Branch data Line data Source code
1 : : /*
2 : : * devices.c
3 : : * (C) Copyright 1999 Randy Dunlap.
4 : : * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>.
5 : : * (proc file per device)
6 : : * (C) Copyright 1999 Deti Fliegl (new USB architecture)
7 : : *
8 : : * This program is free software; you can redistribute it and/or modify
9 : : * it under the terms of the GNU General Public License as published by
10 : : * the Free Software Foundation; either version 2 of the License, or
11 : : * (at your option) any later version.
12 : : *
13 : : * This program is distributed in the hope that it will be useful,
14 : : * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 : : * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 : : * GNU General Public License for more details.
17 : : *
18 : : * You should have received a copy of the GNU General Public License
19 : : * along with this program; if not, write to the Free Software
20 : : * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 : : *
22 : : *************************************************************
23 : : *
24 : : * <mountpoint>/devices contains USB topology, device, config, class,
25 : : * interface, & endpoint data.
26 : : *
27 : : * I considered using /proc/bus/usb/devices/device# for each device
28 : : * as it is attached or detached, but I didn't like this for some
29 : : * reason -- maybe it's just too deep of a directory structure.
30 : : * I also don't like looking in multiple places to gather and view
31 : : * the data. Having only one file for ./devices also prevents race
32 : : * conditions that could arise if a program was reading device info
33 : : * for devices that are being removed (unplugged). (That is, the
34 : : * program may find a directory for devnum_12 then try to open it,
35 : : * but it was just unplugged, so the directory is now deleted.
36 : : * But programs would just have to be prepared for situations like
37 : : * this in any plug-and-play environment.)
38 : : *
39 : : * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch>
40 : : * Converted the whole proc stuff to real
41 : : * read methods. Now not the whole device list needs to fit
42 : : * into one page, only the device list for one bus.
43 : : * Added a poll method to /proc/bus/usb/devices, to wake
44 : : * up an eventual usbd
45 : : * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch>
46 : : * Turned into its own filesystem
47 : : * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
48 : : * Converted file reading routine to dump to buffer once
49 : : * per device, not per bus
50 : : */
51 : :
52 : : #include <linux/fs.h>
53 : : #include <linux/mm.h>
54 : : #include <linux/gfp.h>
55 : : #include <linux/poll.h>
56 : : #include <linux/usb.h>
57 : : #include <linux/usbdevice_fs.h>
58 : : #include <linux/usb/hcd.h>
59 : : #include <linux/mutex.h>
60 : : #include <linux/uaccess.h>
61 : :
62 : : #include "usb.h"
63 : :
64 : : /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
65 : : #define ALLOW_SERIAL_NUMBER
66 : :
67 : : static const char format_topo[] =
68 : : /* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */
69 : : "\nT: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n";
70 : :
71 : : static const char format_string_manufacturer[] =
72 : : /* S: Manufacturer=xxxx */
73 : : "S: Manufacturer=%.100s\n";
74 : :
75 : : static const char format_string_product[] =
76 : : /* S: Product=xxxx */
77 : : "S: Product=%.100s\n";
78 : :
79 : : #ifdef ALLOW_SERIAL_NUMBER
80 : : static const char format_string_serialnumber[] =
81 : : /* S: SerialNumber=xxxx */
82 : : "S: SerialNumber=%.100s\n";
83 : : #endif
84 : :
85 : : static const char format_bandwidth[] =
86 : : /* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */
87 : : "B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";
88 : :
89 : : static const char format_device1[] =
90 : : /* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */
91 : : "D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";
92 : :
93 : : static const char format_device2[] =
94 : : /* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */
95 : : "P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";
96 : :
97 : : static const char format_config[] =
98 : : /* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */
99 : : "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";
100 : :
101 : : static const char format_iad[] =
102 : : /* A: FirstIf#=dd IfCount=dd Cls=xx(sssss) Sub=xx Prot=xx */
103 : : "A: FirstIf#=%2d IfCount=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x\n";
104 : :
105 : : static const char format_iface[] =
106 : : /* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
107 : : "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
108 : :
109 : : static const char format_endpt[] =
110 : : /* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */
111 : : "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n";
112 : :
113 : :
114 : : /*
115 : : * Need access to the driver and USB bus lists.
