Branch data Line data Source code
1 : : /*
2 : : * linux/init/main.c
3 : : *
4 : : * Copyright (C) 1991, 1992 Linus Torvalds
5 : : *
6 : : * GK 2/5/95 - Changed to support mounting root fs via NFS
7 : : * Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
8 : : * Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
9 : : * Simplified starting of init: Michael A. Griffith <grif@acm.org>
10 : : */
11 : :
12 : : #define DEBUG /* Enable initcall_debug */
13 : :
14 : : #include <linux/types.h>
15 : : #include <linux/module.h>
16 : : #include <linux/proc_fs.h>
17 : : #include <linux/kernel.h>
18 : : #include <linux/syscalls.h>
19 : : #include <linux/stackprotector.h>
20 : : #include <linux/string.h>
21 : : #include <linux/ctype.h>
22 : : #include <linux/delay.h>
23 : : #include <linux/ioport.h>
24 : : #include <linux/init.h>
25 : : #include <linux/initrd.h>
26 : : #include <linux/bootmem.h>
27 : : #include <linux/acpi.h>
28 : : #include <linux/tty.h>
29 : : #include <linux/percpu.h>
30 : : #include <linux/kmod.h>
31 : : #include <linux/vmalloc.h>
32 : : #include <linux/kernel_stat.h>
33 : : #include <linux/start_kernel.h>
34 : : #include <linux/security.h>
35 : : #include <linux/smp.h>
36 : : #include <linux/profile.h>
37 : : #include <linux/rcupdate.h>
38 : : #include <linux/moduleparam.h>
39 : : #include <linux/kallsyms.h>
40 : : #include <linux/writeback.h>
41 : : #include <linux/cpu.h>
42 : : #include <linux/cpuset.h>
43 : : #include <linux/cgroup.h>
44 : : #include <linux/efi.h>
45 : : #include <linux/tick.h>
46 : : #include <linux/interrupt.h>
47 : : #include <linux/taskstats_kern.h>
48 : : #include <linux/delayacct.h>
49 : : #include <linux/unistd.h>
50 : : #include <linux/rmap.h>
51 : : #include <linux/mempolicy.h>
52 : : #include <linux/key.h>
53 : : #include <linux/buffer_head.h>
54 : : #include <linux/page_cgroup.h>
55 : : #include <linux/debug_locks.h>
56 : : #include <linux/debugobjects.h>
57 : : #include <linux/lockdep.h>
58 : : #include <linux/kmemleak.h>
59 : : #include <linux/pid_namespace.h>
60 : : #include <linux/device.h>
61 : : #include <linux/kthread.h>
62 : : #include <linux/sched.h>
63 : : #include <linux/signal.h>
64 : : #include <linux/idr.h>
65 : : #include <linux/kgdb.h>
66 : : #include <linux/ftrace.h>
67 : : #include <linux/async.h>
68 : : #include <linux/kmemcheck.h>
69 : : #include <linux/sfi.h>
70 : : #include <linux/shmem_fs.h>
71 : : #include <linux/slab.h>
72 : : #include <linux/perf_event.h>
73 : : #include <linux/file.h>
74 : : #include <linux/ptrace.h>
75 : : #include <linux/blkdev.h>
76 : : #include <linux/elevator.h>
77 : : #include <linux/sched_clock.h>
78 : : #include <linux/context_tracking.h>
79 : : #include <linux/random.h>
80 : :
81 : : #include <asm/io.h>
82 : : #include <asm/bugs.h>
83 : : #include <asm/setup.h>
84 : : #include <asm/sections.h>
85 : : #include <asm/cacheflush.h>
86 : :
87 : : #ifdef CONFIG_X86_LOCAL_APIC
88 : : #include <asm/smp.h>
89 : : #endif
90 : :
91 : : static int kernel_init(void *);
92 : :
93 : : extern void init_IRQ(void);
94 : : extern void fork_init(unsigned long);
95 : : extern void mca_init(void);
96 : : extern void sbus_init(void);
97 : : extern void radix_tree_init(void);
98 : : #ifndef CONFIG_DEBUG_RODATA
99 : : static inline void mark_rodata_ro(void) { }
100 : : #endif
101 : :
102 : : #ifdef CONFIG_TC
103 : : extern void tc_init(void);
104 : : #endif
105 : :
106 : : /*
107 : : * Debug helper: via this flag we know that we are in 'early bootup code'
108 : : * where only the boot processor is running with IRQ disabled. This means
109 : : * two things - IRQ must not be enabled before the flag is cleared and some
110 : : * operations which are not allowed with IRQ disabled are allowed while the
111 : : * flag is set.
