
1127 : :
1128 : 5287 : lock_hrtimer_base(timer, &flags);
1129 : : rem = hrtimer_expires_remaining(timer);
1130 : 5287 : unlock_hrtimer_base(timer, &flags);
1131 : :
1132 : 5287 : return rem;
1133 : : }
1134 : : EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
1135 : :
1136 : : #ifdef CONFIG_NO_HZ_COMMON
1137 : : /**
1138 : : * hrtimer_get_next_event - get the time until next expiry event
1139 : : *
1140 : : * Returns the delta to the next expiry event or KTIME_MAX if no timer
1141 : : * is pending.
1142 : : */
1143 : 0 : ktime_t hrtimer_get_next_event(void)
1144 : : {
1145 : 12057040 : struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1146 : 6028520 : struct hrtimer_clock_base *base = cpu_base->clock_base;
1147 : : ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
1148 : : unsigned long flags;
1149 : : int i;
1150 : :
1151 : 6028520 : raw_spin_lock_irqsave(&cpu_base->lock, flags);
1152 : :
1153 [ - + ]: 6030279 : if (!hrtimer_hres_active()) {
1154 [ # # ]: 0 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
1155 : 0 : struct hrtimer *timer;
1156 : : struct timerqueue_node *next;
1157 : :
1158 : 0 : next = timerqueue_getnext(&base->active);
1159 [ # # ]: 0 : if (!next)
1160 : 0 : continue;
1161 : :
1162 : : timer = container_of(next, struct hrtimer, node);
1163 : : delta.tv64 = hrtimer_get_expires_tv64(timer);
1164 : 0 : delta = ktime_sub(delta, base->get_time());
1165 [ # # ]: 0 : if (delta.tv64 < mindelta.tv64)
1166 : : mindelta.tv64 = delta.tv64;
1167 : : }
1168 : : }
1169 : :
1170 : 6030279 : raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
1171 : :
1172 [ - + ]: 6032159 : if (mindelta.tv64 < 0)
1173 : : mindelta.tv64 = 0;
1174 : 6032159 : return mindelta;
1175 : : }
1176 : : #endif
1177 : :
1178 : 0 : static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1179 : : enum hrtimer_mode mode)
1180 : : {
1181 : : struct hrtimer_cpu_base *cpu_base;
1182 : : int base;
1183 : :
1184 : 1795867 : memset(timer, 0, sizeof(struct hrtimer));
1185 : :
1186 : 3591958 : cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1187 : :
1188 [ + + ]: 1795979 : if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
1189 : : clock_id = CLOCK_MONOTONIC;
1190 : :
1191 : : base = hrtimer_clockid_to_base(clock_id);
1192 : 112 : timer->base = &cpu_base->clock_base[base];
1193 : : timerqueue_init(&timer->node);
1194 : :
1195 : : #ifdef CONFIG_TIMER_STATS
1196 : 112 : timer->start_site = NULL;
1197 : 112 : timer->start_pid = -1;
1198 : 1795979 : memset(timer->start_comm, 0, TASK_COMM_LEN);
1199 : : #endif
1200 : 1795806 : }
1201 : :
1202 : : /**
1203 : : * hrtimer_init - initialize a timer to the given clock
1204 : : * @timer: the timer to be initialized
1205 : : * @clock_id: the clock to be used
1206 : : * @mode: timer mode abs/rel
1207 : : */
1208 : 0 : void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1209 : : enum hrtimer_mode mode)
1210 : : {
1211 : : debug_init(timer, clock_id, mode);
1212 : 1795876 : __hrtimer_init(timer, clock_id, mode);
1213 : 1795649 : }
1214 : : EXPORT_SYMBOL_GPL(hrtimer_init);
1215 : :
1216 : : /**
1217 : : * hrtimer_get_res - get the timer resolution for a clock
1218 : : * @which_clock: which clock to query
1219 : : * @tp: pointer to timespec variable to store the resolution
1220 : : *
1221 : : * Store the resolution of the clock selected by @which_clock in the
1222 : : * variable pointed to by @tp.