116 : : * extern struct list_head usb_bus_list;
117 : : * However, these will come from functions that return ptrs to each of them.
118 : : */
119 : :
120 : : /*
121 : : * Wait for an connect/disconnect event to happen. We initialize
122 : : * the event counter with an odd number, and each event will increment
123 : : * the event counter by two, so it will always _stay_ odd. That means
124 : : * that it will never be zero, so "event 0" will never match a current
125 : : * event, and thus 'poll' will always trigger as readable for the first
126 : : * time it gets called.
127 : : */
128 : : static struct device_connect_event {
129 : : atomic_t count;
130 : : wait_queue_head_t wait;
131 : : } device_event = {
132 : : .count = ATOMIC_INIT(1),
133 : : .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait)
134 : : };
135 : :
136 : : struct class_info {
137 : : int class;
138 : : char *class_name;
139 : : };
140 : :
141 : : static const struct class_info clas_info[] = {
142 : : /* max. 5 chars. per name string */
143 : : {USB_CLASS_PER_INTERFACE, ">ifc"},
144 : : {USB_CLASS_AUDIO, "audio"},
145 : : {USB_CLASS_COMM, "comm."},
146 : : {USB_CLASS_HID, "HID"},
147 : : {USB_CLASS_PHYSICAL, "PID"},
148 : : {USB_CLASS_STILL_IMAGE, "still"},
149 : : {USB_CLASS_PRINTER, "print"},
150 : : {USB_CLASS_MASS_STORAGE, "stor."},
151 : : {USB_CLASS_HUB, "hub"},
152 : : {USB_CLASS_CDC_DATA, "data"},
153 : : {USB_CLASS_CSCID, "scard"},
154 : : {USB_CLASS_CONTENT_SEC, "c-sec"},
155 : : {USB_CLASS_VIDEO, "video"},
156 : : {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
157 : : {USB_CLASS_MISC, "misc"},
158 : : {USB_CLASS_APP_SPEC, "app."},
159 : : {USB_CLASS_VENDOR_SPEC, "vend."},
160 : : {-1, "unk."} /* leave as last */
161 : : };
162 : :
163 : : /*****************************************************************/
164 : :
165 : 0 : void usbfs_conn_disc_event(void)
166 : : {
167 : : atomic_add(2, &device_event.count);
168 : 0 : wake_up(&device_event.wait);
169 : 0 : }
170 : :
171 : : static const char *class_decode(const int class)
172 : : {
173 : : int ix;
174 : :
175 [ # # ][ # # ]: 0 : for (ix = 0; clas_info[ix].class != -1; ix++)
[ # # ]
176 [ # # ][ # # ]: 0 : if (clas_info[ix].class == class)
[ # # ]
177 : : break;
178 : 0 : return clas_info[ix].class_name;
179 : : }
180 : :
181 : 0 : static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
182 : 0 : const struct usb_endpoint_descriptor *desc)
183 : : {
184 : : char dir, unit, *type;
185 : : unsigned interval, bandwidth = 1;
186 : :
187 [ # # ]: 0 : if (start > end)
188 : : return start;
189 : :
190 [ # # ]: 0 : dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
191 : :
192 [ # # ]: 0 : if (speed == USB_SPEED_HIGH) {
193 [ # # # ]: 0 : switch (usb_endpoint_maxp(desc) & (0x03 << 11)) {
194 : : case 1 << 11:
195 : 0 : bandwidth = 2; break;
196 : : case 2 << 11:
197 : 0 : bandwidth = 3; break;
198 : : }
199 : : }
200 : :
201 : : /* this isn't checking for illegal values */
202 [ # # # # : 0 : switch (usb_endpoint_type(desc)) {
# ]
203 : : case USB_ENDPOINT_XFER_CONTROL:
204 : : type = "Ctrl";
205 [ # # ]: 0 : if (speed == USB_SPEED_HIGH) /* uframes per NAK */
206 : 0 : interval = desc->bInterval;
207 : : else
