Branch data Line data Source code
1 : : /* Driver for USB Mass Storage compliant devices
2 : : *
3 : : * Current development and maintenance by:
4 : : * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
5 : : *
6 : : * Developed with the assistance of:
7 : : * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
8 : : * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu)
9 : : *
10 : : * Initial work by:
11 : : * (c) 1999 Michael Gee (michael@linuxspecific.com)
12 : : *
13 : : * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
14 : : * (c) 2000 Yggdrasil Computing, Inc.
15 : : *
16 : : * This driver is based on the 'USB Mass Storage Class' document. This
17 : : * describes in detail the protocol used to communicate with such
18 : : * devices. Clearly, the designers had SCSI and ATAPI commands in
19 : : * mind when they created this document. The commands are all very
20 : : * similar to commands in the SCSI-II and ATAPI specifications.
21 : : *
22 : : * It is important to note that in a number of cases this class
23 : : * exhibits class-specific exemptions from the USB specification.
24 : : * Notably the usage of NAK, STALL and ACK differs from the norm, in
25 : : * that they are used to communicate wait, failed and OK on commands.
26 : : *
27 : : * Also, for certain devices, the interrupt endpoint is used to convey
28 : : * status of a command.
29 : : *
30 : : * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
31 : : * information about this driver.
32 : : *
33 : : * This program is free software; you can redistribute it and/or modify it
34 : : * under the terms of the GNU General Public License as published by the
35 : : * Free Software Foundation; either version 2, or (at your option) any
36 : : * later version.
37 : : *
38 : : * This program is distributed in the hope that it will be useful, but
39 : : * WITHOUT ANY WARRANTY; without even the implied warranty of
40 : : * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
41 : : * General Public License for more details.
42 : : *
43 : : * You should have received a copy of the GNU General Public License along
44 : : * with this program; if not, write to the Free Software Foundation, Inc.,
45 : : * 675 Mass Ave, Cambridge, MA 02139, USA.
46 : : */
47 : :
48 : : #ifdef CONFIG_USB_STORAGE_DEBUG
49 : : #define DEBUG
50 : : #endif
51 : :
52 : : #include <linux/sched.h>
53 : : #include <linux/errno.h>
54 : : #include <linux/freezer.h>
55 : : #include <linux/module.h>
56 : : #include <linux/init.h>
57 : : #include <linux/slab.h>
58 : : #include <linux/kthread.h>
59 : : #include <linux/mutex.h>
60 : : #include <linux/utsname.h>
61 : :
62 : : #include <scsi/scsi.h>
63 : : #include <scsi/scsi_cmnd.h>
64 : : #include <scsi/scsi_device.h>
65 : :
66 : : #include "usb.h"
67 : : #include "scsiglue.h"
68 : : #include "transport.h"
69 : : #include "protocol.h"
70 : : #include "debug.h"
71 : : #include "initializers.h"
72 : :
73 : : #include "sierra_ms.h"
74 : : #include "option_ms.h"
75 : :
76 : : /* Some informational data */
77 : : MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
78 : : MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
79 : : MODULE_LICENSE("GPL");
80 : :
81 : : static unsigned int delay_use = 1;
82 : : module_param(delay_use, uint, S_IRUGO | S_IWUSR);
83 : : MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
84 : :
85 : : static char quirks[128];
86 : : module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR);
87 : : MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
88 : :
89 : :
90 : : /*
91 : : * The entries in this table correspond, line for line,
92 : : * with the entries in usb_storage_usb_ids[], defined in usual-tables.c.
93 : : */
94 : :
95 : : /* The vendor name should be kept at eight characters or less, and
96 : : * the product name should be kept at 16 characters or less. If a device
97 : : * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
98 : : * normally generated by a device thorugh the INQUIRY response will be
99 : : * taken from this list, and this is the reason for the above size
100 : : * restriction. However, if the flag is not present, then you
101 : : * are free to use as many characters as you like.
102 : : */
103 : :
104 : : #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
105 : : vendor_name, product_name, use_protocol, use_transport, \
106 : : init_function, Flags) \
107 : : { \
108 : : .vendorName = vendor_name, \
109 : : .productName = product_name, \
110 : : .useProtocol = use_protocol, \
111 : : .useTransport = use_transport, \
112 : : .initFunction = init_function, \
113 : : }
114 : :
115 : : #define COMPLIANT_DEV UNUSUAL_DEV
116 : :
