Branch data Line data Source code
1 : : /*
2 : : * JFFS2 -- Journalling Flash File System, Version 2.
3 : : *
4 : : * Copyright © 2001-2007 Red Hat, Inc.
5 : : * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
6 : : *
7 : : * Created by David Woodhouse <dwmw2@infradead.org>
8 : : *
9 : : * For licensing information, see the file 'LICENCE' in this directory.
10 : : *
11 : : */
12 : :
13 : : #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14 : :
15 : : #include <linux/kernel.h>
16 : : #include <linux/jffs2.h>
17 : : #include <linux/mtd/mtd.h>
18 : : #include <linux/completion.h>
19 : : #include <linux/sched.h>
20 : : #include <linux/freezer.h>
21 : : #include <linux/kthread.h>
22 : : #include "nodelist.h"
23 : :
24 : :
25 : : static int jffs2_garbage_collect_thread(void *);
26 : :
27 : 0 : void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
28 : : {
29 [ # # ]: 0 : assert_spin_locked(&c->erase_completion_lock);
30 [ # # ][ # # ]: 0 : if (c->gc_task && jffs2_thread_should_wake(c))
31 : 0 : send_sig(SIGHUP, c->gc_task, 1);
32 : 0 : }
33 : :
34 : : /* This must only ever be called when no GC thread is currently running */
35 : 0 : int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
36 : : {
37 : : struct task_struct *tsk;
38 : : int ret = 0;
39 : :
40 [ # # ]: 0 : BUG_ON(c->gc_task);
41 : :
42 : : init_completion(&c->gc_thread_start);
43 : : init_completion(&c->gc_thread_exit);
44 : :
45 [ # # ]: 0 : tsk = kthread_run(jffs2_garbage_collect_thread, c, "jffs2_gcd_mtd%d", c->mtd->index);
46 [ # # ]: 0 : if (IS_ERR(tsk)) {
47 : 0 : pr_warn("fork failed for JFFS2 garbage collect thread: %ld\n",
48 : : -PTR_ERR(tsk));
49 : 0 : complete(&c->gc_thread_exit);
50 : : ret = PTR_ERR(tsk);
51 : : } else {
52 : : /* Wait for it... */
53 : : jffs2_dbg(1, "Garbage collect thread is pid %d\n", tsk->pid);
54 : 0 : wait_for_completion(&c->gc_thread_start);
55 : 0 : ret = tsk->pid;
56 : : }
57 : :
58 : 0 : return ret;
59 : : }
60 : :
61 : 0 : void jffs2_stop_garbage_collect_thread(struct jffs2_sb_info *c)
62 : : {
63 : : int wait = 0;
64 : : spin_lock(&c->erase_completion_lock);
65 [ # # ]: 0 : if (c->gc_task) {
66 : : jffs2_dbg(1, "Killing GC task %d\n", c->gc_task->pid);
67 : 0 : send_sig(SIGKILL, c->gc_task, 1);
68 : : wait = 1;
69 : : }
70 : : spin_unlock(&c->erase_completion_lock);
71 [ # # ]: 0 : if (wait)
72 : 0 : wait_for_completion(&c->gc_thread_exit);
73 : 0 : }
74 : :
75 : 0 : static int jffs2_garbage_collect_thread(void *_c)
76 : : {
77 : : struct jffs2_sb_info *c = _c;
78 : :
79 : 0 : allow_signal(SIGKILL);
80 : 0 : allow_signal(SIGSTOP);
81 : 0 : allow_signal(SIGCONT);
82 : :
83 : 0 : c->gc_task = current;
84 : 0 : complete(&c->gc_thread_start);
85 : :
86 : 0 : set_user_nice(current, 10);
87 : :
88 : 0 : set_freezable();
89 : : for (;;) {
90 : 0 : allow_signal(SIGHUP);
91 : : again:
92 : : spin_lock(&c->erase_completion_lock);
93 [ # # ]: 0 : if (!jffs2_thread_should_wake(c)) {
94 : 0 : set_current_state (TASK_INTERRUPTIBLE);
95 : : spin_unlock(&c->erase_completion_lock);
96 : : jffs2_dbg(1, "%s(): sleeping...\n", __func__);
97 : 0 : schedule();
98 : : } else
99 : : spin_unlock(&c->erase_completion_lock);
100 : :
101 : :
102 : : /* Problem - immediately after bootup, the GCD spends a lot
103 : : * of time in places like jffs2_kill_fragtree(); so much so
104 : : * that userspace processes (like gdm and X) are starved
105 : : * despite plenty of cond_resched()s and renicing. Yield()
106 : : * doesn't help, either (presumably because userspace and GCD
107 : : * are generally competing for a higher latency resource -
108 : : * disk).
109 : : * This forces the GCD to slow the hell down. Pulling an
110 : : * inode in with read_inode() is much preferable to having
111 : : * the GC thread get there first. */
112 : 0 : schedule_timeout_interruptible(msecs_to_jiffies(50));
113 : :
114 [ # # ]: 0 : if (kthread_should_stop()) {
115 : : jffs2_dbg(1, "%s(): kthread_stop() called\n", __func__);
116 : : goto die;
117 : : }
118 : :
119 : : /* Put_super will send a SIGKILL and then wait on the sem.
120 : : */
121 [ # # ][ # # ]: 0 : while (signal_pending(current) || freezing(current)) {
122 : : siginfo_t info;
123 : : unsigned long signr;
124 : :
125 [ # # ]: 0 : if (try_to_freeze())
126 : : goto again;
127 : :
128 : 0 : signr = dequeue_signal_lock(current, ¤t->blocked, &info);
129 : :
130 [ # # # ]: 0 : switch(signr) {
131 : : case SIGSTOP:
132 : : jffs2_dbg(1, "%s(): SIGSTOP received\n",
133 : : __func__);
134 : 0 : set_current_state(TASK_STOPPED);
135 : 0 : schedule();
136 : 0 : break;
137 : :
138 : : case SIGKILL:
139 : : jffs2_dbg(1, "%s(): SIGKILL received\n",
140 : : __func__);
141 : 0 : goto die;
142 : :
143 : : case SIGHUP:
144 : : jffs2_dbg(1, "%s(): SIGHUP received\n",
145 : : __func__);
146 : : break;
147 : : default:
148 : : jffs2_dbg(1, "%s(): signal %ld received\n",
149 : : __func__, signr);
150 : : }
151 : : }
152 : : /* We don't want SIGHUP to interrupt us. STOP and KILL are OK though. */
153 : 0 : disallow_signal(SIGHUP);
154 : :
155 : : jffs2_dbg(1, "%s(): pass\n", __func__);
156 [ # # ]: 0 : if (jffs2_garbage_collect_pass(c) == -ENOSPC) {
157 : 0 : pr_notice("No space for garbage collection. Aborting GC thread\n");
158 : 0 : goto die;
159 : : }
160 : : }
161 : : die:
162 : : spin_lock(&c->erase_completion_lock);
163 : 0 : c->gc_task = NULL;
164 : : spin_unlock(&c->erase_completion_lock);
165 : 0 : complete_and_exit(&c->gc_thread_exit, 0);
166 : : }
|