208 : : interval = 0;
209 : : dir = 'B'; /* ctrl is bidirectional */
210 : : break;
211 : : case USB_ENDPOINT_XFER_ISOC:
212 : : type = "Isoc";
213 : 0 : interval = 1 << (desc->bInterval - 1);
214 : 0 : break;
215 : : case USB_ENDPOINT_XFER_BULK:
216 : : type = "Bulk";
217 [ # # ]: 0 : if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
218 : 0 : interval = desc->bInterval;
219 : : else
220 : : interval = 0;
221 : : break;
222 : : case USB_ENDPOINT_XFER_INT:
223 : : type = "Int.";
224 [ # # ]: 0 : if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
225 : 0 : interval = 1 << (desc->bInterval - 1);
226 : : else
227 : 0 : interval = desc->bInterval;
228 : : break;
229 : : default: /* "can't happen" */
230 : : return start;
231 : : }
232 [ # # ]: 0 : interval *= (speed == USB_SPEED_HIGH ||
233 : 0 : speed == USB_SPEED_SUPER) ? 125 : 1000;
234 [ # # ]: 0 : if (interval % 1000)
235 : : unit = 'u';
236 : : else {
237 : : unit = 'm';
238 : 0 : interval /= 1000;
239 : : }
240 : :
241 : 0 : start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,
242 : : desc->bmAttributes, type,
243 : : (usb_endpoint_maxp(desc) & 0x07ff) *
244 : : bandwidth,
245 : : interval, unit);
246 : 0 : return start;
247 : : }
248 : :
249 : 0 : static char *usb_dump_interface_descriptor(char *start, char *end,
250 : : const struct usb_interface_cache *intfc,
251 : : const struct usb_interface *iface,
252 : : int setno)
253 : : {
254 : : const struct usb_interface_descriptor *desc;
255 : : const char *driver_name = "";
256 : : int active = 0;
257 : :
258 [ # # ]: 0 : if (start > end)
259 : : return start;
260 : 0 : desc = &intfc->altsetting[setno].desc;
261 [ # # ]: 0 : if (iface) {
262 : 0 : driver_name = (iface->dev.driver
263 : : ? iface->dev.driver->name
264 [ # # ]: 0 : : "(none)");
265 : 0 : active = (desc == &iface->cur_altsetting->desc);
266 : : }
267 [ # # ]: 0 : start += sprintf(start, format_iface,
268 : : active ? '*' : ' ', /* mark active altsetting */
269 : 0 : desc->bInterfaceNumber,
270 : 0 : desc->bAlternateSetting,
271 : 0 : desc->bNumEndpoints,
272 : 0 : desc->bInterfaceClass,
273 : : class_decode(desc->bInterfaceClass),
274 : 0 : desc->bInterfaceSubClass,
275 : 0 : desc->bInterfaceProtocol,
276 : : driver_name);
277 : 0 : return start;
278 : : }
279 : :
280 : 0 : static char *usb_dump_interface(int speed, char *start, char *end,
281 : : const struct usb_interface_cache *intfc,
282 : : const struct usb_interface *iface, int setno)
283 : : {
284 : 0 : const struct usb_host_interface *desc = &intfc->altsetting[setno];
285 : : int i;
286 : :
287 : 0 : start = usb_dump_interface_descriptor(start, end, intfc, iface, setno);
288 [ # # ]: 0 : for (i = 0; i < desc->desc.bNumEndpoints; i++) {
289 [ # # ]: 0 : if (start > end)
290 : : return start;
291 : 0 : start = usb_dump_endpoint_descriptor(speed,
292 : 0 : start, end, &desc->endpoint[i].desc);
293 : : }
294 : : return start;
295 : : }
296 : :
297 : 0 : static char *usb_dump_iad_descriptor(char *start, char *end,
298 : : const struct usb_interface_assoc_descriptor *iad)
299 : : {
300 [ # # ]: 0 : if (start > end)
301 : : return start;
302 : 0 : start += sprintf(start, format_iad,
303 : 0 : iad->bFirstInterface,