117 : : #define USUAL_DEV(use_protocol, use_transport) \
118 : : { \
119 : : .useProtocol = use_protocol, \
120 : : .useTransport = use_transport, \
121 : : }
122 : :
123 : : #define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
124 : : vendor_name, product_name, use_protocol, use_transport, \
125 : : init_function, Flags) \
126 : : { \
127 : : .vendorName = vendor_name, \
128 : : .productName = product_name, \
129 : : .useProtocol = use_protocol, \
130 : : .useTransport = use_transport, \
131 : : .initFunction = init_function, \
132 : : }
133 : :
134 : : static struct us_unusual_dev us_unusual_dev_list[] = {
135 : : # include "unusual_devs.h"
136 : : { } /* Terminating entry */
137 : : };
138 : :
139 : : static struct us_unusual_dev for_dynamic_ids =
140 : : USUAL_DEV(USB_SC_SCSI, USB_PR_BULK);
141 : :
142 : : #undef UNUSUAL_DEV
143 : : #undef COMPLIANT_DEV
144 : : #undef USUAL_DEV
145 : : #undef UNUSUAL_VENDOR_INTF
146 : :
147 : : #ifdef CONFIG_LOCKDEP
148 : :
149 : : static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
150 : :
151 : : static void us_set_lock_class(struct mutex *mutex,
152 : : struct usb_interface *intf)
153 : : {
154 : : struct usb_device *udev = interface_to_usbdev(intf);
155 : : struct usb_host_config *config = udev->actconfig;
156 : : int i;
157 : :
158 : : for (i = 0; i < config->desc.bNumInterfaces; i++) {
159 : : if (config->interface[i] == intf)
160 : : break;
161 : : }
162 : :
163 : : BUG_ON(i == config->desc.bNumInterfaces);
164 : :
165 : : lockdep_set_class(mutex, &us_interface_key[i]);
166 : : }
167 : :
168 : : #else
169 : :
170 : : static void us_set_lock_class(struct mutex *mutex,
171 : : struct usb_interface *intf)
172 : : {
173 : : }
174 : :
175 : : #endif
176 : :
177 : : #ifdef CONFIG_PM /* Minimal support for suspend and resume */
178 : :
179 : 0 : int usb_stor_suspend(struct usb_interface *iface, pm_message_t message)
180 : : {
181 : : struct us_data *us = usb_get_intfdata(iface);
182 : :
183 : : /* Wait until no command is running */
184 : 0 : mutex_lock(&us->dev_mutex);
185 : :
186 [ # # ]: 0 : if (us->suspend_resume_hook)
187 : 0 : (us->suspend_resume_hook)(us, US_SUSPEND);
188 : :
189 : : /* When runtime PM is working, we'll set a flag to indicate
190 : : * whether we should autoresume when a SCSI request arrives. */
191 : :
192 : 0 : mutex_unlock(&us->dev_mutex);
193 : 0 : return 0;
194 : : }
195 : : EXPORT_SYMBOL_GPL(usb_stor_suspend);
196 : :
197 : 0 : int usb_stor_resume(struct usb_interface *iface)
198 : : {
199 : : struct us_data *us = usb_get_intfdata(iface);
200 : :
201 : 0 : mutex_lock(&us->dev_mutex);
202 : :
203 [ # # ]: 0 : if (us->suspend_resume_hook)
204 : 0 : (us->suspend_resume_hook)(us, US_RESUME);
205 : :
206 : 0 : mutex_unlock(&us->dev_mutex);
207 : 0 : return 0;
208 : : }
209 : : EXPORT_SYMBOL_GPL(usb_stor_resume);
210 : :
211 : 0 : int usb_stor_reset_resume(struct usb_interface *iface)
212 : : {
213 : : struct us_data *us = usb_get_intfdata(iface);
214 : :
215 : : /* Report the reset to the SCSI core */
216 : 0 : usb_stor_report_bus_reset(us);
217 : :
218 : : /* FIXME: Notify the subdrivers that they need to reinitialize
219 : : * the device */
220 : 0 : return 0;
221 : : }
222 : : EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
223 : :
224 : : #endif /* CONFIG_PM */
225 : :
226 : : /*
227 : : * The next two routines get called just before and just after
228 : : * a USB port reset, whether from this driver or a different one.
229 : : */
230 : :
231 : 0 : int usb_stor_pre_reset(struct usb_interface *iface)
232 : : {
233 : : struct us_data *us = usb_get_intfdata(iface);
234 : :
235 : : /* Make sure no command runs during the reset */
236 : 0 : mutex_lock(&us->dev_mutex);
237 : 0 : return 0;
238 : : }
239 : : EXPORT_SYMBOL_GPL(usb_stor_pre_reset);
240 : :
241 : 0 : int usb_stor_post_reset(struct usb_interface *iface)
242 : : {
243 : : struct us_data *us = usb_get_intfdata(iface);
244 : :
245 : : /* Report the reset to the SCSI core */
246 : 0 : usb_stor_report_bus_reset(us);
247 : :
248 : : /* FIXME: Notify the subdrivers that they need to reinitialize
249 : : * the device */
250 : :
251 : 0 : mutex_unlock(&us->dev_mutex);
252 : 0 : return 0;
253 : : }
254 : : EXPORT_SYMBOL_GPL(usb_stor_post_reset);
255 : :
256 : : /*
257 : : * fill_inquiry_response takes an unsigned char array (which must
258 : : * be at least 36 characters) and populates the vendor name,
259 : : * product name, and revision fields. Then the array is copied
260 : : * into the SCSI command's response buffer (oddly enough
261 : : * called request_buffer). data_len contains the length of the
262 : : * data array, which again must be at least 36.