1223 : : */
1224 : 0 : int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
1225 : : {
1226 : : struct hrtimer_cpu_base *cpu_base;
1227 : : int base = hrtimer_clockid_to_base(which_clock);
1228 : :
1229 : 22 : cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1230 : 11 : *tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
1231 : :
1232 : 11 : return 0;
1233 : : }
1234 : : EXPORT_SYMBOL_GPL(hrtimer_get_res);
1235 : :
1236 : 0 : static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
1237 : : {
1238 : 3750131 : struct hrtimer_clock_base *base = timer->base;
1239 : 3750131 : struct hrtimer_cpu_base *cpu_base = base->cpu_base;
1240 : : enum hrtimer_restart (*fn)(struct hrtimer *);
1241 : : int restart;
1242 : :
1243 [ - + ]: 3748393 : WARN_ON(!irqs_disabled());
1244 : :
1245 : : debug_deactivate(timer);
1246 : 3762930 : __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
1247 : : timer_stats_account_hrtimer(timer);
1248 : 3721232 : fn = timer->function;
1249 : :
1250 : : /*
1251 : : * Because we run timers from hardirq context, there is no chance
1252 : : * they get migrated to another cpu, therefore its safe to unlock
1253 : : * the timer base.
1254 : : */
1255 : : raw_spin_unlock(&cpu_base->lock);
1256 : : trace_hrtimer_expire_entry(timer, now);
1257 : 3779905 : restart = fn(timer);
1258 : : trace_hrtimer_expire_exit(timer);
1259 : 3780117 : raw_spin_lock(&cpu_base->lock);
1260 : :
1261 : : /*
1262 : : * Note: We clear the CALLBACK bit after enqueue_hrtimer and
1263 : : * we do not reprogramm the event hardware. Happens either in
1264 : : * hrtimer_start_range_ns() or in hrtimer_interrupt()
1265 : : */
1266 [ + + ]: 3754074 : if (restart != HRTIMER_NORESTART) {
1267 [ - + ]: 3419400 : BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
1268 : 3419400 : enqueue_hrtimer(timer, base);
1269 : : }
1270 : :
1271 [ - + ][ # # ]: 3762492 : WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK));
[ # # ]
1272 : :
1273 : 3762492 : timer->state &= ~HRTIMER_STATE_CALLBACK;
1274 : 3762492 : }
1275 : :
1276 : : #ifdef CONFIG_HIGH_RES_TIMERS
1277 : :
1278 : : /*
1279 : : * High resolution timer interrupt
1280 : : * Called with interrupts disabled
1281 : : */
1282 : 0 : void hrtimer_interrupt(struct clock_event_device *dev)
1283 : : {
1284 : 7454842 : struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1285 : : ktime_t expires_next, now, entry_time, delta;
1286 : : int i, retries = 0;
1287 : :
1288 [ - + ]: 3727421 : BUG_ON(!cpu_base->hres_active);
1289 : 3727421 : cpu_base->nr_events++;
1290 : 3727421 : dev->next_event.tv64 = KTIME_MAX;
1291 : :
1292 : 3727421 : raw_spin_lock(&cpu_base->lock);
1293 : : entry_time = now = hrtimer_update_base(cpu_base);
1294 : : retry:
1295 : : expires_next.tv64 = KTIME_MAX;
1296 : : /*
1297 : : * We set expires_next to KTIME_MAX here with cpu_base->lock
1298 : : * held to prevent that a timer is enqueued in our queue via
1299 : : * the migration code. This does not affect enqueueing of
1300 : : * timers which run their callback and need to be requeued on
1301 : : * this CPU.
