Branch data Line data Source code
1 : : /*
2 : : * net busy poll support
3 : : * Copyright(c) 2013 Intel Corporation.
4 : : *
5 : : * This program is free software; you can redistribute it and/or modify it
6 : : * under the terms and conditions of the GNU General Public License,
7 : : * version 2, as published by the Free Software Foundation.
8 : : *
9 : : * This program is distributed in the hope it will be useful, but WITHOUT
10 : : * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 : : * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 : : * more details.
13 : : *
14 : : * You should have received a copy of the GNU General Public License along with
15 : : * this program; if not, write to the Free Software Foundation, Inc.,
16 : : * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17 : : *
18 : : * Author: Eliezer Tamir
19 : : *
20 : : * Contact Information:
21 : : * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
22 : : */
23 : :
24 : : #ifndef _LINUX_NET_BUSY_POLL_H
25 : : #define _LINUX_NET_BUSY_POLL_H
26 : :
27 : : #include <linux/netdevice.h>
28 : : #include <net/ip.h>
29 : :
30 : : #ifdef CONFIG_NET_RX_BUSY_POLL
31 : :
32 : : struct napi_struct;
33 : : extern unsigned int sysctl_net_busy_read __read_mostly;
34 : : extern unsigned int sysctl_net_busy_poll __read_mostly;
35 : :
36 : : /* return values from ndo_ll_poll */
37 : : #define LL_FLUSH_FAILED -1
38 : : #define LL_FLUSH_BUSY -2
39 : :
40 : : static inline bool net_busy_loop_on(void)
41 : : {
42 : 115513 : return sysctl_net_busy_poll;
43 : : }
44 : :
45 : : /* a wrapper to make debug_smp_processor_id() happy
46 : : * we can use sched_clock() because we don't care much about precision
47 : : * we only care that the average is bounded
48 : : */
49 : : #ifdef CONFIG_DEBUG_PREEMPT
50 : : static inline u64 busy_loop_us_clock(void)
51 : : {
52 : : u64 rc;
53 : :
54 : : preempt_disable_notrace();
55 : : rc = sched_clock();
56 : : preempt_enable_no_resched_notrace();
57 : :
58 : : return rc >> 10;
59 : : }
60 : : #else /* CONFIG_DEBUG_PREEMPT */
61 : : static inline u64 busy_loop_us_clock(void)
62 : : {
63 : 0 : return sched_clock() >> 10;
64 : : }
65 : : #endif /* CONFIG_DEBUG_PREEMPT */
66 : :
67 : : static inline unsigned long sk_busy_loop_end_time(struct sock *sk)
68 : : {
69 : 0 : return busy_loop_us_clock() + ACCESS_ONCE(sk->sk_ll_usec);
70 : : }
71 : :
72 : : /* in poll/select we use the global sysctl_net_ll_poll value */
73 : : static inline unsigned long busy_loop_end_time(void)
74 : : {
75 : 0 : return busy_loop_us_clock() + ACCESS_ONCE(sysctl_net_busy_poll);
76 : : }
77 : :
78 : : static inline bool sk_can_busy_loop(struct sock *sk)
79 : : {
80 [ # # ][ # # ]: 0 : return sk->sk_ll_usec && sk->sk_napi_id &&
81 [ - + ][ # # ]: 305030 : !need_resched() && !signal_pending(current);
[ - + ][ # # ]
82 : : }
83 : :
84 : :
85 : : static inline bool busy_loop_timeout(unsigned long end_time)
86 : : {
87 : 0 : unsigned long now = busy_loop_us_clock();
88 : :
89 [ # # ][ # # ]: 0 : return time_after(now, end_time);
90 : : }
91 : :
92 : : /* when used in sock_poll() nonblock is known at compile time to be true
93 : : * so the loop and end_time will be optimized out
94 : : */
95 : : static inline bool sk_busy_loop(struct sock *sk, int nonblock)
96 : : {
97 [ # # ]: 0 : unsigned long end_time = !nonblock ? sk_busy_loop_end_time(sk) : 0;
98 : : const struct net_device_ops *ops;
99 : : struct napi_struct *napi;
100 : : int rc = false;
101 : :
102 : : /*
103 : : * rcu read lock for napi hash
104 : : * bh so we don't race with net_rx_action
105 : : */
106 : : rcu_read_lock_bh();
107 : :
108 : 0 : napi = napi_by_id(sk->sk_napi_id);
109 [ # # ]: 0 : if (!napi)
110 : : goto out;
111 : :
112 : 0 : ops = napi->dev->netdev_ops;
113 [ # # ]: 0 : if (!ops->ndo_busy_poll)
114 : : goto out;
115 : :
116 : : do {
117 : 0 : rc = ops->ndo_busy_poll(napi);
118 : :
119 [ # # ]: 0 : if (rc == LL_FLUSH_FAILED)
120 : : break; /* permanent failure */
121 : :
122 [ # # ]: 0 : if (rc > 0)
123 : : /* local bh are disabled so it is ok to use _BH */
124 : 0 : NET_ADD_STATS_BH(sock_net(sk),
125 : : LINUX_MIB_BUSYPOLLRXPACKETS, rc);
126 : 0 : cpu_relax();
127 : :
128 [ # # ][ # # ]: 0 : } while (!nonblock && skb_queue_empty(&sk->sk_receive_queue) &&
129 [ # # ][ # # ]: 0 : !need_resched() && !busy_loop_timeout(end_time));
130 : :
131 : 0 : rc = !skb_queue_empty(&sk->sk_receive_queue);
132 : : out:
133 : : rcu_read_unlock_bh();
134 : : return rc;
135 : : }
136 : :
137 : : /* used in the NIC receive handler to mark the skb */
138 : : static inline void skb_mark_napi_id(struct sk_buff *skb,
139 : : struct napi_struct *napi)
140 : : {
141 : : skb->napi_id = napi->napi_id;
142 : : }
143 : :
144 : : /* used in the protocol hanlder to propagate the napi_id to the socket */
145 : : static inline void sk_mark_napi_id(struct sock *sk, struct sk_buff *skb)
146 : : {
147 : 59929 : sk->sk_napi_id = skb->napi_id;
148 : : }
149 : :
150 : : #else /* CONFIG_NET_RX_BUSY_POLL */
151 : : static inline unsigned long net_busy_loop_on(void)
152 : : {
153 : : return 0;
154 : : }
155 : :
156 : : static inline unsigned long busy_loop_end_time(void)
157 : : {
158 : : return 0;
159 : : }
160 : :
161 : : static inline bool sk_can_busy_loop(struct sock *sk)
162 : : {
163 : : return false;
164 : : }
165 : :
166 : : static inline void skb_mark_napi_id(struct sk_buff *skb,
167 : : struct napi_struct *napi)
168 : : {
169 : : }
170 : :
171 : : static inline void sk_mark_napi_id(struct sock *sk, struct sk_buff *skb)
172 : : {
173 : : }
174 : :
175 : : static inline bool busy_loop_timeout(unsigned long end_time)
176 : : {
177 : : return true;
178 : : }
179 : :
180 : : static inline bool sk_busy_loop(struct sock *sk, int nonblock)
181 : : {
182 : : return false;
183 : : }
184 : :
185 : : #endif /* CONFIG_NET_RX_BUSY_POLL */
186 : : #endif /* _LINUX_NET_BUSY_POLL_H */
|