263 : : */
264 : :
265 : 0 : void fill_inquiry_response(struct us_data *us, unsigned char *data,
266 : : unsigned int data_len)
267 : : {
268 [ # # ]: 0 : if (data_len < 36) /* You lose. */
269 : 0 : return;
270 : :
271 : 0 : memset(data+8, ' ', 28);
272 [ # # ]: 0 : if (data[0]&0x20) { /* USB device currently not connected. Return
273 : : peripheral qualifier 001b ("...however, the
274 : : physical device is not currently connected
275 : : to this logical unit") and leave vendor and
276 : : product identification empty. ("If the target
277 : : does store some of the INQUIRY data on the
278 : : device, it may return zeros or ASCII spaces
279 : : (20h) in those fields until the data is
280 : : available from the device."). */
281 : : } else {
282 : 0 : u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
283 : : int n;
284 : :
285 : 0 : n = strlen(us->unusual_dev->vendorName);
286 : 0 : memcpy(data+8, us->unusual_dev->vendorName, min(8, n));
287 : 0 : n = strlen(us->unusual_dev->productName);
288 : 0 : memcpy(data+16, us->unusual_dev->productName, min(16, n));
289 : :
290 : 0 : data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
291 : 0 : data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
292 : 0 : data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
293 : 0 : data[35] = 0x30 + ((bcdDevice) & 0x0F);
294 : : }
295 : :
296 : 0 : usb_stor_set_xfer_buf(data, data_len, us->srb);
297 : : }
298 : : EXPORT_SYMBOL_GPL(fill_inquiry_response);
299 : :
300 : 0 : static int usb_stor_control_thread(void * __us)
301 : : {
302 : : struct us_data *us = (struct us_data *)__us;
303 : : struct Scsi_Host *host = us_to_host(us);
304 : :
305 : : for (;;) {
306 : : usb_stor_dbg(us, "*** thread sleeping\n");
307 [ + - ]: 480403 : if (wait_for_completion_interruptible(&us->cmnd_ready))
308 : : break;
309 : :
310 : : usb_stor_dbg(us, "*** thread awakened\n");
311 : :
312 : : /* lock the device pointers */
313 : 480403 : mutex_lock(&(us->dev_mutex));
314 : :
315 : : /* lock access to the state */
316 : 480403 : scsi_lock(host);
317 : :
318 : : /* When we are called with no command pending, we're done */
319 [ - + ]: 480403 : if (us->srb == NULL) {
320 : 0 : scsi_unlock(host);
321 : 0 : mutex_unlock(&us->dev_mutex);
322 : : usb_stor_dbg(us, "-- exiting\n");
323 : 0 : break;
324 : : }
325 : :
326 : : /* has the command timed out *already* ? */
327 [ - + ]: 480403 : if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
328 : 0 : us->srb->result = DID_ABORT << 16;
329 : 0 : goto SkipForAbort;
330 : : }
331 : :
332 : 480403 : scsi_unlock(host);
333 : :
334 : : /* reject the command if the direction indicator
335 : : * is UNKNOWN
336 : : */
337 [ - + ]: 480403 : if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
338 : : usb_stor_dbg(us, "UNKNOWN data direction\n");
339 : 0 : us->srb->result = DID_ERROR << 16;
340 : : }
341 : :
342 : : /* reject if target != 0 or if LUN is higher than
343 : : * the maximum known LUN
344 : : */
345 [ - + ][ # # ]: 480403 : else if (us->srb->device->id &&
346 : 0 : !(us->fflags & US_FL_SCM_MULT_TARG)) {
347 : : usb_stor_dbg(us, "Bad target number (%d:%d)\n",
348 : : us->srb->device->id, us->srb->device->lun);
349 : 0 : us->srb->result = DID_BAD_TARGET << 16;
350 : : }
351 : :
352 [ - + ]: 480403 : else if (us->srb->device->lun > us->max_lun) {
353 : : usb_stor_dbg(us, "Bad LUN (%d:%d)\n",
354 : : us->srb->device->id, us->srb->device->lun);
355 : 0 : us->srb->result = DID_BAD_TARGET << 16;
356 : : }
357 : :
358 : : /* Handle those devices which need us to fake
359 : : * their inquiry data */
360 [ - + ][ # # ]: 480403 : else if ((us->srb->cmnd[0] == INQUIRY) &&
361 : 0 : (us->fflags & US_FL_FIX_INQUIRY)) {
362 : 0 : unsigned char data_ptr[36] = {
363 : : 0x00, 0x80, 0x02, 0x02,
364 : : 0x1F, 0x00, 0x00, 0x00};
365 : :
366 : : usb_stor_dbg(us, "Faking INQUIRY command\n");
367 : 0 : fill_inquiry_response(us, data_ptr, 36);
368 : 0 : us->srb->result = SAM_STAT_GOOD;
369 : : }
370 : :
371 : : /* we've got a command, let's do it! */
372 : : else {
373 : : US_DEBUG(usb_stor_show_command(us, us->srb));
374 : 480403 : us->proto_handler(us->srb, us);
375 : : usb_mark_last_busy(us->pusb_dev);
376 : : }
377 : :
378 : : /* lock access to the state */
379 : 480403 : scsi_lock(host);
380 : :
381 : : /* indicate that the command is done */
382 [ + - ]: 480403 : if (us->srb->result != DID_ABORT << 16) {
383 : : usb_stor_dbg(us, "scsi cmd done, result=0x%x\n",
384 : : us->srb->result);
385 : 480403 : us->srb->scsi_done(us->srb);
386 : : } else {
387 : : SkipForAbort:
388 : : usb_stor_dbg(us, "scsi command aborted\n");
389 : : }
390 : :
391 : : /* If an abort request was received we need to signal that
392 : : * the abort has finished. The proper test for this is
393 : : * the TIMED_OUT flag, not srb->result == DID_ABORT, because
394 : : * the timeout might have occurred after the command had
395 : : * already completed with a different result code. */
396 [ - + ]: 480403 : if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
397 : 0 : complete(&(us->notify));
398 : :
399 : : /* Allow USB transfers to resume */
400 : 0 : clear_bit(US_FLIDX_ABORTING, &us->dflags);
401 : 0 : clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
402 : : }
403 : :
404 : : /* finished working on this command */
405 : 480403 : us->srb = NULL;
406 : 480403 : scsi_unlock(host);
407 : :
408 : : /* unlock the device pointers */
409 : 480403 : mutex_unlock(&us->dev_mutex);
410 : 480403 : } /* for (;;) */
411 : :
412 : : /* Wait until we are told to stop */
413 : : for (;;) {
414 : 0 : set_current_state(TASK_INTERRUPTIBLE);
415 [ # # ]: 0 : if (kthread_should_stop())
416 : : break;
417 : 0 : schedule();
418 : 0 : }
419 : 0 : __set_current_state(TASK_RUNNING);
420 : 0 : return 0;
421 : : }
422 : :
423 : : /***********************************************************************
424 : : * Device probing and disconnecting