112 : : */
113 : : bool early_boot_irqs_disabled __read_mostly;
114 : :
115 : : enum system_states system_state __read_mostly;
116 : : EXPORT_SYMBOL(system_state);
117 : :
118 : : /*
119 : : * Boot command-line arguments
120 : : */
121 : : #define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT
122 : : #define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT
123 : :
124 : : extern void time_init(void);
125 : : /* Default late time init is NULL. archs can override this later. */
126 : : void (*__initdata late_time_init)(void);
127 : :
128 : : /* Untouched command line saved by arch-specific code. */
129 : : char __initdata boot_command_line[COMMAND_LINE_SIZE];
130 : : /* Untouched saved command line (eg. for /proc) */
131 : : char *saved_command_line;
132 : : /* Command line for parameter parsing */
133 : : static char *static_command_line;
134 : : /* Command line for per-initcall parameter parsing */
135 : : static char *initcall_command_line;
136 : :
137 : : static char *execute_command;
138 : : static char *ramdisk_execute_command;
139 : :
140 : : /*
141 : : * Used to generate warnings if static_key manipulation functions are used
142 : : * before jump_label_init is called.
143 : : */
144 : : bool static_key_initialized __read_mostly = false;
145 : : EXPORT_SYMBOL_GPL(static_key_initialized);
146 : :
147 : : /*
148 : : * If set, this is an indication to the drivers that reset the underlying
149 : : * device before going ahead with the initialization otherwise driver might
150 : : * rely on the BIOS and skip the reset operation.
151 : : *
152 : : * This is useful if kernel is booting in an unreliable environment.
153 : : * For ex. kdump situaiton where previous kernel has crashed, BIOS has been
154 : : * skipped and devices will be in unknown state.
155 : : */
156 : : unsigned int reset_devices;
157 : : EXPORT_SYMBOL(reset_devices);
158 : :
159 : 0 : static int __init set_reset_devices(char *str)
160 : : {
161 : 0 : reset_devices = 1;
162 : 0 : return 1;
163 : : }
164 : :
165 : : __setup("reset_devices", set_reset_devices);
166 : :
167 : : static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
168 : : const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
169 : : static const char *panic_later, *panic_param;
170 : :
171 : : extern const struct obs_kernel_param __setup_start[], __setup_end[];
172 : :
173 : 0 : static int __init obsolete_checksetup(char *line)
174 : : {
175 : : const struct obs_kernel_param *p;
176 : : int had_early_param = 0;
177 : :
178 : : p = __setup_start;
179 : : do {
180 : 0 : int n = strlen(p->str);
181 [ # # ]: 0 : if (parameqn(line, p->str, n)) {
182 [ # # ]: 0 : if (p->early) {
183 : : /* Already done in parse_early_param?
184 : : * (Needs exact match on param part).
185 : : * Keep iterating, as we can have early
186 : : * params and __setups of same names 8( */
187 [ # # ]: 0 : if (line[n] == '\0' || line[n] == '=')
188 : : had_early_param = 1;
189 [ # # ]: 0 : } else if (!p->setup_func) {
190 : 0 : pr_warn("Parameter %s is obsolete, ignored\n",
191 : : p->str);
192 : 0 : return 1;
193 [ # # ]: 0 : } else if (p->setup_func(line + n))
194 : : return 1;
195 : : }
196 : 0 : p++;
197 [ # # ]: 0 : } while (p < __setup_end);
198 : :
199 : : return had_early_param;
200 : : }
201 : :
202 : : /*
203 : : * This should be approx 2 Bo*oMips to start (note initial shift), and will
204 : : * still work even if initially too large, it will just take slightly longer
205 : : */
206 : : unsigned long loops_per_jiffy = (1<<12);
207 : :
208 : : EXPORT_SYMBOL(loops_per_jiffy);
209 : :
210 : 0 : static int __init debug_kernel(char *str)
211 : : {
212 : 0 : console_loglevel = 10;
213 : 0 : return 0;
214 : : }
215 : :
216 : 0 : static int __init quiet_kernel(char *str)
217 : : {
218 : 0 : console_loglevel = 4;
219 : 0 : return 0;
220 : : }
221 : :
222 : : early_param("debug", debug_kernel);
223 : : early_param("quiet", quiet_kernel);
224 : :
225 : 0 : static int __init loglevel(char *str)
226 : : {
227 : : int newlevel;
228 : :
229 : : /*
230 : : * Only update loglevel value when a correct setting was passed,
231 : : * to prevent blind crashes (when loglevel being set to 0) that
232 : : * are quite hard to debug
233 : : */
234 [ # # ]: 0 : if (get_option(&str, &newlevel)) {
235 : 0 : console_loglevel = newlevel;
236 : 0 : return 0;
237 : : }
238 : :
239 : : return -EINVAL;
240 : : }
241 : :
242 : : early_param("loglevel", loglevel);
243 : :
244 : : /* Change NUL term back to "=", to make "param" the whole string. */
245 : 0 : static int __init repair_env_string(char *param, char *val, const char *unused)
246 : : {
247 [ # # ]: 0 : if (val) {
248 : : /* param=val or param="val"? */
249 [ # # ]: 0 : if (val == param+strlen(param)+1)
250 : 0 : val[-1] = '=';
251 [ # # ]: 0 : else if (val == param+strlen(param)+2) {
252 : 0 : val[-2] = '=';
253 : 0 : memmove(val-1, val, strlen(val)+1);
254 : : val--;
255 : : } else
256 : 0 : BUG();
257 : : }
258 : 0 : return 0;
259 : : }
260 : :
261 : : /*
262 : : * Unknown boot options get handed to init, unless they look like
263 : : * unused parameters (modprobe will find them in /proc/cmdline).
