Branch data Line data Source code
1 : : /* linux/include/linux/clocksource.h
2 : : *
3 : : * This file contains the structure definitions for clocksources.
4 : : *
5 : : * If you are not a clocksource, or timekeeping code, you should
6 : : * not be including this file!
7 : : */
8 : : #ifndef _LINUX_CLOCKSOURCE_H
9 : : #define _LINUX_CLOCKSOURCE_H
10 : :
11 : : #include <linux/types.h>
12 : : #include <linux/timex.h>
13 : : #include <linux/time.h>
14 : : #include <linux/list.h>
15 : : #include <linux/cache.h>
16 : : #include <linux/timer.h>
17 : : #include <linux/init.h>
18 : : #include <asm/div64.h>
19 : : #include <asm/io.h>
20 : :
21 : : /* clocksource cycle base type */
22 : : typedef u64 cycle_t;
23 : : struct clocksource;
24 : : struct module;
25 : :
26 : : #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
27 : : #include <asm/clocksource.h>
28 : : #endif
29 : :
30 : : /**
31 : : * struct cyclecounter - hardware abstraction for a free running counter
32 : : * Provides completely state-free accessors to the underlying hardware.
33 : : * Depending on which hardware it reads, the cycle counter may wrap
34 : : * around quickly. Locking rules (if necessary) have to be defined
35 : : * by the implementor and user of specific instances of this API.
36 : : *
37 : : * @read: returns the current cycle value
38 : : * @mask: bitmask for two's complement
39 : : * subtraction of non 64 bit counters,
40 : : * see CLOCKSOURCE_MASK() helper macro
41 : : * @mult: cycle to nanosecond multiplier
42 : : * @shift: cycle to nanosecond divisor (power of two)
43 : : */
44 : : struct cyclecounter {
45 : : cycle_t (*read)(const struct cyclecounter *cc);
46 : : cycle_t mask;
47 : : u32 mult;
48 : : u32 shift;
49 : : };
50 : :
51 : : /**
52 : : * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
53 : : * Contains the state needed by timecounter_read() to detect
54 : : * cycle counter wrap around. Initialize with
55 : : * timecounter_init(). Also used to convert cycle counts into the
56 : : * corresponding nanosecond counts with timecounter_cyc2time(). Users
57 : : * of this code are responsible for initializing the underlying
58 : : * cycle counter hardware, locking issues and reading the time
59 : : * more often than the cycle counter wraps around. The nanosecond
60 : : * counter will only wrap around after ~585 years.
61 : : *
62 : : * @cc: the cycle counter used by this instance
63 : : * @cycle_last: most recent cycle counter value seen by
64 : : * timecounter_read()
65 : : * @nsec: continuously increasing count
66 : : */
67 : : struct timecounter {
68 : : const struct cyclecounter *cc;
69 : : cycle_t cycle_last;
70 : : u64 nsec;
71 : : };
72 : :
73 : : /**
74 : : * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
75 : : * @cc: Pointer to cycle counter.
76 : : * @cycles: Cycles
77 : : *
78 : : * XXX - This could use some mult_lxl_ll() asm optimization. Same code
79 : : * as in cyc2ns, but with unsigned result.
80 : : */
81 : : static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
82 : : cycle_t cycles)
83 : : {
84 : : u64 ret = (u64)cycles;
85 : 0 : ret = (ret * cc->mult) >> cc->shift;
86 : : return ret;
87 : : }
88 : :
89 : : /**
90 : : * timecounter_init - initialize a time counter
91 : : * @tc: Pointer to time counter which is to be initialized/reset
92 : : * @cc: A cycle counter, ready to be used.
93 : : * @start_tstamp: Arbitrary initial time stamp.
94 : : *
95 : : * After this call the current cycle register (roughly) corresponds to
96 : : * the initial time stamp. Every call to timecounter_read() increments
97 : : * the time stamp counter by the number of elapsed nanoseconds.
98 : : */
99 : : extern void timecounter_init(struct timecounter *tc,
100 : : const struct cyclecounter *cc,
101 : : u64 start_tstamp);
102 : :
103 : : /**
104 : : * timecounter_read - return nanoseconds elapsed since timecounter_init()
105 : : * plus the initial time stamp
106 : : * @tc: Pointer to time counter.
107 : : *
108 : : * In other words, keeps track of time since the same epoch as
109 : : * the function which generated the initial time stamp.
110 : : */
111 : : extern u64 timecounter_read(struct timecounter *tc);
112 : :
113 : : /**
114 : : * timecounter_cyc2time - convert a cycle counter to same
115 : : * time base as values returned by
116 : : * timecounter_read()
117 : : * @tc: Pointer to time counter.