1302 : : */
1303 : 3703746 : cpu_base->expires_next.tv64 = KTIME_MAX;
1304 : :
1305 [ + + ]: 18659033 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1306 : : struct hrtimer_clock_base *base;
1307 : : struct timerqueue_node *node;
1308 : : ktime_t basenow;
1309 : :
1310 [ + + ]: 14912025 : if (!(cpu_base->active_bases & (1 << i)))
1311 : 11142645 : continue;
1312 : :
1313 : 3769380 : base = cpu_base->clock_base + i;
1314 : 3769380 : basenow = ktime_add(now, base->offset);
1315 : :
1316 [ + + ]: 14981811 : while ((node = timerqueue_getnext(&base->active))) {
1317 : 7441748 : struct hrtimer *timer;
1318 : :
1319 : : timer = container_of(node, struct hrtimer, node);
1320 : :
1321 : : /*
1322 : : * The immediate goal for using the softexpires is
1323 : : * minimizing wakeups, not running timers at the
1324 : : * earliest interrupt after their soft expiration.
1325 : : * This allows us to avoid using a Priority Search
1326 : : * Tree, which can answer a stabbing querry for
1327 : : * overlapping intervals and instead use the simple
1328 : : * BST we already have.
1329 : : * We don't add extra wakeups by delaying timers that
1330 : : * are right-of a not yet expired timer, because that
1331 : : * timer will have to trigger a wakeup anyway.
1332 : : */
1333 : :
1334 [ + + ]: 7441748 : if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
1335 : : ktime_t expires;
1336 : :
1337 : 3656808 : expires = ktime_sub(hrtimer_get_expires(timer),
1338 : : base->offset);
1339 [ - + ]: 3656808 : if (expires.tv64 < 0)
1340 : : expires.tv64 = KTIME_MAX;
1341 [ + ]: 3656808 : if (expires.tv64 < expires_next.tv64)
1342 : : expires_next = expires;
1343 : : break;
1344 : : }
1345 : :
1346 : 3784940 : __run_hrtimer(timer, &basenow);
1347 : : }
1348 : : }
1349 : :
1350 : : /*
1351 : : * Store the new expiry value so the migration code can verify
1352 : : * against it.
1353 : : */
1354 : 3747008 : cpu_base->expires_next = expires_next;
1355 : : raw_spin_unlock(&cpu_base->lock);
1356 : :
1357 : : /* Reprogramming necessary ? */
1358 [ + + + + ]: 7462800 : if (expires_next.tv64 == KTIME_MAX ||
1359 : 3714317 : !tick_program_event(expires_next, 0)) {
1360 : 3748286 : cpu_base->hang_detected = 0;
1361 : 3748286 : return;
1362 : : }
1363 : :
1364 : : /*
1365 : : * The next timer was already expired due to:
1366 : : * - tracing
1367 : : * - long lasting callbacks
1368 : : * - being scheduled away when running in a VM
1369 : : *
1370 : : * We need to prevent that we loop forever in the hrtimer
1371 : : * interrupt routine. We give it 3 attempts to avoid
1372 : : * overreacting on some spurious event.
1373 : : *
1374 : : * Acquire base lock for updating the offsets and retrieving
1375 : : * the current time.
1376 : : */
1377 : 197 : raw_spin_lock(&cpu_base->lock);
1378 : 198 : now = hrtimer_update_base(cpu_base);
1379 : 198 : cpu_base->nr_retries++;
1380 [ + - ]: 198 : if (++retries < 3)
1381 : : goto retry;
1382 : : /*
1383 : : * Give the system a chance to do something else than looping
1384 : : * here. We stored the entry time, so we know exactly how long
1385 : : * we spent here. We schedule the next event this amount of
1386 : : * time away.
1387 : : */
1388 : 0 : cpu_base->nr_hangs++;
1389 : 0 : cpu_base->hang_detected = 1;
1390 : : raw_spin_unlock(&cpu_base->lock);
1391 : 0 : delta = ktime_sub(now, entry_time);
1392 [ # # ]: 0 : if (delta.tv64 > cpu_base->max_hang_time.tv64)
1393 : 0 : cpu_base->max_hang_time = delta;
1394 : : /*
1395 : : * Limit it to a sensible value as we enforce a longer
1396 : : * delay. Give the CPU at least 100ms to catch up.