264 : : */
265 : 0 : static int __init unknown_bootoption(char *param, char *val, const char *unused)
266 : : {
267 : 0 : repair_env_string(param, val, unused);
268 : :
269 : : /* Handle obsolete-style parameters */
270 [ # # ]: 0 : if (obsolete_checksetup(param))
271 : : return 0;
272 : :
273 : : /* Unused module parameter. */
274 [ # # ][ # # ]: 0 : if (strchr(param, '.') && (!val || strchr(param, '.') < val))
[ # # ]
275 : : return 0;
276 : :
277 [ # # ]: 0 : if (panic_later)
278 : : return 0;
279 : :
280 [ # # ]: 0 : if (val) {
281 : : /* Environment option */
282 : : unsigned int i;
283 [ # # ]: 0 : for (i = 0; envp_init[i]; i++) {
284 [ # # ]: 0 : if (i == MAX_INIT_ENVS) {
285 : 0 : panic_later = "Too many boot env vars at `%s'";
286 : 0 : panic_param = param;
287 : : }
288 [ # # ]: 0 : if (!strncmp(param, envp_init[i], val - param))
289 : : break;
290 : : }
291 : 0 : envp_init[i] = param;
292 : : } else {
293 : : /* Command line option */
294 : : unsigned int i;
295 [ # # ]: 0 : for (i = 0; argv_init[i]; i++) {
296 [ # # ]: 0 : if (i == MAX_INIT_ARGS) {
297 : 0 : panic_later = "Too many boot init vars at `%s'";
298 : 0 : panic_param = param;
299 : : }
300 : : }
301 : 0 : argv_init[i] = param;
302 : : }
303 : : return 0;
304 : : }
305 : :
306 : 0 : static int __init init_setup(char *str)
307 : : {
308 : : unsigned int i;
309 : :
310 : 0 : execute_command = str;
311 : : /*
312 : : * In case LILO is going to boot us with default command line,
313 : : * it prepends "auto" before the whole cmdline which makes
314 : : * the shell think it should execute a script with such name.
315 : : * So we ignore all arguments entered _before_ init=... [MJ]
316 : : */
317 [ # # ]: 0 : for (i = 1; i < MAX_INIT_ARGS; i++)
318 : 0 : argv_init[i] = NULL;
319 : 0 : return 1;
320 : : }
321 : : __setup("init=", init_setup);
322 : :
323 : 0 : static int __init rdinit_setup(char *str)
324 : : {
325 : : unsigned int i;
326 : :
327 : 0 : ramdisk_execute_command = str;
328 : : /* See "auto" comment in init_setup */
329 [ # # ]: 0 : for (i = 1; i < MAX_INIT_ARGS; i++)
330 : 0 : argv_init[i] = NULL;
331 : 0 : return 1;
332 : : }
333 : : __setup("rdinit=", rdinit_setup);
334 : :
335 : : #ifndef CONFIG_SMP
336 : : static const unsigned int setup_max_cpus = NR_CPUS;
337 : : #ifdef CONFIG_X86_LOCAL_APIC
338 : : static void __init smp_init(void)
339 : : {
340 : : APIC_init_uniprocessor();
341 : : }
342 : : #else
343 : : #define smp_init() do { } while (0)
344 : : #endif
345 : :
346 : : static inline void setup_nr_cpu_ids(void) { }
347 : : static inline void smp_prepare_cpus(unsigned int maxcpus) { }
348 : : #endif
349 : :
350 : : /*
351 : : * We need to store the untouched command line for future reference.