118 : : * @cycle_tstamp: a value returned by tc->cc->read()
119 : : *
120 : : * Cycle counts that are converted correctly as long as they
121 : : * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
122 : : * with "max cycle count" == cs->mask+1.
123 : : *
124 : : * This allows conversion of cycle counter values which were generated
125 : : * in the past.
126 : : */
127 : : extern u64 timecounter_cyc2time(struct timecounter *tc,
128 : : cycle_t cycle_tstamp);
129 : :
130 : : /**
131 : : * struct clocksource - hardware abstraction for a free running counter
132 : : * Provides mostly state-free accessors to the underlying hardware.
133 : : * This is the structure used for system time.
134 : : *
135 : : * @name: ptr to clocksource name
136 : : * @list: list head for registration
137 : : * @rating: rating value for selection (higher is better)
138 : : * To avoid rating inflation the following
139 : : * list should give you a guide as to how
140 : : * to assign your clocksource a rating
141 : : * 1-99: Unfit for real use
142 : : * Only available for bootup and testing purposes.
143 : : * 100-199: Base level usability.
144 : : * Functional for real use, but not desired.
145 : : * 200-299: Good.
146 : : * A correct and usable clocksource.
147 : : * 300-399: Desired.
148 : : * A reasonably fast and accurate clocksource.
149 : : * 400-499: Perfect
150 : : * The ideal clocksource. A must-use where
151 : : * available.
152 : : * @read: returns a cycle value, passes clocksource as argument
153 : : * @enable: optional function to enable the clocksource
154 : : * @disable: optional function to disable the clocksource
155 : : * @mask: bitmask for two's complement
156 : : * subtraction of non 64 bit counters
157 : : * @mult: cycle to nanosecond multiplier
158 : : * @shift: cycle to nanosecond divisor (power of two)
159 : : * @max_idle_ns: max idle time permitted by the clocksource (nsecs)
160 : : * @maxadj: maximum adjustment value to mult (~11%)
161 : : * @flags: flags describing special properties
162 : : * @archdata: arch-specific data
163 : : * @suspend: suspend function for the clocksource, if necessary
164 : : * @resume: resume function for the clocksource, if necessary
165 : : * @cycle_last: most recent cycle counter value seen by ::read()
166 : : * @owner: module reference, must be set by clocksource in modules
167 : : */
168 : : struct clocksource {
169 : : /*
170 : : * Hotpath data, fits in a single cache line when the
171 : : * clocksource itself is cacheline aligned.
172 : : */
173 : : cycle_t (*read)(struct clocksource *cs);
174 : : cycle_t cycle_last;
175 : : cycle_t mask;
176 : : u32 mult;
177 : : u32 shift;
178 : : u64 max_idle_ns;
179 : : u32 maxadj;
180 : : #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
181 : : struct arch_clocksource_data archdata;
182 : : #endif
183 : :
184 : : const char *name;
185 : : struct list_head list;
186 : : int rating;
187 : : int (*enable)(struct clocksource *cs);
188 : : void (*disable)(struct clocksource *cs);
189 : : unsigned long flags;
190 : : void (*suspend)(struct clocksource *cs);
191 : : void (*resume)(struct clocksource *cs);
192 : :
193 : : /* private: */
194 : : #ifdef CONFIG_CLOCKSOURCE_WATCHDOG
195 : : /* Watchdog related data, used by the framework */
196 : : struct list_head wd_list;
197 : : cycle_t cs_last;
198 : : cycle_t wd_last;
199 : : #endif
200 : : struct module *owner;
201 : : } ____cacheline_aligned;
202 : :
203 : : /*
204 : : * Clock source flags bits::
205 : : */
206 : : #define CLOCK_SOURCE_IS_CONTINUOUS 0x01
207 : : #define CLOCK_SOURCE_MUST_VERIFY 0x02
208 : :
209 : : #define CLOCK_SOURCE_WATCHDOG 0x10
210 : : #define CLOCK_SOURCE_VALID_FOR_HRES 0x20
211 : : #define CLOCK_SOURCE_UNSTABLE 0x40
212 : : #define CLOCK_SOURCE_SUSPEND_NONSTOP 0x80
213 : : #define CLOCK_SOURCE_RESELECT 0x100
214 : :
215 : : /* simplify initialization of mask field */
216 : : #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
217 : :
218 : : /**
219 : : * clocksource_khz2mult - calculates mult from khz and shift
220 : : * @khz: Clocksource frequency in KHz
221 : : * @shift_constant: Clocksource shift factor
222 : : *
223 : : * Helper functions that converts a khz counter frequency to a timsource
224 : : * multiplier, given the clocksource shift value
225 : : */
226 : : static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
227 : : {
228 : : /* khz = cyc/(Million ns)
229 : : * mult/2^shift = ns/cyc
230 : : * mult = ns/cyc * 2^shift
231 : : * mult = 1Million/khz * 2^shift
232 : : * mult = 1000000 * 2^shift / khz
233 : : * mult = (1000000<<shift) / khz
234 : : */