1397 : : */
1398 [ # # ]: 0 : if (delta.tv64 > 100 * NSEC_PER_MSEC)
1399 : 0 : expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
1400 : : else
1401 : 0 : expires_next = ktime_add(now, delta);
1402 : 0 : tick_program_event(expires_next, 1);
1403 [ # # ]: 0 : printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n",
1404 : : ktime_to_ns(delta));
1405 : : }
1406 : :
1407 : : /*
1408 : : * local version of hrtimer_peek_ahead_timers() called with interrupts
1409 : : * disabled.
1410 : : */
1411 : 0 : static void __hrtimer_peek_ahead_timers(void)
1412 : : {
1413 : : struct tick_device *td;
1414 : :
1415 [ + + ]: 2799 : if (!hrtimer_hres_active())
1416 : 2 : return;
1417 : :
1418 : 5596 : td = &__get_cpu_var(tick_cpu_device);
1419 [ + ][ + + ]: 2798 : if (td && td->evtdev)
1420 : 2798 : hrtimer_interrupt(td->evtdev);
1421 : : }
1422 : :
1423 : : /**
1424 : : * hrtimer_peek_ahead_timers -- run soft-expired timers now
1425 : : *
1426 : : * hrtimer_peek_ahead_timers will peek at the timer queue of
1427 : : * the current cpu and check if there are any timers for which
1428 : : * the soft expires time has passed. If any such timers exist,
1429 : : * they are run immediately and then removed from the timer queue.
1430 : : *
1431 : : */
1432 : 0 : void hrtimer_peek_ahead_timers(void)
1433 : : {
1434 : : unsigned long flags;
1435 : :
1436 : : local_irq_save(flags);
1437 : 2798 : __hrtimer_peek_ahead_timers();
1438 [ - + ]: 2800 : local_irq_restore(flags);
1439 : 2800 : }
1440 : :
1441 : 0 : static void run_hrtimer_softirq(struct softirq_action *h)
1442 : : {
1443 : 2797 : hrtimer_peek_ahead_timers();
1444 : 2799 : }
1445 : :
1446 : : #else /* CONFIG_HIGH_RES_TIMERS */
1447 : :
1448 : : static inline void __hrtimer_peek_ahead_timers(void) { }
1449 : :
1450 : : #endif /* !CONFIG_HIGH_RES_TIMERS */
1451 : :
1452 : : /*
1453 : : * Called from timer softirq every jiffy, expire hrtimers:
1454 : : *
1455 : : * For HRT its the fall back code to run the softirq in the timer
1456 : : * softirq context in case the hrtimer initialization failed or has
1457 : : * not been done yet.
1458 : : */
1459 : 0 : void hrtimer_run_pending(void)
1460 : : {
1461 [ - + ]: 3350359 : if (hrtimer_hres_active())
1462 : 0 : return;
1463 : :
1464 : : /*
1465 : : * This _is_ ugly: We have to check in the softirq context,
1466 : : * whether we can switch to highres and / or nohz mode. The
1467 : : * clocksource switch happens in the timer interrupt with
1468 : : * xtime_lock held. Notification from there only sets the
1469 : : * check bit in the tick_oneshot code, otherwise we might
1470 : : * deadlock vs. xtime_lock.