352 : : * We also need to store the touched command line since the parameter
353 : : * parsing is performed in place, and we should allow a component to
354 : : * store reference of name/value for future reference.
355 : : */
356 : 0 : static void __init setup_command_line(char *command_line)
357 : : {
358 : 0 : saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
359 : 0 : initcall_command_line = alloc_bootmem(strlen (boot_command_line)+1);
360 : 0 : static_command_line = alloc_bootmem(strlen (command_line)+1);
361 : 0 : strcpy (saved_command_line, boot_command_line);
362 : 0 : strcpy (static_command_line, command_line);
363 : 0 : }
364 : :
365 : : /*
366 : : * We need to finalize in a non-__init function or else race conditions
367 : : * between the root thread and the init thread may cause start_kernel to
368 : : * be reaped by free_initmem before the root thread has proceeded to
369 : : * cpu_idle.
370 : : *
371 : : * gcc-3.4 accidentally inlines this function, so use noinline.
372 : : */
373 : :
374 : : static __initdata DECLARE_COMPLETION(kthreadd_done);
375 : :
376 : 0 : static noinline void __init_refok rest_init(void)
377 : : {
378 : : int pid;
379 : :
380 : 0 : rcu_scheduler_starting();
381 : : /*
382 : : * We need to spawn init first so that it obtains pid 1, however
383 : : * the init task will end up wanting to create kthreads, which, if
384 : : * we schedule it before we create kthreadd, will OOPS.
385 : : */
386 : 0 : kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
387 : : numa_default_policy();
388 : 0 : pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
389 : : rcu_read_lock();
390 : 0 : kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
391 : : rcu_read_unlock();
392 : 0 : complete(&kthreadd_done);
393 : :
394 : : /*
395 : : * The boot idle thread must execute schedule()
396 : : * at least once to get things moving:
397 : : */
398 : 0 : init_idle_bootup_task(current);
399 : 0 : schedule_preempt_disabled();
400 : : /* Call into cpu_idle with preempt disabled */
401 : 0 : cpu_startup_entry(CPUHP_ONLINE);
402 : 0 : }
403 : :
404 : : /* Check for early params. */
405 : 0 : static int __init do_early_param(char *param, char *val, const char *unused)
406 : : {
407 : : const struct obs_kernel_param *p;
408 : :
409 [ # # ]: 0 : for (p = __setup_start; p < __setup_end; p++) {
410 [ # # ][ # # ]: 0 : if ((p->early && parameq(param, p->str)) ||
[ # # ]
411 [ # # ]: 0 : (strcmp(param, "console") == 0 &&
412 : 0 : strcmp(p->str, "earlycon") == 0)
413 : : ) {
414 [ # # ]: 0 : if (p->setup_func(val) != 0)
415 : 0 : pr_warn("Malformed early option '%s'\n", param);
416 : : }
417 : : }
418 : : /* We accept everything at this stage. */
419 : 0 : return 0;
420 : : }
421 : :
422 : 0 : void __init parse_early_options(char *cmdline)
423 : : {
424 : 0 : parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param);
425 : 0 : }
426 : :
427 : : /* Arch code calls this early on, or if not, just before other parsing. */
428 : 0 : void __init parse_early_param(void)
429 : : {
430 : : static __initdata int done = 0;
431 : : static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
432 : :
433 [ # # ]: 0 : if (done)
434 : 0 : return;
435 : :
436 : : /* All fall through to do_early_param. */
437 : 0 : strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
438 : 0 : parse_early_options(tmp_cmdline);
439 : 0 : done = 1;
440 : : }
441 : :
442 : : /*
443 : : * Activate the first processor.
444 : : */
445 : :
446 : 0 : static void __init boot_cpu_init(void)
447 : : {
448 : 0 : int cpu = smp_processor_id();
449 : : /* Mark the boot cpu "present", "online" etc for SMP and UP case */
450 : 0 : set_cpu_online(cpu, true);
451 : 0 : set_cpu_active(cpu, true);
452 : 0 : set_cpu_present(cpu, true);
453 : 0 : set_cpu_possible(cpu, true);
454 : 0 : }
455 : :
456 : 0 : void __init __weak smp_setup_processor_id(void)
457 : : {
458 : 0 : }
459 : :
460 : : # if THREAD_SIZE >= PAGE_SIZE
461 : 0 : void __init __weak thread_info_cache_init(void)
462 : : {
463 : 0 : }
464 : : #endif
465 : :
466 : : /*
467 : : * Set up kernel memory allocators
468 : : */
469 : 0 : static void __init mm_init(void)
470 : : {
471 : : /*
472 : : * page_cgroup requires contiguous pages,
473 : : * bigger than MAX_ORDER unless SPARSEMEM.