235 : : u64 tmp = ((u64)1000000) << shift_constant;
236 : :
237 : : tmp += khz/2; /* round for do_div */
238 : : do_div(tmp, khz);
239 : :
240 : : return (u32)tmp;
241 : : }
242 : :
243 : : /**
244 : : * clocksource_hz2mult - calculates mult from hz and shift
245 : : * @hz: Clocksource frequency in Hz
246 : : * @shift_constant: Clocksource shift factor
247 : : *
248 : : * Helper functions that converts a hz counter
249 : : * frequency to a timsource multiplier, given the
250 : : * clocksource shift value
251 : : */
252 : : static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
253 : : {
254 : : /* hz = cyc/(Billion ns)
255 : : * mult/2^shift = ns/cyc
256 : : * mult = ns/cyc * 2^shift
257 : : * mult = 1Billion/hz * 2^shift
258 : : * mult = 1000000000 * 2^shift / hz
259 : : * mult = (1000000000<<shift) / hz
260 : : */
261 : : u64 tmp = ((u64)1000000000) << shift_constant;
262 : :
263 : : tmp += hz/2; /* round for do_div */
264 : : do_div(tmp, hz);
265 : :
266 : : return (u32)tmp;
267 : : }
268 : :
269 : : /**
270 : : * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
271 : : * @cycles: cycles
272 : : * @mult: cycle to nanosecond multiplier
273 : : * @shift: cycle to nanosecond divisor (power of two)
274 : : *
275 : : * Converts cycles to nanoseconds, using the given mult and shift.
276 : : *
277 : : * XXX - This could use some mult_lxl_ll() asm optimization
278 : : */
279 : : static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
280 : : {
281 : 10 : return ((u64) cycles * mult) >> shift;
282 : : }
283 : :
284 : :
285 : : extern int clocksource_register(struct clocksource*);
286 : : extern int clocksource_unregister(struct clocksource*);
287 : : extern void clocksource_touch_watchdog(void);
288 : : extern struct clocksource* clocksource_get_next(void);
289 : : extern void clocksource_change_rating(struct clocksource *cs, int rating);
290 : : extern void clocksource_suspend(void);
291 : : extern void clocksource_resume(void);
292 : : extern struct clocksource * __init __weak clocksource_default_clock(void);
293 : : extern void clocksource_mark_unstable(struct clocksource *cs);
294 : :
295 : : extern u64
296 : : clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask);
297 : : extern void
298 : : clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
299 : :
300 : : /*
301 : : * Don't call __clocksource_register_scale directly, use
302 : : * clocksource_register_hz/khz
303 : : */
304 : : extern int
305 : : __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
306 : : extern void
307 : : __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
308 : :
309 : : static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
310 : : {
311 : 0 : return __clocksource_register_scale(cs, 1, hz);
312 : : }
313 : :
314 : : static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
315 : : {
316 : : return __clocksource_register_scale(cs, 1000, khz);
317 : : }
318 : :
319 : : static inline void __clocksource_updatefreq_hz(struct clocksource *cs, u32 hz)
320 : : {
321 : : __clocksource_updatefreq_scale(cs, 1, hz);
322 : : }
323 : :
324 : : static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz)
325 : : {
326 : : __clocksource_updatefreq_scale(cs, 1000, khz);
327 : : }
328 : :
329 : :
330 : : extern int timekeeping_notify(struct clocksource *clock);
331 : :
332 : : extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
333 : : extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
334 : : extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
335 : : extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
336 : :
337 : : extern int clocksource_mmio_init(void __iomem *, const char *,
338 : : unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
339 : :
340 : : extern int clocksource_i8253_init(void);
341 : :
342 : : struct device_node;
343 : : typedef void(*clocksource_of_init_fn)(struct device_node *);
344 : : #ifdef CONFIG_CLKSRC_OF
345 : : extern void clocksource_of_init(void);
346 : :
347 : : #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
348 : : static const struct of_device_id __clksrc_of_table_##name \
349 : : __used __section(__clksrc_of_table) \
350 : : = { .compatible = compat, \
351 : : .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
352 : : #else
353 : : static inline void clocksource_of_init(void) {}
354 : : #define CLOCKSOURCE_OF_DECLARE(name, compat, fn) \
355 : : static const struct of_device_id __clksrc_of_table_##name \
356 : : __attribute__((unused)) \
357 : : = { .compatible = compat, \
358 : : .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
359 : : #endif
360 : :
361 : : #endif /* _LINUX_CLOCKSOURCE_H */
|