425 : : ***********************************************************************/
426 : :
427 : : /* Associate our private data with the USB device */
428 : 0 : static int associate_dev(struct us_data *us, struct usb_interface *intf)
429 : : {
430 : : /* Fill in the device-related fields */
431 : 0 : us->pusb_dev = interface_to_usbdev(intf);
432 : 0 : us->pusb_intf = intf;
433 : 0 : us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
434 : : usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
435 : : le16_to_cpu(us->pusb_dev->descriptor.idVendor),
436 : : le16_to_cpu(us->pusb_dev->descriptor.idProduct),
437 : : le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
438 : : usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
439 : : intf->cur_altsetting->desc.bInterfaceSubClass,
440 : : intf->cur_altsetting->desc.bInterfaceProtocol);
441 : :
442 : : /* Store our private data in the interface */
443 : : usb_set_intfdata(intf, us);
444 : :
445 : : /* Allocate the control/setup and DMA-mapped buffers */
446 : 0 : us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
447 [ # # ]: 0 : if (!us->cr)
448 : : return -ENOMEM;
449 : :
450 : 0 : us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
451 : : GFP_KERNEL, &us->iobuf_dma);
452 [ # # ]: 0 : if (!us->iobuf) {
453 : : usb_stor_dbg(us, "I/O buffer allocation failed\n");
454 : : return -ENOMEM;
455 : : }
456 : 0 : return 0;
457 : : }
458 : :
459 : : /* Works only for digits and letters, but small and fast */
460 : : #define TOLOWER(x) ((x) | 0x20)
461 : :
462 : : /* Adjust device flags based on the "quirks=" module parameter */
463 : 0 : static void adjust_quirks(struct us_data *us)
464 : : {
465 : : char *p;
466 : 0 : u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
467 : 0 : u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
468 : : unsigned f = 0;
469 : : unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
470 : : US_FL_FIX_CAPACITY |
471 : : US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
472 : : US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
473 : : US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
474 : : US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
475 : : US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
476 : : US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE);
477 : :
478 : 0 : p = quirks;
479 [ # # ]: 0 : while (*p) {
480 : : /* Each entry consists of VID:PID:flags */
481 [ # # ][ # # ]: 0 : if (vid == simple_strtoul(p, &p, 16) &&
482 [ # # ]: 0 : *p == ':' &&
483 [ # # ]: 0 : pid == simple_strtoul(p+1, &p, 16) &&
484 : 0 : *p == ':')
485 : : break;
486 : :
487 : : /* Move forward to the next entry */
488 [ # # ]: 0 : while (*p) {
489 [ # # ]: 0 : if (*p++ == ',')
490 : : break;
491 : : }
492 : : }
493 [ # # ]: 0 : if (!*p) /* No match */
494 : 0 : return;
495 : :
496 : : /* Collect the flags */
497 [ # # ][ # # ]: 0 : while (*++p && *p != ',') {
498 [ # # # # : 0 : switch (TOLOWER(*p)) {
# # # # #
# # # # #
# # ]
499 : : case 'a':
500 : 0 : f |= US_FL_SANE_SENSE;
501 : : break;
502 : : case 'b':
503 : 0 : f |= US_FL_BAD_SENSE;
504 : : break;
505 : : case 'c':
506 : 0 : f |= US_FL_FIX_CAPACITY;
507 : : break;
508 : : case 'd':
509 : 0 : f |= US_FL_NO_READ_DISC_INFO;
510 : : break;
511 : : case 'e':
512 : 0 : f |= US_FL_NO_READ_CAPACITY_16;
513 : : break;
514 : : case 'h':
515 : 0 : f |= US_FL_CAPACITY_HEURISTICS;
516 : : break;
517 : : case 'i':
518 : 0 : f |= US_FL_IGNORE_DEVICE;
519 : : break;
520 : : case 'l':
521 : 0 : f |= US_FL_NOT_LOCKABLE;
522 : : break;
523 : : case 'm':
524 : 0 : f |= US_FL_MAX_SECTORS_64;
525 : : break;
526 : : case 'n':
527 : 0 : f |= US_FL_INITIAL_READ10;
528 : : break;
529 : : case 'o':
530 : 0 : f |= US_FL_CAPACITY_OK;
531 : : break;
532 : : case 'p':
533 : 0 : f |= US_FL_WRITE_CACHE;
534 : : break;
535 : : case 'r':
536 : 0 : f |= US_FL_IGNORE_RESIDUE;
537 : : break;
538 : : case 's':
539 : 0 : f |= US_FL_SINGLE_LUN;
540 : : break;
541 : : case 'w':
542 : 0 : f |= US_FL_NO_WP_DETECT;
543 : : break;
544 : : /* Ignore unrecognized flag characters */
545 : : }
546 : : }
547 : 0 : us->fflags = (us->fflags & ~mask) | f;
548 : : }
549 : :
550 : : /* Get the unusual_devs entries and the string descriptors */
551 : 0 : static int get_device_info(struct us_data *us, const struct usb_device_id *id,
552 : : struct us_unusual_dev *unusual_dev)
553 : : {
554 : 0 : struct usb_device *dev = us->pusb_dev;
555 : : struct usb_interface_descriptor *idesc =
556 : 0 : &us->pusb_intf->cur_altsetting->desc;
557 : 0 : struct device *pdev = &us->pusb_intf->dev;
558 : :
559 : : /* Store the entries */
560 : 0 : us->unusual_dev = unusual_dev;
561 [ # # ]: 0 : us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
562 : : idesc->bInterfaceSubClass :
563 : : unusual_dev->useProtocol;
564 [ # # ]: 0 : us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
565 : : idesc->bInterfaceProtocol :
566 : : unusual_dev->useTransport;
567 : 0 : us->fflags = id->driver_info;
568 : 0 : adjust_quirks(us);
569 : :
570 [ # # ]: 0 : if (us->fflags & US_FL_IGNORE_DEVICE) {
571 : 0 : dev_info(pdev, "device ignored\n");
572 : 0 : return -ENODEV;
573 : : }
574 : :
575 : : /*
576 : : * This flag is only needed when we're in high-speed, so let's
577 : : * disable it if we're in full-speed
578 : : */
579 [ # # ]: 0 : if (dev->speed != USB_SPEED_HIGH)
580 : 0 : us->fflags &= ~US_FL_GO_SLOW;
581 : :
582 [ # # ]: 0 : if (us->fflags)
583 : 0 : dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
584 : : le16_to_cpu(dev->descriptor.idVendor),
585 : : le16_to_cpu(dev->descriptor.idProduct),
586 : : us->fflags);
587 : :
588 : : /* Log a message if a non-generic unusual_dev entry contains an
589 : : * unnecessary subclass or protocol override. This may stimulate
590 : : * reports from users that will help us remove unneeded entries
591 : : * from the unusual_devs.h table.
