Branch data Line data Source code
1 : : /*
2 : : * linux/include/linux/clk.h
3 : : *
4 : : * Copyright (C) 2004 ARM Limited.
5 : : * Written by Deep Blue Solutions Limited.
6 : : * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
7 : : *
8 : : * This program is free software; you can redistribute it and/or modify
9 : : * it under the terms of the GNU General Public License version 2 as
10 : : * published by the Free Software Foundation.
11 : : */
12 : : #ifndef __LINUX_CLK_H
13 : : #define __LINUX_CLK_H
14 : :
15 : : #include <linux/err.h>
16 : : #include <linux/kernel.h>
17 : : #include <linux/notifier.h>
18 : :
19 : : struct device;
20 : :
21 : : struct clk;
22 : :
23 : : #ifdef CONFIG_COMMON_CLK
24 : :
25 : : /**
26 : : * DOC: clk notifier callback types
27 : : *
28 : : * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
29 : : * to indicate that the rate change will proceed. Drivers must
30 : : * immediately terminate any operations that will be affected by the
31 : : * rate change. Callbacks may either return NOTIFY_DONE, NOTIFY_OK,
32 : : * NOTIFY_STOP or NOTIFY_BAD.
33 : : *
34 : : * ABORT_RATE_CHANGE: called if the rate change failed for some reason
35 : : * after PRE_RATE_CHANGE. In this case, all registered notifiers on
36 : : * the clk will be called with ABORT_RATE_CHANGE. Callbacks must
37 : : * always return NOTIFY_DONE or NOTIFY_OK.
38 : : *
39 : : * POST_RATE_CHANGE - called after the clk rate change has successfully
40 : : * completed. Callbacks must always return NOTIFY_DONE or NOTIFY_OK.
41 : : *
42 : : */
43 : : #define PRE_RATE_CHANGE BIT(0)
44 : : #define POST_RATE_CHANGE BIT(1)
45 : : #define ABORT_RATE_CHANGE BIT(2)
46 : :
47 : : /**
48 : : * struct clk_notifier - associate a clk with a notifier
49 : : * @clk: struct clk * to associate the notifier with
50 : : * @notifier_head: a blocking_notifier_head for this clk
51 : : * @node: linked list pointers
52 : : *
53 : : * A list of struct clk_notifier is maintained by the notifier code.
54 : : * An entry is created whenever code registers the first notifier on a
55 : : * particular @clk. Future notifiers on that @clk are added to the
56 : : * @notifier_head.
57 : : */
58 : : struct clk_notifier {
59 : : struct clk *clk;
60 : : struct srcu_notifier_head notifier_head;
61 : : struct list_head node;
62 : : };
63 : :
64 : : /**
65 : : * struct clk_notifier_data - rate data to pass to the notifier callback
66 : : * @clk: struct clk * being changed
67 : : * @old_rate: previous rate of this clk
68 : : * @new_rate: new rate of this clk
69 : : *
70 : : * For a pre-notifier, old_rate is the clk's rate before this rate
71 : : * change, and new_rate is what the rate will be in the future. For a
72 : : * post-notifier, old_rate and new_rate are both set to the clk's
73 : : * current rate (this was done to optimize the implementation).
74 : : */
75 : : struct clk_notifier_data {
76 : : struct clk *clk;
77 : : unsigned long old_rate;
78 : : unsigned long new_rate;
79 : : };
80 : :
81 : : int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
82 : :
83 : : int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
84 : :
85 : : #endif
86 : :
87 : : /**
88 : : * clk_prepare - prepare a clock source
89 : : * @clk: clock source
90 : : *
91 : : * This prepares the clock source for use.
92 : : *
93 : : * Must not be called from within atomic context.
94 : : */
95 : : #ifdef CONFIG_HAVE_CLK_PREPARE
96 : : int clk_prepare(struct clk *clk);
97 : : #else
98 : : static inline int clk_prepare(struct clk *clk)
99 : : {
100 : : might_sleep();
101 : : return 0;
102 : : }
103 : : #endif
104 : :
105 : : /**
106 : : * clk_unprepare - undo preparation of a clock source
107 : : * @clk: clock source
108 : : *
109 : : * This undoes a previously prepared clock. The caller must balance
110 : : * the number of prepare and unprepare calls.
111 : : *
112 : : * Must not be called from within atomic context.
113 : : */
114 : : #ifdef CONFIG_HAVE_CLK_PREPARE
115 : : void clk_unprepare(struct clk *clk);
116 : : #else
117 : : static inline void clk_unprepare(struct clk *clk)
118 : : {
119 : : might_sleep();
120 : : }
121 : : #endif
122 : :
123 : : #ifdef CONFIG_HAVE_CLK
124 : : /**
125 : : * clk_get - lookup and obtain a reference to a clock producer.
