Branch data Line data Source code
1 : : /*
2 : : * ethtool.h: Defines for Linux ethtool.
3 : : *
4 : : * Copyright (C) 1998 David S. Miller (davem@redhat.com)
5 : : * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
6 : : * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
7 : : * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
8 : : * christopher.leech@intel.com,
9 : : * scott.feldman@intel.com)
10 : : * Portions Copyright (C) Sun Microsystems 2008
11 : : */
12 : : #ifndef _LINUX_ETHTOOL_H
13 : : #define _LINUX_ETHTOOL_H
14 : :
15 : : #include <linux/compat.h>
16 : : #include <uapi/linux/ethtool.h>
17 : :
18 : : #ifdef CONFIG_COMPAT
19 : :
20 : : struct compat_ethtool_rx_flow_spec {
21 : : u32 flow_type;
22 : : union ethtool_flow_union h_u;
23 : : struct ethtool_flow_ext h_ext;
24 : : union ethtool_flow_union m_u;
25 : : struct ethtool_flow_ext m_ext;
26 : : compat_u64 ring_cookie;
27 : : u32 location;
28 : : };
29 : :
30 : : struct compat_ethtool_rxnfc {
31 : : u32 cmd;
32 : : u32 flow_type;
33 : : compat_u64 data;
34 : : struct compat_ethtool_rx_flow_spec fs;
35 : : u32 rule_cnt;
36 : : u32 rule_locs[0];
37 : : };
38 : :
39 : : #endif /* CONFIG_COMPAT */
40 : :
41 : : #include <linux/rculist.h>
42 : :
43 : : extern int __ethtool_get_settings(struct net_device *dev,
44 : : struct ethtool_cmd *cmd);
45 : :
46 : : /**
47 : : * enum ethtool_phys_id_state - indicator state for physical identification
48 : : * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
49 : : * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
50 : : * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
51 : : * is not supported)
52 : : * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
53 : : * is not supported)
54 : : */
55 : : enum ethtool_phys_id_state {
56 : : ETHTOOL_ID_INACTIVE,
57 : : ETHTOOL_ID_ACTIVE,
58 : : ETHTOOL_ID_ON,
59 : : ETHTOOL_ID_OFF
60 : : };
61 : :
62 : : struct net_device;
63 : :
64 : : /* Some generic methods drivers may use in their ethtool_ops */
65 : : u32 ethtool_op_get_link(struct net_device *dev);
66 : : int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
67 : :
68 : : /**
69 : : * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
70 : : * @index: Index in RX flow hash indirection table
71 : : * @n_rx_rings: Number of RX rings to use
72 : : *
73 : : * This function provides the default policy for RX flow hash indirection.
74 : : */
75 : : static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
76 : : {
77 : 0 : return index % n_rx_rings;
78 : : }
79 : :
80 : : /**
81 : : * struct ethtool_ops - optional netdev operations
82 : : * @get_settings: Get various device settings including Ethernet link
83 : : * settings. The @cmd parameter is expected to have been cleared
84 : : * before get_settings is called. Returns a negative error code or
85 : : * zero.
86 : : * @set_settings: Set various device settings including Ethernet link
87 : : * settings. Returns a negative error code or zero.
88 : : * @get_drvinfo: Report driver/device information. Should only set the
89 : : * @driver, @version, @fw_version and @bus_info fields. If not
90 : : * implemented, the @driver and @bus_info fields will be filled in
91 : : * according to the netdev's parent device.
92 : : * @get_regs_len: Get buffer length required for @get_regs
93 : : * @get_regs: Get device registers
94 : : * @get_wol: Report whether Wake-on-Lan is enabled
95 : : * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code
96 : : * or zero.
97 : : * @get_msglevel: Report driver message level. This should be the value
98 : : * of the @msg_enable field used by netif logging functions.
99 : : * @set_msglevel: Set driver message level
100 : : * @nway_reset: Restart autonegotiation. Returns a negative error code
101 : : * or zero.