304 : 0 : iad->bInterfaceCount,
305 : 0 : iad->bFunctionClass,
306 : : class_decode(iad->bFunctionClass),
307 : 0 : iad->bFunctionSubClass,
308 : 0 : iad->bFunctionProtocol);
309 : 0 : return start;
310 : : }
311 : :
312 : : /* TBD:
313 : : * 0. TBDs
314 : : * 1. marking active interface altsettings (code lists all, but should mark
315 : : * which ones are active, if any)
316 : : */
317 : 0 : static char *usb_dump_config_descriptor(char *start, char *end,
318 : : const struct usb_config_descriptor *desc,
319 : : int active, int speed)
320 : : {
321 : : int mul;
322 : :
323 [ # # ]: 0 : if (start > end)
324 : : return start;
325 [ # # ]: 0 : if (speed == USB_SPEED_SUPER)
326 : : mul = 8;
327 : : else
328 : : mul = 2;
329 [ # # ]: 0 : start += sprintf(start, format_config,
330 : : /* mark active/actual/current cfg. */
331 : : active ? '*' : ' ',
332 : 0 : desc->bNumInterfaces,
333 : 0 : desc->bConfigurationValue,
334 : 0 : desc->bmAttributes,
335 : 0 : desc->bMaxPower * mul);
336 : 0 : return start;
337 : : }
338 : :
339 : 0 : static char *usb_dump_config(int speed, char *start, char *end,
340 : : const struct usb_host_config *config, int active)
341 : : {
342 : : int i, j;
343 : : struct usb_interface_cache *intfc;
344 : : struct usb_interface *interface;
345 : :
346 [ # # ]: 0 : if (start > end)
347 : : return start;
348 [ # # ]: 0 : if (!config)
349 : : /* getting these some in 2.3.7; none in 2.3.6 */
350 : 0 : return start + sprintf(start, "(null Cfg. desc.)\n");
351 : 0 : start = usb_dump_config_descriptor(start, end, &config->desc, active,
352 : : speed);
353 [ # # ]: 0 : for (i = 0; i < USB_MAXIADS; i++) {
354 [ # # ]: 0 : if (config->intf_assoc[i] == NULL)
355 : : break;
356 : 0 : start = usb_dump_iad_descriptor(start, end,
357 : : config->intf_assoc[i]);
358 : : }
359 [ # # ]: 0 : for (i = 0; i < config->desc.bNumInterfaces; i++) {
360 : 0 : intfc = config->intf_cache[i];
361 : 0 : interface = config->interface[i];
362 [ # # ]: 0 : for (j = 0; j < intfc->num_altsetting; j++) {
363 [ # # ]: 0 : if (start > end)
364 : : return start;
365 : 0 : start = usb_dump_interface(speed,
366 : : start, end, intfc, interface, j);
367 : : }
368 : : }
369 : : return start;
370 : : }
371 : :
372 : : /*
373 : : * Dump the different USB descriptors.
374 : : */
375 : 0 : static char *usb_dump_device_descriptor(char *start, char *end,
376 : : const struct usb_device_descriptor *desc)
377 : : {
378 : 0 : u16 bcdUSB = le16_to_cpu(desc->bcdUSB);
379 : 0 : u16 bcdDevice = le16_to_cpu(desc->bcdDevice);
380 : :
381 [ # # ]: 0 : if (start > end)
382 : : return start;
383 : 0 : start += sprintf(start, format_device1,
384 : : bcdUSB >> 8, bcdUSB & 0xff,
385 : 0 : desc->bDeviceClass,
386 : : class_decode(desc->bDeviceClass),
387 : 0 : desc->bDeviceSubClass,
388 : 0 : desc->bDeviceProtocol,
389 : 0 : desc->bMaxPacketSize0,
390 : 0 : desc->bNumConfigurations);
391 [ # # ]: 0 : if (start > end)
392 : : return start;
393 : 0 : start += sprintf(start, format_device2,
394 : 0 : le16_to_cpu(desc->idVendor),
395 : 0 : le16_to_cpu(desc->idProduct),
396 : : bcdDevice >> 8, bcdDevice & 0xff);
397 : 0 : return start;
398 : : }
399 : :
400 : : /*
401 : : * Dump the different strings that this device holds.