592 : : */
593 [ # # ][ # # ]: 0 : if (id->idVendor || id->idProduct) {
594 : : static const char *msgs[3] = {
595 : : "an unneeded SubClass entry",
596 : : "an unneeded Protocol entry",
597 : : "unneeded SubClass and Protocol entries"};
598 : : struct usb_device_descriptor *ddesc = &dev->descriptor;
599 : : int msg = -1;
600 : :
601 [ # # ][ # # ]: 0 : if (unusual_dev->useProtocol != USB_SC_DEVICE &&
602 : 0 : us->subclass == idesc->bInterfaceSubClass)
603 : : msg += 1;
604 [ # # ][ # # ]: 0 : if (unusual_dev->useTransport != USB_PR_DEVICE &&
605 : 0 : us->protocol == idesc->bInterfaceProtocol)
606 : 0 : msg += 2;
607 [ # # ][ # # ]: 0 : if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
608 : 0 : dev_notice(pdev, "This device "
609 : : "(%04x,%04x,%04x S %02x P %02x)"
610 : : " has %s in unusual_devs.h (kernel"
611 : : " %s)\n"
612 : : " Please send a copy of this message to "
613 : : "<linux-usb@vger.kernel.org> and "
614 : : "<usb-storage@lists.one-eyed-alien.net>\n",
615 : 0 : le16_to_cpu(ddesc->idVendor),
616 : 0 : le16_to_cpu(ddesc->idProduct),
617 : 0 : le16_to_cpu(ddesc->bcdDevice),
618 : 0 : idesc->bInterfaceSubClass,
619 : 0 : idesc->bInterfaceProtocol,
620 : : msgs[msg],
621 : 0 : utsname()->release);
622 : : }
623 : :
624 : : return 0;
625 : : }
626 : :
627 : : /* Get the transport settings */
628 : 0 : static void get_transport(struct us_data *us)
629 : : {
630 [ # # # # ]: 0 : switch (us->protocol) {
631 : : case USB_PR_CB:
632 : 0 : us->transport_name = "Control/Bulk";
633 : 0 : us->transport = usb_stor_CB_transport;
634 : 0 : us->transport_reset = usb_stor_CB_reset;
635 : 0 : us->max_lun = 7;
636 : 0 : break;
637 : :
638 : : case USB_PR_CBI:
639 : 0 : us->transport_name = "Control/Bulk/Interrupt";
640 : 0 : us->transport = usb_stor_CB_transport;
641 : 0 : us->transport_reset = usb_stor_CB_reset;
642 : 0 : us->max_lun = 7;
643 : 0 : break;
644 : :
645 : : case USB_PR_BULK:
646 : 0 : us->transport_name = "Bulk";
647 : 0 : us->transport = usb_stor_Bulk_transport;
648 : 0 : us->transport_reset = usb_stor_Bulk_reset;
649 : 0 : break;
650 : : }
651 : 0 : }
652 : :
653 : : /* Get the protocol settings */
654 : 0 : static void get_protocol(struct us_data *us)
655 : : {
656 [ # # # # : 0 : switch (us->subclass) {
# # # ]
657 : : case USB_SC_RBC:
658 : 0 : us->protocol_name = "Reduced Block Commands (RBC)";
659 : 0 : us->proto_handler = usb_stor_transparent_scsi_command;
660 : 0 : break;
661 : :
662 : : case USB_SC_8020:
663 : 0 : us->protocol_name = "8020i";
664 : 0 : us->proto_handler = usb_stor_pad12_command;
665 : 0 : us->max_lun = 0;
666 : 0 : break;
667 : :
668 : : case USB_SC_QIC:
669 : 0 : us->protocol_name = "QIC-157";
670 : 0 : us->proto_handler = usb_stor_pad12_command;
671 : 0 : us->max_lun = 0;
672 : 0 : break;
673 : :
674 : : case USB_SC_8070:
675 : 0 : us->protocol_name = "8070i";
676 : 0 : us->proto_handler = usb_stor_pad12_command;
677 : 0 : us->max_lun = 0;
678 : 0 : break;
679 : :
680 : : case USB_SC_SCSI:
681 : 0 : us->protocol_name = "Transparent SCSI";
682 : 0 : us->proto_handler = usb_stor_transparent_scsi_command;
683 : 0 : break;
684 : :
685 : : case USB_SC_UFI:
686 : 0 : us->protocol_name = "Uniform Floppy Interface (UFI)";
687 : 0 : us->proto_handler = usb_stor_ufi_command;
688 : 0 : break;
689 : : }
690 : 0 : }
691 : :
692 : : /* Get the pipe settings */
693 : 0 : static int get_pipes(struct us_data *us)
694 : : {
695 : 0 : struct usb_host_interface *altsetting =
696 : 0 : us->pusb_intf->cur_altsetting;
697 : : int i;
698 : 0 : struct usb_endpoint_descriptor *ep;
699 : 0 : struct usb_endpoint_descriptor *ep_in = NULL;
700 : 0 : struct usb_endpoint_descriptor *ep_out = NULL;
701 : 0 : struct usb_endpoint_descriptor *ep_int = NULL;
702 : :
703 : : /*
704 : : * Find the first endpoint of each type we need.