474 : : */
475 : : page_cgroup_init_flatmem();
476 : 0 : mem_init();
477 : 0 : kmem_cache_init();
478 : 0 : percpu_init_late();
479 : : pgtable_cache_init();
480 : 0 : vmalloc_init();
481 : 0 : }
482 : :
483 : 0 : asmlinkage void __init start_kernel(void)
484 : : {
485 : : char * command_line;
486 : : extern const struct kernel_param __start___param[], __stop___param[];
487 : :
488 : : /*
489 : : * Need to run as early as possible, to initialize the
490 : : * lockdep hash:
491 : : */
492 : : lockdep_init();
493 : 0 : smp_setup_processor_id();
494 : : debug_objects_early_init();
495 : :
496 : : /*
497 : : * Set up the the initial canary ASAP:
498 : : */
499 : : boot_init_stack_canary();
500 : :
501 : 0 : cgroup_init_early();
502 : :
503 : : local_irq_disable();
504 : 0 : early_boot_irqs_disabled = true;
505 : :
506 : : /*
507 : : * Interrupts are still disabled. Do necessary setups, then
508 : : * enable them
509 : : */
510 : 0 : boot_cpu_init();
511 : 0 : page_address_init();
512 : 0 : pr_notice("%s", linux_banner);
513 : 0 : pr_notice("%s", linux_scm_version_banner);
514 : 0 : setup_arch(&command_line);
515 : : mm_init_owner(&init_mm, &init_task);
516 : : mm_init_cpumask(&init_mm);
517 : 0 : setup_command_line(command_line);
518 : 0 : setup_nr_cpu_ids();
519 : 0 : setup_per_cpu_areas();
520 : 0 : smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
521 : :
522 : 0 : build_all_zonelists(NULL, NULL);
523 : 0 : page_alloc_init();
524 : :
525 : 0 : pr_notice("Kernel command line: %s\n", boot_command_line);
526 : 0 : parse_early_param();
527 : 0 : parse_args("Booting kernel", static_command_line, __start___param,
528 : 0 : __stop___param - __start___param,
529 : : -1, -1, &unknown_bootoption);
530 : :
531 : : jump_label_init();
532 : :
533 : : /*
534 : : * These use large bootmem allocations and must precede
535 : : * kmem_cache_init()
536 : : */
537 : 0 : setup_log_buf(0);
538 : 0 : pidhash_init();
539 : 0 : vfs_caches_init_early();
540 : 0 : sort_main_extable();
541 : 0 : trap_init();
542 : 0 : mm_init();
543 : :
544 : : /*
545 : : * Set up the scheduler prior starting any interrupts (such as the
546 : : * timer interrupt). Full topology setup happens at smp_init()
547 : : * time - but meanwhile we still have a functioning scheduler.
548 : : */
549 : 0 : sched_init();
550 : : /*
551 : : * Disable preemption - early bootup scheduling is extremely
552 : : * fragile until we cpu_idle() for the first time.
553 : : */
554 : 0 : preempt_disable();
555 [ # # ][ # # ]: 0 : if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n"))
556 : : local_irq_disable();
557 : 0 : idr_init_cache();
558 : 0 : rcu_init();
559 : : tick_nohz_init();
560 : : context_tracking_init();
561 : 0 : radix_tree_init();
562 : : /* init some links before init_ISA_irqs() */
563 : 0 : early_irq_init();
564 : 0 : init_IRQ();
565 : 0 : tick_init();
566 : 0 : init_timers();
567 : 0 : hrtimers_init();
568 : 0 : softirq_init();
569 : 0 : timekeeping_init();
570 : 0 : time_init();
571 : 0 : sched_clock_postinit();
572 : 0 : perf_event_init();
573 : 0 : profile_init();
574 : 0 : call_function_init();
575 [ # # ]: 0 : WARN(!irqs_disabled(), "Interrupts were enabled early\n");
576 : 0 : early_boot_irqs_disabled = false;
577 : : local_irq_enable();
578 : :
579 : 0 : kmem_cache_init_late();
580 : :
581 : : /*
582 : : * HACK ALERT! This is early. We're enabling the console before
583 : : * we've done PCI setups etc, and console_init() must be aware of
584 : : * this. But we do want output early, in case something goes wrong.