126 : : * @dev: device for clock "consumer"
127 : : * @id: clock consumer ID
128 : : *
129 : : * Returns a struct clk corresponding to the clock producer, or
130 : : * valid IS_ERR() condition containing errno. The implementation
131 : : * uses @dev and @id to determine the clock consumer, and thereby
132 : : * the clock producer. (IOW, @id may be identical strings, but
133 : : * clk_get may return different clock producers depending on @dev.)
134 : : *
135 : : * Drivers must assume that the clock source is not enabled.
136 : : *
137 : : * clk_get should not be called from within interrupt context.
138 : : */
139 : : struct clk *clk_get(struct device *dev, const char *id);
140 : :
141 : : /**
142 : : * devm_clk_get - lookup and obtain a managed reference to a clock producer.
143 : : * @dev: device for clock "consumer"
144 : : * @id: clock consumer ID
145 : : *
146 : : * Returns a struct clk corresponding to the clock producer, or
147 : : * valid IS_ERR() condition containing errno. The implementation
148 : : * uses @dev and @id to determine the clock consumer, and thereby
149 : : * the clock producer. (IOW, @id may be identical strings, but
150 : : * clk_get may return different clock producers depending on @dev.)
151 : : *
152 : : * Drivers must assume that the clock source is not enabled.
153 : : *
154 : : * devm_clk_get should not be called from within interrupt context.
155 : : *
156 : : * The clock will automatically be freed when the device is unbound
157 : : * from the bus.
158 : : */
159 : : struct clk *devm_clk_get(struct device *dev, const char *id);
160 : :
161 : : /**
162 : : * clk_enable - inform the system when the clock source should be running.
163 : : * @clk: clock source
164 : : *
165 : : * If the clock can not be enabled/disabled, this should return success.
166 : : *
167 : : * May be called from atomic contexts.
168 : : *
169 : : * Returns success (0) or negative errno.
170 : : */
171 : : int clk_enable(struct clk *clk);
172 : :
173 : : /**
174 : : * clk_disable - inform the system when the clock source is no longer required.
175 : : * @clk: clock source
176 : : *
177 : : * Inform the system that a clock source is no longer required by
178 : : * a driver and may be shut down.
179 : : *
180 : : * May be called from atomic contexts.
181 : : *
182 : : * Implementation detail: if the clock source is shared between
183 : : * multiple drivers, clk_enable() calls must be balanced by the
184 : : * same number of clk_disable() calls for the clock source to be
185 : : * disabled.
186 : : */
187 : : void clk_disable(struct clk *clk);
188 : :
189 : : /**
190 : : * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
191 : : * This is only valid once the clock source has been enabled.
192 : : * @clk: clock source
193 : : */
194 : : unsigned long clk_get_rate(struct clk *clk);
195 : :
196 : : /**
197 : : * clk_put - "free" the clock source
198 : : * @clk: clock source
199 : : *
200 : : * Note: drivers must ensure that all clk_enable calls made on this
201 : : * clock source are balanced by clk_disable calls prior to calling
202 : : * this function.
203 : : *
204 : : * clk_put should not be called from within interrupt context.
205 : : */
206 : : void clk_put(struct clk *clk);
207 : :
208 : : /**
209 : : * devm_clk_put - "free" a managed clock source
210 : : * @dev: device used to acuqire the clock
211 : : * @clk: clock source acquired with devm_clk_get()
212 : : *
213 : : * Note: drivers must ensure that all clk_enable calls made on this
214 : : * clock source are balanced by clk_disable calls prior to calling
215 : : * this function.
216 : : *
217 : : * clk_put should not be called from within interrupt context.
218 : : */
219 : : void devm_clk_put(struct device *dev, struct clk *clk);
220 : :
221 : : /*
222 : : * The remaining APIs are optional for machine class support.
223 : : */
224 : :
225 : :
226 : : /**
227 : : * clk_round_rate - adjust a rate to the exact rate a clock can provide
228 : : * @clk: clock source
229 : : * @rate: desired clock rate in Hz
230 : : *
231 : : * Returns rounded clock rate in Hz, or negative errno.
232 : : */
233 : : long clk_round_rate(struct clk *clk, unsigned long rate);
234 : :
235 : : /**
236 : : * clk_set_rate - set the clock rate for a clock source
237 : : * @clk: clock source
238 : : * @rate: desired clock rate in Hz
239 : : *
240 : : * Returns success (0) or negative errno.