102 : : * @get_link: Report whether physical link is up. Will only be called if
103 : : * the netdev is up. Should usually be set to ethtool_op_get_link(),
104 : : * which uses netif_carrier_ok().
105 : : * @get_eeprom: Read data from the device EEPROM.
106 : : * Should fill in the magic field. Don't need to check len for zero
107 : : * or wraparound. Fill in the data argument with the eeprom values
108 : : * from offset to offset + len. Update len to the amount read.
109 : : * Returns an error or zero.
110 : : * @set_eeprom: Write data to the device EEPROM.
111 : : * Should validate the magic field. Don't need to check len for zero
112 : : * or wraparound. Update len to the amount written. Returns an error
113 : : * or zero.
114 : : * @get_coalesce: Get interrupt coalescing parameters. Returns a negative
115 : : * error code or zero.
116 : : * @set_coalesce: Set interrupt coalescing parameters. Returns a negative
117 : : * error code or zero.
118 : : * @get_ringparam: Report ring sizes
119 : : * @set_ringparam: Set ring sizes. Returns a negative error code or zero.
120 : : * @get_pauseparam: Report pause parameters
121 : : * @set_pauseparam: Set pause parameters. Returns a negative error code
122 : : * or zero.
123 : : * @self_test: Run specified self-tests
124 : : * @get_strings: Return a set of strings that describe the requested objects
125 : : * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
126 : : * attached to it. The implementation may update the indicator
127 : : * asynchronously or synchronously, but in either case it must return
128 : : * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
129 : : * and must either activate asynchronous updates and return zero, return
130 : : * a negative error or return a positive frequency for synchronous
131 : : * indication (e.g. 1 for one on/off cycle per second). If it returns
132 : : * a frequency then it will be called again at intervals with the
133 : : * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
134 : : * the indicator accordingly. Finally, it is called with the argument
135 : : * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
136 : : * negative error code or zero.
137 : : * @get_ethtool_stats: Return extended statistics about the device.
138 : : * This is only useful if the device maintains statistics not
139 : : * included in &struct rtnl_link_stats64.
140 : : * @begin: Function to be called before any other operation. Returns a
141 : : * negative error code or zero.
142 : : * @complete: Function to be called after any other operation except
143 : : * @begin. Will be called even if the other operation failed.
144 : : * @get_priv_flags: Report driver-specific feature flags.
145 : : * @set_priv_flags: Set driver-specific feature flags. Returns a negative
146 : : * error code or zero.
147 : : * @get_sset_count: Get number of strings that @get_strings will write.
148 : : * @get_rxnfc: Get RX flow classification rules. Returns a negative
149 : : * error code or zero.
150 : : * @set_rxnfc: Set RX flow classification rules. Returns a negative
151 : : * error code or zero.
152 : : * @flash_device: Write a firmware image to device's flash memory.
153 : : * Returns a negative error code or zero.
154 : : * @reset: Reset (part of) the device, as specified by a bitmask of
155 : : * flags from &enum ethtool_reset_flags. Returns a negative
156 : : * error code or zero.
157 : : * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
158 : : * Returns zero if not supported for this specific device.
159 : : * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
160 : : * Will not be called if @get_rxfh_indir_size returns zero.
161 : : * Returns a negative error code or zero.
162 : : * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
163 : : * Will not be called if @get_rxfh_indir_size returns zero.
164 : : * Returns a negative error code or zero.
165 : : * @get_channels: Get number of channels.
166 : : * @set_channels: Set number of channels. Returns a negative error code or
167 : : * zero.
168 : : * @get_dump_flag: Get dump flag indicating current dump length, version,
169 : : * and flag of the device.
170 : : * @get_dump_data: Get dump data.
171 : : * @set_dump: Set dump specific flags to the device.
172 : : * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
173 : : * Drivers supporting transmit time stamps in software should set this to
174 : : * ethtool_op_get_ts_info().