585 : : */
586 : 0 : console_init();
587 [ # # ]: 0 : if (panic_later)
588 : 0 : panic(panic_later, panic_param);
589 : :
590 : : lockdep_info();
591 : :
592 : : /*
593 : : * Need to run this when irqs are enabled, because it wants
594 : : * to self-test [hard/soft]-irqs on/off lock inversion bugs
595 : : * too:
596 : : */
597 : : locking_selftest();
598 : :
599 : : #ifdef CONFIG_BLK_DEV_INITRD
600 [ # # ][ # # ]: 0 : if (initrd_start && !initrd_below_start_ok &&
[ # # ]
601 : 0 : page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
602 : 0 : pr_crit("initrd overwritten (0x%08lx < 0x%08lx) - disabling it.\n",
603 : : page_to_pfn(virt_to_page((void *)initrd_start)),
604 : : min_low_pfn);
605 : 0 : initrd_start = 0;
606 : : }
607 : : #endif
608 : : page_cgroup_init();
609 : : debug_objects_mem_init();
610 : : kmemleak_init();
611 : 0 : setup_per_cpu_pageset();
612 : : numa_policy_init();
613 [ # # ]: 0 : if (late_time_init)
614 : 0 : late_time_init();
615 : 0 : sched_clock_init();
616 : 0 : calibrate_delay();
617 : 0 : pidmap_init();
618 : 0 : anon_vma_init();
619 : : #ifdef CONFIG_X86
620 : : if (efi_enabled(EFI_RUNTIME_SERVICES))
621 : : efi_enter_virtual_mode();
622 : : #endif
623 : 0 : thread_info_cache_init();
624 : 0 : cred_init();
625 : 0 : fork_init(totalram_pages);
626 : 0 : proc_caches_init();
627 : 0 : buffer_init();
628 : 0 : key_init();
629 : 0 : security_init();
630 : : dbg_late_init();
631 : 0 : vfs_caches_init(totalram_pages);
632 : 0 : signals_init();
633 : : /* rootfs populating might need page-writeback */
634 : 0 : page_writeback_init();
635 : : #ifdef CONFIG_PROC_FS
636 : 0 : proc_root_init();
637 : : #endif
638 : 0 : cgroup_init();
639 : : cpuset_init();
640 : : taskstats_init_early();
641 : : delayacct_init();
642 : :
643 : 0 : check_bugs();
644 : :
645 : : acpi_early_init(); /* before LAPIC and SMP init */
646 : : sfi_init_late();
647 : :
648 : : if (efi_enabled(EFI_RUNTIME_SERVICES)) {
649 : : efi_late_init();
650 : : efi_free_boot_services();
651 : : }
652 : :
653 : 0 : ftrace_init();
654 : :
655 : : /* Do the rest non-__init'ed, we're now alive */
656 : 0 : rest_init();
657 : 0 : }
658 : :
659 : : /* Call all constructor functions linked into the kernel. */
660 : 0 : static void __init do_ctors(void)
661 : : {
662 : : #ifdef CONFIG_CONSTRUCTORS
663 : : ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
664 : :
665 [ # # ]: 0 : for (; fn < (ctor_fn_t *) __ctors_end; fn++)
666 : 0 : (*fn)();
667 : : #endif
668 : 0 : }
669 : :
670 : : bool initcall_debug;
671 : : core_param(initcall_debug, initcall_debug, bool, 0644);
672 : :
673 : 0 : static int __init_or_module do_one_initcall_debug(initcall_t fn)
674 : : {
675 : : ktime_t calltime, delta, rettime;
676 : : unsigned long long duration;
677 : : int ret;
678 : :
679 : 0 : pr_debug("calling %pF @ %i\n", fn, task_pid_nr(current));
680 : 0 : calltime = ktime_get();
681 : 0 : ret = fn();
682 : 0 : rettime = ktime_get();
683 : 0 : delta = ktime_sub(rettime, calltime);
684 : 0 : duration = (unsigned long long) ktime_to_ns(delta) >> 10;
685 : 0 : pr_debug("initcall %pF returned %d after %lld usecs\n",
686 : : fn, ret, duration);
687 : :
688 : 0 : return ret;
689 : : }
690 : :
691 : 0 : int __init_or_module do_one_initcall(initcall_t fn)
692 : : {
693 : : int count = preempt_count();
694 : : int ret;
695 : : char msgbuf[64];
696 : :
697 [ # # ]: 0 : if (initcall_debug)
698 : 0 : ret = do_one_initcall_debug(fn);
699 : : else
700 : 0 : ret = fn();