705 : : * We are expecting a minimum of 2 endpoints - in and out (bulk).
706 : : * An optional interrupt-in is OK (necessary for CBI protocol).
707 : : * We will ignore any others.
708 : : */
709 [ # # ]: 0 : for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
710 : 0 : ep = &altsetting->endpoint[i].desc;
711 : :
712 [ # # ]: 0 : if (usb_endpoint_xfer_bulk(ep)) {
713 [ # # ]: 0 : if (usb_endpoint_dir_in(ep)) {
714 [ # # ]: 0 : if (!ep_in)
715 : : ep_in = ep;
716 : : } else {
717 [ # # ]: 0 : if (!ep_out)
718 : : ep_out = ep;
719 : : }
720 : : }
721 : :
722 [ # # ]: 0 : else if (usb_endpoint_is_int_in(ep)) {
723 [ # # ]: 0 : if (!ep_int)
724 : : ep_int = ep;
725 : : }
726 : : }
727 : :
728 [ # # ][ # # ]: 0 : if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
[ # # ]
729 : : usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n");
730 : : return -EIO;
731 : : }
732 : :
733 : : /* Calculate and store the pipe values */
734 : 0 : us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
735 : 0 : us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
736 : 0 : us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
737 : : usb_endpoint_num(ep_out));
738 : 0 : us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
739 : : usb_endpoint_num(ep_in));
740 [ # # ]: 0 : if (ep_int) {
741 : 0 : us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
742 : : usb_endpoint_num(ep_int));
743 : 0 : us->ep_bInterval = ep_int->bInterval;
744 : : }
745 : : return 0;
746 : : }
747 : :
748 : : /* Initialize all the dynamic resources we need */
749 : 0 : static int usb_stor_acquire_resources(struct us_data *us)
750 : : {
751 : : int p;
752 : : struct task_struct *th;
753 : :
754 : 0 : us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
755 [ # # ]: 0 : if (!us->current_urb) {
756 : : usb_stor_dbg(us, "URB allocation failed\n");
757 : : return -ENOMEM;
758 : : }
759 : :
760 : : /* Just before we start our control thread, initialize
761 : : * the device if it needs initialization */
762 [ # # ]: 0 : if (us->unusual_dev->initFunction) {
763 : 0 : p = us->unusual_dev->initFunction(us);
764 [ # # ]: 0 : if (p)
765 : : return p;
766 : : }
767 : :
768 : : /* Start up our control thread */
769 [ # # ]: 0 : th = kthread_run(usb_stor_control_thread, us, "usb-storage");
770 [ # # ]: 0 : if (IS_ERR(th)) {
771 : 0 : dev_warn(&us->pusb_intf->dev,
772 : : "Unable to start control thread\n");
773 : 0 : return PTR_ERR(th);
774 : : }
775 : 0 : us->ctl_thread = th;
776 : :
777 : 0 : return 0;
778 : : }
779 : :
780 : : /* Release all our dynamic resources */
781 : 0 : static void usb_stor_release_resources(struct us_data *us)
782 : : {
783 : : /* Tell the control thread to exit. The SCSI host must
784 : : * already have been removed and the DISCONNECTING flag set
785 : : * so that we won't accept any more commands.
786 : : */
787 : : usb_stor_dbg(us, "-- sending exit command to thread\n");
788 : 0 : complete(&us->cmnd_ready);
789 [ # # ]: 0 : if (us->ctl_thread)
790 : 0 : kthread_stop(us->ctl_thread);
791 : :
792 : : /* Call the destructor routine, if it exists */
793 [ # # ]: 0 : if (us->extra_destructor) {
794 : : usb_stor_dbg(us, "-- calling extra_destructor()\n");
795 : 0 : us->extra_destructor(us->extra);
796 : : }
797 : :
798 : : /* Free the extra data and the URB */
799 : 0 : kfree(us->extra);
800 : 0 : usb_free_urb(us->current_urb);
801 : 0 : }
802 : :
803 : : /* Dissociate from the USB device */
804 : 0 : static void dissociate_dev(struct us_data *us)
805 : : {
806 : : /* Free the buffers */
807 : 0 : kfree(us->cr);
808 : 0 : usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
809 : :
810 : : /* Remove our private data from the interface */
811 : 0 : usb_set_intfdata(us->pusb_intf, NULL);
812 : 0 : }
813 : :
814 : : /* First stage of disconnect processing: stop SCSI scanning,
815 : : * remove the host, and stop accepting new commands
816 : : */
817 : 0 : static void quiesce_and_remove_host(struct us_data *us)
818 : : {
819 : 0 : struct Scsi_Host *host = us_to_host(us);
820 : :
821 : : /* If the device is really gone, cut short reset delays */
822 [ # # ]: 0 : if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
823 : 0 : set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
824 : 0 : wake_up(&us->delay_wait);
825 : : }
826 : :
827 : : /* Prevent SCSI scanning (if it hasn't started yet)
828 : : * or wait for the SCSI-scanning routine to stop.