402 : : */
403 : 0 : static char *usb_dump_device_strings(char *start, char *end,
404 : : struct usb_device *dev)
405 : : {
406 [ # # ]: 0 : if (start > end)
407 : : return start;
408 [ # # ]: 0 : if (dev->manufacturer)
409 : 0 : start += sprintf(start, format_string_manufacturer,
410 : : dev->manufacturer);
411 [ # # ]: 0 : if (start > end)
412 : : goto out;
413 [ # # ]: 0 : if (dev->product)
414 : 0 : start += sprintf(start, format_string_product, dev->product);
415 [ # # ]: 0 : if (start > end)
416 : : goto out;
417 : : #ifdef ALLOW_SERIAL_NUMBER
418 [ # # ]: 0 : if (dev->serial)
419 : 0 : start += sprintf(start, format_string_serialnumber,
420 : : dev->serial);
421 : : #endif
422 : : out:
423 : 0 : return start;
424 : : }
425 : :
426 : 0 : static char *usb_dump_desc(char *start, char *end, struct usb_device *dev)
427 : : {
428 : : int i;
429 : :
430 [ # # ]: 0 : if (start > end)
431 : : return start;
432 : :
433 : 0 : start = usb_dump_device_descriptor(start, end, &dev->descriptor);
434 : :
435 [ # # ]: 0 : if (start > end)
436 : : return start;
437 : :
438 : 0 : start = usb_dump_device_strings(start, end, dev);
439 : :
440 [ # # ]: 0 : for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
441 [ # # ]: 0 : if (start > end)
442 : : return start;
443 : 0 : start = usb_dump_config(dev->speed,
444 : 0 : start, end, dev->config + i,
445 : : /* active ? */
446 : 0 : (dev->config + i) == dev->actconfig);
447 : : }
448 : : return start;
449 : : }
450 : :
451 : :
452 : : #ifdef PROC_EXTRA /* TBD: may want to add this code later */
453 : :
454 : : static char *usb_dump_hub_descriptor(char *start, char *end,
455 : : const struct usb_hub_descriptor *desc)
456 : : {
457 : : int leng = USB_DT_HUB_NONVAR_SIZE;
458 : : unsigned char *ptr = (unsigned char *)desc;
459 : :
460 : : if (start > end)
461 : : return start;
462 : : start += sprintf(start, "Interface:");
463 : : while (leng && start <= end) {
464 : : start += sprintf(start, " %02x", *ptr);
465 : : ptr++; leng--;
466 : : }
467 : : *start++ = '\n';
468 : : return start;
469 : : }
470 : :
471 : : static char *usb_dump_string(char *start, char *end,
472 : : const struct usb_device *dev, char *id, int index)
473 : : {
474 : : if (start > end)
475 : : return start;
476 : : start += sprintf(start, "Interface:");
477 : : if (index <= dev->maxstring && dev->stringindex &&
478 : : dev->stringindex[index])
479 : : start += sprintf(start, "%s: %.100s ", id,
480 : : dev->stringindex[index]);
481 : : return start;
482 : : }
483 : :
484 : : #endif /* PROC_EXTRA */
485 : :
486 : : /*****************************************************************/
487 : :
488 : : /* This is a recursive function. Parameters:
489 : : * buffer - the user-space buffer to write data into
490 : : * nbytes - the maximum number of bytes to write
491 : : * skip_bytes - the number of bytes to skip before writing anything
492 : : * file_offset - the offset into the devices file on completion
493 : : * The caller must own the device lock.