241 : : */
242 : : int clk_set_rate(struct clk *clk, unsigned long rate);
243 : :
244 : : /**
245 : : * clk_set_parent - set the parent clock source for this clock
246 : : * @clk: clock source
247 : : * @parent: parent clock source
248 : : *
249 : : * Returns success (0) or negative errno.
250 : : */
251 : : int clk_set_parent(struct clk *clk, struct clk *parent);
252 : :
253 : : /**
254 : : * clk_get_parent - get the parent clock source for this clock
255 : : * @clk: clock source
256 : : *
257 : : * Returns struct clk corresponding to parent clock source, or
258 : : * valid IS_ERR() condition containing errno.
259 : : */
260 : : struct clk *clk_get_parent(struct clk *clk);
261 : :
262 : : /**
263 : : * clk_get_sys - get a clock based upon the device name
264 : : * @dev_id: device name
265 : : * @con_id: connection ID
266 : : *
267 : : * Returns a struct clk corresponding to the clock producer, or
268 : : * valid IS_ERR() condition containing errno. The implementation
269 : : * uses @dev_id and @con_id to determine the clock consumer, and
270 : : * thereby the clock producer. In contrast to clk_get() this function
271 : : * takes the device name instead of the device itself for identification.
272 : : *
273 : : * Drivers must assume that the clock source is not enabled.
274 : : *
275 : : * clk_get_sys should not be called from within interrupt context.
276 : : */
277 : : struct clk *clk_get_sys(const char *dev_id, const char *con_id);
278 : :
279 : : #else /* !CONFIG_HAVE_CLK */
280 : :
281 : : static inline struct clk *clk_get(struct device *dev, const char *id)
282 : : {
283 : : return NULL;
284 : : }
285 : :
286 : : static inline struct clk *devm_clk_get(struct device *dev, const char *id)
287 : : {
288 : : return NULL;
289 : : }
290 : :
291 : : static inline void clk_put(struct clk *clk) {}
292 : :
293 : : static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
294 : :
295 : : static inline int clk_enable(struct clk *clk)
296 : : {
297 : : return 0;
298 : : }
299 : :
300 : : static inline void clk_disable(struct clk *clk) {}
301 : :
302 : : static inline unsigned long clk_get_rate(struct clk *clk)
303 : : {
304 : : return 0;
305 : : }
306 : :
307 : : static inline int clk_set_rate(struct clk *clk, unsigned long rate)
308 : : {
309 : : return 0;
310 : : }
311 : :
312 : : static inline long clk_round_rate(struct clk *clk, unsigned long rate)
313 : : {
314 : : return 0;
315 : : }
316 : :
317 : : static inline int clk_set_parent(struct clk *clk, struct clk *parent)
318 : : {
319 : : return 0;
320 : : }
321 : :
322 : : static inline struct clk *clk_get_parent(struct clk *clk)
323 : : {
324 : : return NULL;
325 : : }
326 : :
327 : : #endif
328 : :
329 : : /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
330 : : static inline int clk_prepare_enable(struct clk *clk)
331 : : {
332 : : int ret;
333 : :
334 : 0 : ret = clk_prepare(clk);
335 [ # # ]: 0 : if (ret)
336 : : return ret;
337 : 0 : ret = clk_enable(clk);
338 [ # # ]: 0 : if (ret)
339 : 0 : clk_unprepare(clk);
340 : :
341 : : return ret;
342 : : }
343 : :
344 : : /* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
345 : : static inline void clk_disable_unprepare(struct clk *clk)
346 : : {
347 : 0 : clk_disable(clk);
348 : 0 : clk_unprepare(clk);
349 : : }
350 : :
351 : : /**
352 : : * clk_add_alias - add a new clock alias
353 : : * @alias: name for clock alias
354 : : * @alias_dev_name: device name
355 : : * @id: platform specific clock name
356 : : * @dev: device
357 : : *
358 : : * Allows using generic clock names for drivers by adding a new alias.
359 : : * Assumes clkdev, see clkdev.h for more info.
360 : : */
361 : : int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
362 : : struct device *dev);
363 : :
364 : : struct device_node;
365 : : struct of_phandle_args;
366 : :
367 : : #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
368 : : struct clk *of_clk_get(struct device_node *np, int index);
369 : : struct clk *of_clk_get_by_name(struct device_node *np, const char *name);
370 : : struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec);
371 : : #else
372 : : static inline struct clk *of_clk_get(struct device_node *np, int index)
373 : : {
374 : : return ERR_PTR(-ENOENT);
375 : : }
376 : : static inline struct clk *of_clk_get_by_name(struct device_node *np,
377 : : const char *name)
378 : : {
379 : : return ERR_PTR(-ENOENT);
380 : : }
381 : : #endif
382 : :
383 : : #endif
|