1471 : : */
1472 [ # # ]: 0 : if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
1473 : 0 : hrtimer_switch_to_hres();
1474 : : }
1475 : :
1476 : : /*
1477 : : * Called from hardirq context every jiffy
1478 : : */
1479 : 0 : void hrtimer_run_queues(void)
1480 : : {
1481 : : struct timerqueue_node *node;
1482 : 6772152 : struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1483 : : struct hrtimer_clock_base *base;
1484 : : int index, gettime = 1;
1485 : :
1486 [ - + ]: 3386076 : if (hrtimer_hres_active())
1487 : 3386076 : return;
1488 : :
1489 [ # # ]: 0 : for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
1490 : 0 : base = &cpu_base->clock_base[index];
1491 [ # # ]: 0 : if (!timerqueue_getnext(&base->active))
1492 : 0 : continue;
1493 : :
1494 [ # # ]: 0 : if (gettime) {
1495 : 0 : hrtimer_get_softirq_time(cpu_base);
1496 : : gettime = 0;
1497 : : }
1498 : :
1499 : 0 : raw_spin_lock(&cpu_base->lock);
1500 : :
1501 [ # # ]: 0 : while ((node = timerqueue_getnext(&base->active))) {
1502 : 0 : struct hrtimer *timer;
1503 : :
1504 : : timer = container_of(node, struct hrtimer, node);
1505 [ # # ]: 0 : if (base->softirq_time.tv64 <=
1506 : : hrtimer_get_expires_tv64(timer))
1507 : : break;
1508 : :
1509 : 0 : __run_hrtimer(timer, &base->softirq_time);
1510 : : }
1511 : : raw_spin_unlock(&cpu_base->lock);
1512 : : }
1513 : : }
1514 : :
1515 : : /*
1516 : : * Sleep related functions:
1517 : : */
1518 : 0 : static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
1519 : : {
1520 : : struct hrtimer_sleeper *t =
1521 : : container_of(timer, struct hrtimer_sleeper, timer);
1522 : 363653 : struct task_struct *task = t->task;
1523 : :
1524 : 363653 : t->task = NULL;
1525 [ + ]: 363653 : if (task)
1526 : 363724 : wake_up_process(task);
1527 : :
1528 : 491 : return HRTIMER_NORESTART;
1529 : : }
1530 : :
1531 : 0 : void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
1532 : : {
1533 : 675203 : sl->timer.function = hrtimer_wakeup;
1534 : 259803 : sl->task = task;
1535 : 406174 : }
1536 : : EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
1537 : :
1538 : 0 : static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
1539 : : {
1540 : 259803 : hrtimer_init_sleeper(t, current);
1541 : :
1542 : : do {
1543 : 259803 : set_current_state(TASK_INTERRUPTIBLE);
1544 : 519010 : hrtimer_start_expires(&t->timer, mode);
1545 [ + + ]: 259537 : if (!hrtimer_active(&t->timer))
1546 : 5015 : t->task = NULL;
1547 : :
1548 [ + + ]: 259537 : if (likely(t->task))
1549 : : freezable_schedule();
1550 : :
1551 : : hrtimer_cancel(&t->timer);
1552 : : mode = HRTIMER_MODE_ABS;
1553 : :
1554 [ + + ][ - + ]: 258934 : } while (t->task && !signal_pending(current));
1555 : :
1556 : 258934 : __set_current_state(TASK_RUNNING);
1557 : :
1558 : 258934 : return t->task == NULL;
1559 : : }
1560 : :
1561 : 0 : static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
1562 : : {
1563 : : struct timespec rmt;
1564 : : ktime_t rem;
1565 : :
1566 : : rem = hrtimer_expires_remaining(timer);
1567 [ + - ]: 278 : if (rem.tv64 <= 0)
1568 : : return 0;
1569 : 278 : rmt = ktime_to_timespec(rem);
1570 : :
1571 [ + - ]: 556 : if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
1572 : : return -EFAULT;
1573 : :
1574 : 278 : return 1;
1575 : : }
1576 : :
1577 : 0 : long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
1578 : : {
1579 : : struct hrtimer_sleeper t;
1580 : : struct timespec __user *rmtp;
1581 : : int ret = 0;
1582 : :
1583 : 1 : hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
1584 : : HRTIMER_MODE_ABS);
1585 : 1 : hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
1586 : :
1587 [ - + ]: 1 : if (do_nanosleep(&t, HRTIMER_MODE_ABS))
1588 : : goto out;
1589 : :
1590 : 0 : rmtp = restart->nanosleep.rmtp;
1591 [ # # ]: 0 : if (rmtp) {