701 : :
702 : 0 : msgbuf[0] = 0;
703 : :
704 [ # # ]: 0 : if (preempt_count() != count) {
705 : 0 : sprintf(msgbuf, "preemption imbalance ");
706 : : preempt_count_set(count);
707 : : }
708 [ # # ]: 0 : if (irqs_disabled()) {
709 : 0 : strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
710 : : local_irq_enable();
711 : : }
712 [ # # ]: 0 : WARN(msgbuf[0], "initcall %pF returned with %s\n", fn, msgbuf);
713 : :
714 : 0 : return ret;
715 : : }
716 : :
717 : :
718 : : extern initcall_t __initcall_start[];
719 : : extern initcall_t __initcall0_start[];
720 : : extern initcall_t __initcall1_start[];
721 : : extern initcall_t __initcall2_start[];
722 : : extern initcall_t __initcall3_start[];
723 : : extern initcall_t __initcall4_start[];
724 : : extern initcall_t __initcall5_start[];
725 : : extern initcall_t __initcall6_start[];
726 : : extern initcall_t __initcall7_start[];
727 : : extern initcall_t __initcall_end[];
728 : :
729 : : static initcall_t *initcall_levels[] __initdata = {
730 : : __initcall0_start,
731 : : __initcall1_start,
732 : : __initcall2_start,
733 : : __initcall3_start,
734 : : __initcall4_start,
735 : : __initcall5_start,
736 : : __initcall6_start,
737 : : __initcall7_start,
738 : : __initcall_end,
739 : : };
740 : :
741 : : /* Keep these in sync with initcalls in include/linux/init.h */
742 : : static char *initcall_level_names[] __initdata = {
743 : : "early",
744 : : "core",
745 : : "postcore",
746 : : "arch",
747 : : "subsys",
748 : : "fs",
749 : : "device",
750 : : "late",
751 : : };
752 : :
753 : 0 : static void __init do_initcall_level(int level)
754 : : {
755 : : extern const struct kernel_param __start___param[], __stop___param[];
756 : : initcall_t *fn;
757 : :
758 : 0 : strcpy(initcall_command_line, saved_command_line);
759 : 0 : parse_args(initcall_level_names[level],
760 : : initcall_command_line, __start___param,
761 : 0 : __stop___param - __start___param,
762 : : level, level,
763 : : &repair_env_string);
764 : :
765 [ # # ]: 0 : for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++)
766 : 0 : do_one_initcall(*fn);
767 : 0 : }
768 : :
769 : 0 : static void __init do_initcalls(void)
770 : : {
771 : : int level;
772 : :
773 [ # # ]: 0 : for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++)
774 : 0 : do_initcall_level(level);
775 : 0 : }
776 : :
777 : : /*
778 : : * Ok, the machine is now initialized. None of the devices
779 : : * have been touched yet, but the CPU subsystem is up and
780 : : * running, and memory and process management works.
781 : : *
782 : : * Now we can finally start doing some real work..
783 : : */
784 : 0 : static void __init do_basic_setup(void)
785 : : {
786 : : cpuset_init_smp();
787 : 0 : usermodehelper_init();
788 : 0 : shmem_init();
789 : 0 : driver_init();
790 : 0 : init_irq_proc();
791 : 0 : do_ctors();
792 : : usermodehelper_enable();
793 : 0 : do_initcalls();
794 : 0 : random_int_secret_init();
795 : 0 : }
796 : :
797 : 0 : static void __init do_pre_smp_initcalls(void)
798 : : {
799 : : initcall_t *fn;
800 : :
801 [ # # ]: 0 : for (fn = __initcall_start; fn < __initcall0_start; fn++)
802 : 0 : do_one_initcall(*fn);
803 : 0 : }
804 : :
805 : : /*
806 : : * This function requests modules which should be loaded by default and is
807 : : * called twice right after initrd is mounted and right before init is
808 : : * exec'd. If such modules are on either initrd or rootfs, they will be
809 : : * loaded before control is passed to userland.