494 : : */
495 : 0 : static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
496 : : loff_t *skip_bytes, loff_t *file_offset,
497 : : struct usb_device *usbdev, struct usb_bus *bus,
498 : : int level, int index, int count)
499 : : {
500 : : int chix;
501 : : int ret, cnt = 0;
502 : : int parent_devnum = 0;
503 : : char *pages_start, *data_end, *speed;
504 : : unsigned int length;
505 : : ssize_t total_written = 0;
506 : : struct usb_device *childdev = NULL;
507 : :
508 : : /* don't bother with anything else if we're not writing any data */
509 [ # # ]: 0 : if (*nbytes <= 0)
510 : : return 0;
511 : :
512 [ # # ]: 0 : if (level > MAX_TOPO_LEVEL)
513 : : return 0;
514 : : /* allocate 2^1 pages = 8K (on i386);
515 : : * should be more than enough for one device */
516 : 0 : pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
517 [ # # ]: 0 : if (!pages_start)
518 : : return -ENOMEM;
519 : :
520 [ # # ][ # # ]: 0 : if (usbdev->parent && usbdev->parent->devnum != -1)
521 : : parent_devnum = usbdev->parent->devnum;
522 : : /*
523 : : * So the root hub's parent is 0 and any device that is
524 : : * plugged into the root hub has a parent of 0.
525 : : */
526 [ # # ]: 0 : switch (usbdev->speed) {
527 : : case USB_SPEED_LOW:
528 : : speed = "1.5"; break;
529 : : case USB_SPEED_UNKNOWN: /* usb 1.1 root hub code */
530 : : case USB_SPEED_FULL:
531 : : speed = "12"; break;
532 : : case USB_SPEED_WIRELESS: /* Wireless has no real fixed speed */
533 : : case USB_SPEED_HIGH:
534 : : speed = "480"; break;
535 : : case USB_SPEED_SUPER:
536 : : speed = "5000"; break;
537 : : default:
538 : : speed = "??";
539 : : }
540 : 0 : data_end = pages_start + sprintf(pages_start, format_topo,
541 : : bus->busnum, level, parent_devnum,
542 : : index, count, usbdev->devnum,
543 : : speed, usbdev->maxchild);
544 : : /*
545 : : * level = topology-tier level;
546 : : * parent_devnum = parent device number;
547 : : * index = parent's connector number;
548 : : * count = device count at this level
549 : : */
550 : : /* If this is the root hub, display the bandwidth information */
551 [ # # ]: 0 : if (level == 0) {
552 : : int max;
553 : :
554 : : /* super/high speed reserves 80%, full/low reserves 90% */
555 [ # # ]: 0 : if (usbdev->speed == USB_SPEED_HIGH ||
556 : : usbdev->speed == USB_SPEED_SUPER)
557 : : max = 800;
558 : : else
559 : : max = FRAME_TIME_MAX_USECS_ALLOC;
560 : :
561 : : /* report "average" periodic allocation over a microsecond.
562 : : * the schedules are actually bursty, HCDs need to deal with
563 : : * that and just compute/report this average.