1592 : 0 : ret = update_rmtp(&t.timer, rmtp);
1593 [ # # ]: 0 : if (ret <= 0)
1594 : : goto out;
1595 : : }
1596 : :
1597 : : /* The other values in restart are already filled in */
1598 : : ret = -ERESTART_RESTARTBLOCK;
1599 : : out:
1600 : : destroy_hrtimer_on_stack(&t.timer);
1601 : 0 : return ret;
1602 : : }
1603 : :
1604 : 0 : long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
1605 : : const enum hrtimer_mode mode, const clockid_t clockid)
1606 : : {
1607 : : struct restart_block *restart;
1608 : : struct hrtimer_sleeper t;
1609 : : int ret = 0;
1610 : : unsigned long slack;
1611 : :
1612 : 259487 : slack = current->timer_slack_ns;
1613 [ + + ]: 259487 : if (rt_task(current))
1614 : : slack = 0;
1615 : :
1616 : : hrtimer_init_on_stack(&t.timer, clockid, mode);
1617 : : hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
1618 [ + + ]: 259818 : if (do_nanosleep(&t, mode))
1619 : : goto out;
1620 : :
1621 : : /* Absolute timers do not update the rmtp value and restart: */
1622 [ + - ]: 295 : if (mode == HRTIMER_MODE_ABS) {
1623 : : ret = -ERESTARTNOHAND;
1624 : : goto out;
1625 : : }
1626 : :
1627 [ + + ]: 295 : if (rmtp) {
1628 : 278 : ret = update_rmtp(&t.timer, rmtp);
1629 [ + - ]: 278 : if (ret <= 0)
1630 : : goto out;
1631 : : }
1632 : :
1633 : : restart = ¤t_thread_info()->restart_block;
1634 : 295 : restart->fn = hrtimer_nanosleep_restart;
1635 : 295 : restart->nanosleep.clockid = t.timer.base->clockid;
1636 : 295 : restart->nanosleep.rmtp = rmtp;
1637 : 295 : restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
1638 : :
1639 : : ret = -ERESTART_RESTARTBLOCK;
1640 : : out:
1641 : : destroy_hrtimer_on_stack(&t.timer);
1642 : 258806 : return ret;
1643 : : }
1644 : :
1645 : 0 : SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
1646 : : struct timespec __user *, rmtp)
1647 : : {
1648 : : struct timespec tu;
1649 : :
1650 [ + - ]: 259523 : if (copy_from_user(&tu, rqtp, sizeof(tu)))
1651 : : return -EFAULT;
1652 : :
1653 [ + ]: 259523 : if (!timespec_valid(&tu))
1654 : : return -EINVAL;
1655 : :
1656 : 259689 : return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
1657 : : }
1658 : :
1659 : : /*
1660 : : * Functions related to boot-time initialization:
1661 : : */
1662 : : static void init_hrtimers_cpu(int cpu)
1663 : : {
1664 : 0 : struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
1665 : : int i;
1666 : :
1667 [ # # ]: 0 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1668 : 0 : cpu_base->clock_base[i].cpu_base = cpu_base;
1669 : 0 : timerqueue_init_head(&cpu_base->clock_base[i].active);
1670 : : }
1671 : :
1672 : : hrtimer_init_hres(cpu_base);
1673 : : }
1674 : :
1675 : : #ifdef CONFIG_HOTPLUG_CPU
1676 : :
1677 : 0 : static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
1678 : : struct hrtimer_clock_base *new_base)
1679 : : {
1680 : 0 : struct hrtimer *timer;
1681 : : struct timerqueue_node *node;
1682 : :
1683 [ # # ]: 0 : while ((node = timerqueue_getnext(&old_base->active))) {
1684 : : timer = container_of(node, struct hrtimer, node);
1685 [ # # ]: 0 : BUG_ON(hrtimer_callback_running(timer));
1686 : : debug_deactivate(timer);
1687 : :
1688 : : /*
1689 : : * Mark it as STATE_MIGRATE not INACTIVE otherwise the
1690 : : * timer could be seen as !active and just vanish away
1691 : : * under us on another CPU
1692 : : */
1693 : 0 : __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
1694 : 0 : timer->base = new_base;
1695 : : /*
1696 : : * Enqueue the timers on the new cpu. This does not
1697 : : * reprogram the event device in case the timer
1698 : : * expires before the earliest on this CPU, but we run
1699 : : * hrtimer_interrupt after we migrated everything to
1700 : : * sort out already expired timers and reprogram the
1701 : : * event device.