810 : : */
811 : 0 : void __init load_default_modules(void)
812 : : {
813 : 0 : load_default_elevator_module();
814 : 0 : }
815 : :
816 : : static int run_init_process(const char *init_filename)
817 : : {
818 : 0 : argv_init[0] = init_filename;
819 : 0 : return do_execve(init_filename,
820 : : (const char __user *const __user *)argv_init,
821 : : (const char __user *const __user *)envp_init);
822 : : }
823 : :
824 : 0 : static int try_to_run_init_process(const char *init_filename)
825 : : {
826 : : int ret;
827 : :
828 : : ret = run_init_process(init_filename);
829 : :
830 [ # # ]: 0 : if (ret && ret != -ENOENT) {
831 : 0 : pr_err("Starting init: %s exists but couldn't execute it (error %d)\n",
832 : : init_filename, ret);
833 : : }
834 : :
835 : 0 : return ret;
836 : : }
837 : :
838 : : static noinline void __init kernel_init_freeable(void);
839 : :
840 : 0 : static int __ref kernel_init(void *unused)
841 : : {
842 : : int ret;
843 : :
844 : 0 : kernel_init_freeable();
845 : : /* need to finish all async __init code before freeing the memory */
846 : 0 : async_synchronize_full();
847 : 0 : free_initmem();
848 : : mark_rodata_ro();
849 : 0 : system_state = SYSTEM_RUNNING;
850 : : numa_default_policy();
851 : :
852 : 0 : flush_delayed_fput();
853 : :
854 [ # # ]: 0 : if (ramdisk_execute_command) {
855 : : ret = run_init_process(ramdisk_execute_command);
856 [ # # ]: 0 : if (!ret)
857 : : return 0;
858 : 0 : pr_err("Failed to execute %s (error %d)\n",
859 : : ramdisk_execute_command, ret);
860 : : }
861 : :
862 : : /*
863 : : * We try each of these until one succeeds.
864 : : *
865 : : * The Bourne shell can be used instead of init if we are
866 : : * trying to recover a really broken machine.
867 : : */
868 [ # # ]: 0 : if (execute_command) {
869 : : ret = run_init_process(execute_command);
870 [ # # ]: 0 : if (!ret)
871 : : return 0;
872 : 0 : pr_err("Failed to execute %s (error %d). Attempting defaults...\n",
873 : : execute_command, ret);
874 : : }
875 [ # # # # ]: 0 : if (!try_to_run_init_process("/sbin/init") ||
876 [ # # ]: 0 : !try_to_run_init_process("/etc/init") ||
877 [ # # ]: 0 : !try_to_run_init_process("/bin/init") ||
878 : 0 : !try_to_run_init_process("/bin/sh"))
879 : : return 0;
880 : :
881 : 0 : panic("No working init found. Try passing init= option to kernel. "
882 : : "See Linux Documentation/init.txt for guidance.");
883 : : }
884 : :
885 : 0 : static noinline void __init kernel_init_freeable(void)
886 : : {
887 : : /*
888 : : * Wait until kthreadd is all set-up.
889 : : */
890 : 0 : wait_for_completion(&kthreadd_done);
891 : :
892 : : /* Now the scheduler is fully set up and can do blocking allocations */
893 : 0 : gfp_allowed_mask = __GFP_BITS_MASK;
894 : :
895 : : /*
896 : : * init can allocate pages on any node
897 : : */
898 : : set_mems_allowed(node_states[N_MEMORY]);
899 : : /*
900 : : * init can run on any cpu.
901 : : */
902 : 0 : set_cpus_allowed_ptr(current, cpu_all_mask);
903 : :
904 : 0 : cad_pid = task_pid(current);
905 : :
906 : 0 : smp_prepare_cpus(setup_max_cpus);
907 : :
908 : 0 : do_pre_smp_initcalls();
909 : : lockup_detector_init();
910 : :
911 : 0 : smp_init();
912 : 0 : sched_init_smp();
913 : :
914 : 0 : do_basic_setup();
915 : :
916 : : /* Open the /dev/console on the rootfs, this should never fail */
917 [ # # ]: 0 : if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
918 : 0 : pr_err("Warning: unable to open an initial console.\n");
919 : :
920 : 0 : (void) sys_dup(0);
921 : 0 : (void) sys_dup(0);
922 : : /*
923 : : * check if there is an early userspace init. If yes, let it do all
924 : : * the work
925 : : */
926 : :
927 [ # # ]: 0 : if (!ramdisk_execute_command)
928 : 0 : ramdisk_execute_command = "/init";
929 : :
930 [ # # ]: 0 : if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
931 : 0 : ramdisk_execute_command = NULL;
932 : 0 : prepare_namespace();
933 : : }
934 : :
935 : : /*
936 : : * Ok, we have completed the initial bootup, and
937 : : * we're essentially up and running. Get rid of the
938 : : * initmem segments and start the user-mode stuff..
939 : : */
940 : :
941 : : /* rootfs is available now, try loading default modules */
942 : : load_default_modules();
943 : 0 : }
|