829 : : */
830 : 0 : cancel_delayed_work_sync(&us->scan_dwork);
831 : :
832 : : /* Balance autopm calls if scanning was cancelled */
833 : : if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
834 : : usb_autopm_put_interface_no_suspend(us->pusb_intf);
835 : :
836 : : /* Removing the host will perform an orderly shutdown: caches
837 : : * synchronized, disks spun down, etc.
838 : : */
839 : 0 : scsi_remove_host(host);
840 : :
841 : : /* Prevent any new commands from being accepted and cut short
842 : : * reset delays.
843 : : */
844 : 0 : scsi_lock(host);
845 : 0 : set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
846 : 0 : scsi_unlock(host);
847 : 0 : wake_up(&us->delay_wait);
848 : 0 : }
849 : :
850 : : /* Second stage of disconnect processing: deallocate all resources */
851 : 0 : static void release_everything(struct us_data *us)
852 : : {
853 : 0 : usb_stor_release_resources(us);
854 : 0 : dissociate_dev(us);
855 : :
856 : : /* Drop our reference to the host; the SCSI core will free it
857 : : * (and "us" along with it) when the refcount becomes 0. */
858 : 0 : scsi_host_put(us_to_host(us));
859 : 0 : }
860 : :
861 : : /* Delayed-work routine to carry out SCSI-device scanning */
862 : 0 : static void usb_stor_scan_dwork(struct work_struct *work)
863 : : {
864 : 0 : struct us_data *us = container_of(work, struct us_data,
865 : : scan_dwork.work);
866 : : struct device *dev = &us->pusb_intf->dev;
867 : :
868 : : dev_dbg(dev, "starting scan\n");
869 : :
870 : : /* For bulk-only devices, determine the max LUN value */
871 [ # # ][ # # ]: 0 : if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
872 : 0 : mutex_lock(&us->dev_mutex);
873 : 0 : us->max_lun = usb_stor_Bulk_max_lun(us);
874 : 0 : mutex_unlock(&us->dev_mutex);
875 : : }
876 : 0 : scsi_scan_host(us_to_host(us));
877 : : dev_dbg(dev, "scan complete\n");
878 : :
879 : : /* Should we unbind if no devices were detected? */
880 : :
881 : : usb_autopm_put_interface(us->pusb_intf);
882 : 0 : clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
883 : 0 : }
884 : :
885 : 0 : static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
886 : : {
887 : : struct usb_device *usb_dev = interface_to_usbdev(intf);
888 : :
889 [ # # ]: 0 : if (usb_dev->bus->sg_tablesize) {
890 : : return usb_dev->bus->sg_tablesize;
891 : : }
892 : : return SG_ALL;
893 : : }
894 : :
895 : : /* First part of general USB mass-storage probing */
896 : 0 : int usb_stor_probe1(struct us_data **pus,
897 : : struct usb_interface *intf,
898 : : const struct usb_device_id *id,
899 : : struct us_unusual_dev *unusual_dev)
900 : : {
901 : : struct Scsi_Host *host;
902 : : struct us_data *us;
903 : : int result;
904 : :
905 : 0 : dev_info(&intf->dev, "USB Mass Storage device detected\n");
906 : :
907 : : /*
908 : : * Ask the SCSI layer to allocate a host structure, with extra
909 : : * space at the end for our private us_data structure.
910 : : */
911 : 0 : host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
912 [ # # ]: 0 : if (!host) {
913 : 0 : dev_warn(&intf->dev, "Unable to allocate the scsi host\n");
914 : 0 : return -ENOMEM;
915 : : }
916 : :
917 : : /*
918 : : * Allow 16-byte CDBs and thus > 2TB
919 : : */
920 : 0 : host->max_cmd_len = 16;
921 : 0 : host->sg_tablesize = usb_stor_sg_tablesize(intf);
922 : 0 : *pus = us = host_to_us(host);
923 : 0 : mutex_init(&(us->dev_mutex));
924 : : us_set_lock_class(&us->dev_mutex, intf);
925 : : init_completion(&us->cmnd_ready);
926 : : init_completion(&(us->notify));
927 : 0 : init_waitqueue_head(&us->delay_wait);
928 : 0 : INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
929 : :
930 : : /* Associate the us_data structure with the USB device */
931 : 0 : result = associate_dev(us, intf);
932 [ # # ]: 0 : if (result)
933 : : goto BadDevice;
934 : :
935 : : /* Get the unusual_devs entries and the descriptors */
936 : 0 : result = get_device_info(us, id, unusual_dev);
937 [ # # ]: 0 : if (result)
938 : : goto BadDevice;
939 : :
940 : : /* Get standard transport and protocol settings */
941 : 0 : get_transport(us);
942 : 0 : get_protocol(us);
943 : :
944 : : /* Give the caller a chance to fill in specialized transport
945 : : * or protocol settings.