1702 : : */
1703 : 0 : enqueue_hrtimer(timer, new_base);
1704 : :
1705 : : /* Clear the migration state bit */
1706 : 0 : timer->state &= ~HRTIMER_STATE_MIGRATE;
1707 : : }
1708 : 0 : }
1709 : :
1710 : 0 : static void migrate_hrtimers(int scpu)
1711 : : {
1712 : : struct hrtimer_cpu_base *old_base, *new_base;
1713 : : int i;
1714 : :
1715 [ # # ]: 0 : BUG_ON(cpu_online(scpu));
1716 : 0 : tick_cancel_sched_timer(scpu);
1717 : :
1718 : : local_irq_disable();
1719 : 0 : old_base = &per_cpu(hrtimer_bases, scpu);
1720 : 0 : new_base = &__get_cpu_var(hrtimer_bases);
1721 : : /*
1722 : : * The caller is globally serialized and nobody else
1723 : : * takes two locks at once, deadlock is not possible.
1724 : : */
1725 : 0 : raw_spin_lock(&new_base->lock);
1726 : 0 : raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
1727 : :
1728 [ # # ]: 0 : for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1729 : 0 : migrate_hrtimer_list(&old_base->clock_base[i],
1730 : : &new_base->clock_base[i]);
1731 : : }
1732 : :
1733 : : raw_spin_unlock(&old_base->lock);
1734 : : raw_spin_unlock(&new_base->lock);
1735 : :
1736 : : /* Check, if we got expired work to do */
1737 : 0 : __hrtimer_peek_ahead_timers();
1738 : : local_irq_enable();
1739 : 0 : }
1740 : :
1741 : : #endif /* CONFIG_HOTPLUG_CPU */
1742 : :
1743 : 0 : static int hrtimer_cpu_notify(struct notifier_block *self,
1744 : : unsigned long action, void *hcpu)
1745 : : {
1746 [ # # ][ # # ]: 0 : int scpu = (long)hcpu;
[ # # ][ # # ]
1747 : :
1748 : : switch (action) {
1749 : :
1750 : : case CPU_UP_PREPARE:
1751 : : case CPU_UP_PREPARE_FROZEN:
1752 : : init_hrtimers_cpu(scpu);
1753 : : break;
1754 : :
1755 : : #ifdef CONFIG_HOTPLUG_CPU
1756 : : case CPU_DYING:
1757 : : case CPU_DYING_FROZEN:
1758 : 0 : clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
1759 : 0 : break;
1760 : : case CPU_DEAD:
1761 : : case CPU_DEAD_FROZEN:
1762 : : {
1763 : 0 : clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
1764 : 0 : migrate_hrtimers(scpu);
1765 : 0 : break;
1766 : : }
1767 : : #endif
1768 : :
1769 : : default:
1770 : : break;
1771 : : }
1772 : :
1773 : 0 : return NOTIFY_OK;
1774 : : }
1775 : :
1776 : : static struct notifier_block hrtimers_nb = {
1777 : : .notifier_call = hrtimer_cpu_notify,
1778 : : };
1779 : :
1780 : 0 : void __init hrtimers_init(void)
1781 : : {
1782 : 0 : hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
1783 : 0 : (void *)(long)smp_processor_id());
1784 : 0 : register_cpu_notifier(&hrtimers_nb);
1785 : : #ifdef CONFIG_HIGH_RES_TIMERS
1786 : 0 : open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
1787 : : #endif
1788 : 0 : }
1789 : :
1790 : : /**
1791 : : * schedule_hrtimeout_range_clock - sleep until timeout
1792 : : * @expires: timeout value (ktime_t)
1793 : : * @delta: slack in expires timeout (ktime_t)
1794 : : * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1795 : : * @clock: timer clock, CLOCK_MONOTONIC or CLOCK_REALTIME
1796 : : */
1797 : : int __sched
1798 : 0 : schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta,
1799 : : const enum hrtimer_mode mode, int clock)
1800 : : {
1801 : : struct hrtimer_sleeper t;
1802 : :
1803 : : /*
1804 : : * Optimize when a zero timeout value is given. It does not
1805 : : * matter whether this is an absolute or a relative time.