175 : : * @get_module_info: Get the size and type of the eeprom contained within
176 : : * a plug-in module.
177 : : * @get_module_eeprom: Get the eeprom information from the plug-in module
178 : : * @get_eee: Get Energy-Efficient (EEE) supported and status.
179 : : * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
180 : : *
181 : : * All operations are optional (i.e. the function pointer may be set
182 : : * to %NULL) and callers must take this into account. Callers must
183 : : * hold the RTNL lock.
184 : : *
185 : : * See the structures used by these operations for further documentation.
186 : : *
187 : : * See &struct net_device and &struct net_device_ops for documentation
188 : : * of the generic netdev features interface.
189 : : */
190 : : struct ethtool_ops {
191 : : int (*get_settings)(struct net_device *, struct ethtool_cmd *);
192 : : int (*set_settings)(struct net_device *, struct ethtool_cmd *);
193 : : void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
194 : : int (*get_regs_len)(struct net_device *);
195 : : void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
196 : : void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
197 : : int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
198 : : u32 (*get_msglevel)(struct net_device *);
199 : : void (*set_msglevel)(struct net_device *, u32);
200 : : int (*nway_reset)(struct net_device *);
201 : : u32 (*get_link)(struct net_device *);
202 : : int (*get_eeprom_len)(struct net_device *);
203 : : int (*get_eeprom)(struct net_device *,
204 : : struct ethtool_eeprom *, u8 *);
205 : : int (*set_eeprom)(struct net_device *,
206 : : struct ethtool_eeprom *, u8 *);
207 : : int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
208 : : int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
209 : : void (*get_ringparam)(struct net_device *,
210 : : struct ethtool_ringparam *);
211 : : int (*set_ringparam)(struct net_device *,
212 : : struct ethtool_ringparam *);
213 : : void (*get_pauseparam)(struct net_device *,
214 : : struct ethtool_pauseparam*);
215 : : int (*set_pauseparam)(struct net_device *,
216 : : struct ethtool_pauseparam*);
217 : : void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
218 : : void (*get_strings)(struct net_device *, u32 stringset, u8 *);
219 : : int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
220 : : void (*get_ethtool_stats)(struct net_device *,
221 : : struct ethtool_stats *, u64 *);
222 : : int (*begin)(struct net_device *);
223 : : void (*complete)(struct net_device *);
224 : : u32 (*get_priv_flags)(struct net_device *);
225 : : int (*set_priv_flags)(struct net_device *, u32);
226 : : int (*get_sset_count)(struct net_device *, int);
227 : : int (*get_rxnfc)(struct net_device *,
228 : : struct ethtool_rxnfc *, u32 *rule_locs);
229 : : int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
230 : : int (*flash_device)(struct net_device *, struct ethtool_flash *);
231 : : int (*reset)(struct net_device *, u32 *);
232 : : u32 (*get_rxfh_indir_size)(struct net_device *);
233 : : int (*get_rxfh_indir)(struct net_device *, u32 *);
234 : : int (*set_rxfh_indir)(struct net_device *, const u32 *);
235 : : void (*get_channels)(struct net_device *, struct ethtool_channels *);
236 : : int (*set_channels)(struct net_device *, struct ethtool_channels *);
237 : : int (*get_dump_flag)(struct net_device *, struct ethtool_dump *);
238 : : int (*get_dump_data)(struct net_device *,
239 : : struct ethtool_dump *, void *);
240 : : int (*set_dump)(struct net_device *, struct ethtool_dump *);
241 : : int (*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
242 : : int (*get_module_info)(struct net_device *,
243 : : struct ethtool_modinfo *);
244 : : int (*get_module_eeprom)(struct net_device *,
245 : : struct ethtool_eeprom *, u8 *);
246 : : int (*get_eee)(struct net_device *, struct ethtool_eee *);
247 : : int (*set_eee)(struct net_device *, struct ethtool_eee *);
248 : :
249 : :
250 : : };
251 : : #endif /* _LINUX_ETHTOOL_H */
|