946 : : */
947 : 0 : return 0;
948 : :
949 : : BadDevice:
950 : : usb_stor_dbg(us, "storage_probe() failed\n");
951 : 0 : release_everything(us);
952 : 0 : return result;
953 : : }
954 : : EXPORT_SYMBOL_GPL(usb_stor_probe1);
955 : :
956 : : /* Second part of general USB mass-storage probing */
957 : 0 : int usb_stor_probe2(struct us_data *us)
958 : : {
959 : : int result;
960 : 0 : struct device *dev = &us->pusb_intf->dev;
961 : :
962 : : /* Make sure the transport and protocol have both been set */
963 [ # # ][ # # ]: 0 : if (!us->transport || !us->proto_handler) {
964 : : result = -ENXIO;
965 : : goto BadDevice;
966 : : }
967 : : usb_stor_dbg(us, "Transport: %s\n", us->transport_name);
968 : : usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name);
969 : :
970 : : /* fix for single-lun devices */
971 [ # # ]: 0 : if (us->fflags & US_FL_SINGLE_LUN)
972 : 0 : us->max_lun = 0;
973 : :
974 [ # # ]: 0 : if (!(us->fflags & US_FL_SCM_MULT_TARG))
975 : 0 : us_to_host(us)->max_id = 1;
976 : :
977 : : /* Find the endpoints and calculate pipe values */
978 : 0 : result = get_pipes(us);
979 [ # # ]: 0 : if (result)
980 : : goto BadDevice;
981 : :
982 : : /*
983 : : * If the device returns invalid data for the first READ(10)
984 : : * command, indicate the command should be retried.
985 : : */
986 [ # # ]: 0 : if (us->fflags & US_FL_INITIAL_READ10)
987 : 0 : set_bit(US_FLIDX_REDO_READ10, &us->dflags);
988 : :
989 : : /* Acquire all the other resources and add the host */
990 : 0 : result = usb_stor_acquire_resources(us);
991 [ # # ]: 0 : if (result)
992 : : goto BadDevice;
993 : 0 : snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
994 : 0 : dev_name(&us->pusb_intf->dev));
995 : 0 : result = scsi_add_host(us_to_host(us), dev);
996 [ # # ]: 0 : if (result) {
997 : 0 : dev_warn(dev,
998 : : "Unable to add the scsi host\n");
999 : 0 : goto BadDevice;
1000 : : }
1001 : :
1002 : : /* Submit the delayed_work for SCSI-device scanning */
1003 : : usb_autopm_get_interface_no_resume(us->pusb_intf);
1004 : 0 : set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
1005 : :
1006 : : if (delay_use > 0)
1007 : : dev_dbg(dev, "waiting for device to settle before scanning\n");
1008 : 0 : queue_delayed_work(system_freezable_wq, &us->scan_dwork,
1009 : 0 : delay_use * HZ);
1010 : 0 : return 0;
1011 : :
1012 : : /* We come here if there are any problems */
1013 : : BadDevice:
1014 : : usb_stor_dbg(us, "storage_probe() failed\n");
1015 : 0 : release_everything(us);
1016 : 0 : return result;
1017 : : }
1018 : : EXPORT_SYMBOL_GPL(usb_stor_probe2);
1019 : :
1020 : : /* Handle a USB mass-storage disconnect */
1021 : 0 : void usb_stor_disconnect(struct usb_interface *intf)
1022 : : {
1023 : : struct us_data *us = usb_get_intfdata(intf);
1024 : :
1025 : 0 : quiesce_and_remove_host(us);
1026 : 0 : release_everything(us);
1027 : 0 : }
1028 : : EXPORT_SYMBOL_GPL(usb_stor_disconnect);
1029 : :
1030 : : /* The main probe routine for standard devices */
1031 : 0 : static int storage_probe(struct usb_interface *intf,
1032 : : const struct usb_device_id *id)
1033 : : {
1034 : : struct us_unusual_dev *unusual_dev;
1035 : : struct us_data *us;
1036 : : int result;
1037 : : int size;
1038 : :
1039 : : /*
1040 : : * If the device isn't standard (is handled by a subdriver
1041 : : * module) then don't accept it.
1042 : : */
1043 [ # # ]: 0 : if (usb_usual_ignore_device(intf))
1044 : : return -ENXIO;
1045 : :
1046 : : /*
1047 : : * Call the general probe procedures.
1048 : : *
1049 : : * The unusual_dev_list array is parallel to the usb_storage_usb_ids
1050 : : * table, so we use the index of the id entry to find the
1051 : : * corresponding unusual_devs entry.
1052 : : */
1053 : :
1054 : : size = ARRAY_SIZE(us_unusual_dev_list);
1055 [ # # ][ # # ]: 0 : if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
1056 : 0 : unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
1057 : : } else {
1058 : : unusual_dev = &for_dynamic_ids;
1059 : :
1060 : : dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n",
1061 : : id->idVendor, id->idProduct);
1062 : : }
1063 : :
1064 : 0 : result = usb_stor_probe1(&us, intf, id, unusual_dev);
1065 [ # # ]: 0 : if (result)
1066 : : return result;
1067 : :
1068 : : /* No special transport or protocol settings in the main module */
1069 : :
1070 : 0 : result = usb_stor_probe2(us);
1071 : 0 : return result;
1072 : : }
1073 : :
1074 : : static struct usb_driver usb_storage_driver = {
1075 : : .name = "usb-storage",
1076 : : .probe = storage_probe,
1077 : : .disconnect = usb_stor_disconnect,
1078 : : .suspend = usb_stor_suspend,
1079 : : .resume = usb_stor_resume,
1080 : : .reset_resume = usb_stor_reset_resume,
1081 : : .pre_reset = usb_stor_pre_reset,
1082 : : .post_reset = usb_stor_post_reset,
1083 : : .id_table = usb_storage_usb_ids,
1084 : : .supports_autosuspend = 1,
1085 : : .soft_unbind = 1,
1086 : : };
1087 : :
1088 : 0 : module_usb_driver(usb_storage_driver);
|