1806 : : */
1807 [ + + ][ - + ]: 54365 : if (expires && !expires->tv64) {
1808 : 0 : __set_current_state(TASK_RUNNING);
1809 : 0 : return 0;
1810 : : }
1811 : :
1812 : : /*
1813 : : * A NULL parameter means "infinite"
1814 : : */
1815 [ + + ]: 54365 : if (!expires) {
1816 : 45139 : schedule();
1817 : 45130 : __set_current_state(TASK_RUNNING);
1818 : 45130 : return -EINTR;
1819 : : }
1820 : :
1821 : : hrtimer_init_on_stack(&t.timer, clock, mode);
1822 : : hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
1823 : :
1824 : 9226 : hrtimer_init_sleeper(&t, current);
1825 : :
1826 : : hrtimer_start_expires(&t.timer, mode);
1827 [ - + ]: 9226 : if (!hrtimer_active(&t.timer))
1828 : 0 : t.task = NULL;
1829 : :
1830 [ + - ]: 9226 : if (likely(t.task))
1831 : 9226 : schedule();
1832 : :
1833 : : hrtimer_cancel(&t.timer);
1834 : : destroy_hrtimer_on_stack(&t.timer);
1835 : :
1836 : 9226 : __set_current_state(TASK_RUNNING);
1837 : :
1838 [ + + ]: 13220 : return !t.task ? 0 : -EINTR;
1839 : : }
1840 : :
1841 : : /**
1842 : : * schedule_hrtimeout_range - sleep until timeout
1843 : : * @expires: timeout value (ktime_t)
1844 : : * @delta: slack in expires timeout (ktime_t)
1845 : : * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1846 : : *
1847 : : * Make the current task sleep until the given expiry time has
1848 : : * elapsed. The routine will return immediately unless
1849 : : * the current task state has been set (see set_current_state()).
1850 : : *
1851 : : * The @delta argument gives the kernel the freedom to schedule the
1852 : : * actual wakeup to a time that is both power and performance friendly.
1853 : : * The kernel give the normal best effort behavior for "@expires+@delta",
1854 : : * but may decide to fire the timer earlier, but no earlier than @expires.
1855 : : *
1856 : : * You can set the task state as follows -
1857 : : *
1858 : : * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1859 : : * pass before the routine returns.
1860 : : *
1861 : : * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1862 : : * delivered to the current task.
1863 : : *
1864 : : * The current task state is guaranteed to be TASK_RUNNING when this
1865 : : * routine returns.
1866 : : *
1867 : : * Returns 0 when the timer has expired otherwise -EINTR
1868 : : */
1869 : 0 : int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
1870 : : const enum hrtimer_mode mode)
1871 : : {
1872 : 54361 : return schedule_hrtimeout_range_clock(expires, delta, mode,
1873 : : CLOCK_MONOTONIC);
1874 : : }
1875 : : EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
1876 : :
1877 : : /**
1878 : : * schedule_hrtimeout - sleep until timeout
1879 : : * @expires: timeout value (ktime_t)
1880 : : * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1881 : : *
1882 : : * Make the current task sleep until the given expiry time has
1883 : : * elapsed. The routine will return immediately unless
1884 : : * the current task state has been set (see set_current_state()).
1885 : : *
1886 : : * You can set the task state as follows -
1887 : : *
1888 : : * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1889 : : * pass before the routine returns.
1890 : : *
1891 : : * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1892 : : * delivered to the current task.
1893 : : *
1894 : : * The current task state is guaranteed to be TASK_RUNNING when this
1895 : : * routine returns.
1896 : : *
1897 : : * Returns 0 when the timer has expired otherwise -EINTR
1898 : : */
1899 : 0 : int __sched schedule_hrtimeout(ktime_t *expires,
1900 : : const enum hrtimer_mode mode)
1901 : : {
1902 : 0 : return schedule_hrtimeout_range(expires, 0, mode);
1903 : : }
1904 : : EXPORT_SYMBOL_GPL(schedule_hrtimeout);
|