564 : : */
565 : 0 : data_end += sprintf(data_end, format_bandwidth,
566 : : bus->bandwidth_allocated, max,
567 : 0 : (100 * bus->bandwidth_allocated + max / 2)
568 : : / max,
569 : : bus->bandwidth_int_reqs,
570 : : bus->bandwidth_isoc_reqs);
571 : :
572 : : }
573 : 0 : data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256,
574 : : usbdev);
575 : :
576 [ # # ]: 0 : if (data_end > (pages_start + (2 * PAGE_SIZE) - 256))
577 : 0 : data_end += sprintf(data_end, "(truncated)\n");
578 : :
579 : 0 : length = data_end - pages_start;
580 : : /* if we can start copying some data to the user */
581 [ # # ]: 0 : if (length > *skip_bytes) {
582 : 0 : length -= *skip_bytes;
583 [ # # ]: 0 : if (length > *nbytes)
584 : : length = *nbytes;
585 [ # # ]: 0 : if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) {
586 : 0 : free_pages((unsigned long)pages_start, 1);
587 : 0 : return -EFAULT;
588 : : }
589 : 0 : *nbytes -= length;
590 : 0 : *file_offset += length;
591 : 0 : total_written += length;
592 : 0 : *buffer += length;
593 : 0 : *skip_bytes = 0;
594 : : } else
595 : 0 : *skip_bytes -= length;
596 : :
597 : 0 : free_pages((unsigned long)pages_start, 1);
598 : :
599 : : /* Now look at all of this device's children. */
600 [ # # ][ # # ]: 0 : usb_hub_for_each_child(usbdev, chix, childdev) {
601 : : usb_lock_device(childdev);
602 : 0 : ret = usb_device_dump(buffer, nbytes, skip_bytes,
603 : : file_offset, childdev, bus,
604 : : level + 1, chix - 1, ++cnt);
605 : : usb_unlock_device(childdev);
606 [ # # ]: 0 : if (ret == -EFAULT)
607 : : return total_written;
608 : 0 : total_written += ret;
609 : : }
610 : : return total_written;
611 : : }
612 : :
613 : 0 : static ssize_t usb_device_read(struct file *file, char __user *buf,
614 : : size_t nbytes, loff_t *ppos)
615 : : {
616 : : struct usb_bus *bus;
617 : : ssize_t ret, total_written = 0;
618 : 0 : loff_t skip_bytes = *ppos;
619 : :
620 [ # # ]: 0 : if (*ppos < 0)
621 : : return -EINVAL;
622 [ # # ]: 0 : if (nbytes <= 0)
623 : : return 0;
624 [ # # ]: 0 : if (!access_ok(VERIFY_WRITE, buf, nbytes))
625 : : return -EFAULT;
626 : :
627 : 0 : mutex_lock(&usb_bus_list_lock);
628 : : /* print devices for all busses */
629 [ # # ]: 0 : list_for_each_entry(bus, &usb_bus_list, bus_list) {
630 : : /* recurse through all children of the root hub */
631 [ # # ]: 0 : if (!bus_to_hcd(bus)->rh_registered)
632 : 0 : continue;
633 : 0 : usb_lock_device(bus->root_hub);
634 : 0 : ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,
635 : : bus->root_hub, bus, 0, 0, 0);
636 : 0 : usb_unlock_device(bus->root_hub);
637 [ # # ]: 0 : if (ret < 0) {
638 : 0 : mutex_unlock(&usb_bus_list_lock);
639 : 0 : return ret;
640 : : }
641 : 0 : total_written += ret;
642 : : }
643 : 0 : mutex_unlock(&usb_bus_list_lock);
644 : 0 : return total_written;
645 : : }
646 : :
647 : : /* Kernel lock for "lastev" protection */
648 : 0 : static unsigned int usb_device_poll(struct file *file,
649 : : struct poll_table_struct *wait)
650 : : {
651 : : unsigned int event_count;
652 : :
653 : : poll_wait(file, &device_event.wait, wait);
654 : :
655 : 0 : event_count = atomic_read(&device_event.count);
656 [ # # ]: 0 : if (file->f_version != event_count) {
657 : 0 : file->f_version = event_count;
658 : 0 : return POLLIN | POLLRDNORM;
659 : : }
660 : :
661 : : return 0;
662 : : }
663 : :
664 : 0 : static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig)
665 : : {
666 : : loff_t ret;
667 : :
668 : 0 : mutex_lock(&file_inode(file)->i_mutex);
669 : :
670 [ # # # ]: 0 : switch (orig) {
671 : : case 0:
672 : 0 : file->f_pos = offset;
673 : : ret = file->f_pos;
674 : 0 : break;
675 : : case 1:
676 : 0 : file->f_pos += offset;
677 : : ret = file->f_pos;
678 : 0 : break;
679 : : case 2:
680 : : default:
681 : : ret = -EINVAL;
682 : : }
683 : :
684 : 0 : mutex_unlock(&file_inode(file)->i_mutex);
685 : 0 : return ret;
686 : : }
687 : :
688 : : const struct file_operations usbfs_devices_fops = {
689 : : .llseek = usb_device_lseek,
690 : : .read = usb_device_read,
691 : : .poll = usb_device_poll,
692 : : };
|