Branch data Line data Source code
1 : : /*
2 : : * linux/drivers/mmc/core/sdio_irq.c
3 : : *
4 : : * Author: Nicolas Pitre
5 : : * Created: June 18, 2007
6 : : * Copyright: MontaVista Software Inc.
7 : : *
8 : : * Copyright 2008 Pierre Ossman
9 : : *
10 : : * This program is free software; you can redistribute it and/or modify
11 : : * it under the terms of the GNU General Public License as published by
12 : : * the Free Software Foundation; either version 2 of the License, or (at
13 : : * your option) any later version.
14 : : */
15 : :
16 : : #include <linux/kernel.h>
17 : : #include <linux/sched.h>
18 : : #include <linux/kthread.h>
19 : : #include <linux/export.h>
20 : : #include <linux/wait.h>
21 : : #include <linux/delay.h>
22 : :
23 : : #include <linux/mmc/core.h>
24 : : #include <linux/mmc/host.h>
25 : : #include <linux/mmc/card.h>
26 : : #include <linux/mmc/sdio.h>
27 : : #include <linux/mmc/sdio_func.h>
28 : :
29 : : #include "sdio_ops.h"
30 : :
31 : 0 : static int process_sdio_pending_irqs(struct mmc_host *host)
32 : : {
33 : 0 : struct mmc_card *card = host->card;
34 : : int i, ret, count;
35 : : unsigned char pending;
36 : : struct sdio_func *func;
37 : :
38 : : /*
39 : : * Optimization, if there is only 1 function interrupt registered
40 : : * and we know an IRQ was signaled then call irq handler directly.
41 : : * Otherwise do the full probe.
42 : : */
43 : 0 : func = card->sdio_single_irq;
44 [ # # ][ # # ]: 0 : if (func && host->sdio_irq_pending) {
45 : 0 : func->irq_handler(func);
46 : : return 1;
47 : : }
48 : :
49 : 0 : ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
50 [ # # ]: 0 : if (ret) {
51 : : pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
52 : : mmc_card_id(card), ret);
53 : : return ret;
54 : : }
55 : :
56 : : count = 0;
57 [ # # ]: 0 : for (i = 1; i <= 7; i++) {
58 [ # # ]: 0 : if (pending & (1 << i)) {
59 : 0 : func = card->sdio_func[i - 1];
60 [ # # ]: 0 : if (!func) {
61 : 0 : pr_warning("%s: pending IRQ for "
62 : : "non-existent function\n",
63 : : mmc_card_id(card));
64 : : ret = -EINVAL;
65 [ # # ]: 0 : } else if (func->irq_handler) {
66 : 0 : func->irq_handler(func);
67 : 0 : count++;
68 : : } else {
69 : 0 : pr_warning("%s: pending IRQ with no handler\n",
70 : : sdio_func_id(func));
71 : : ret = -EINVAL;
72 : : }
73 : : }
74 : : }
75 : :
76 [ # # ]: 0 : if (count)
77 : : return count;
78 : :
79 : : return ret;
80 : : }
81 : :
82 : 0 : static int sdio_irq_thread(void *_host)
83 : : {
84 : 0 : struct mmc_host *host = _host;
85 : 0 : struct sched_param param = { .sched_priority = 1 };
86 : : unsigned long period, idle_period;
87 : : int ret;
88 : :
89 : 0 : sched_setscheduler(current, SCHED_FIFO, ¶m);
90 : :
91 : : /*
92 : : * We want to allow for SDIO cards to work even on non SDIO
93 : : * aware hosts. One thing that non SDIO host cannot do is
94 : : * asynchronous notification of pending SDIO card interrupts
95 : : * hence we poll for them in that case.
96 : : */
97 : 0 : idle_period = msecs_to_jiffies(10);
98 : 0 : period = (host->caps & MMC_CAP_SDIO_IRQ) ?
99 [ # # ]: 0 : MAX_SCHEDULE_TIMEOUT : idle_period;
100 : :
101 : : pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
102 : : mmc_hostname(host), period);
103 : :
104 : : do {
105 : : /*
106 : : * We claim the host here on drivers behalf for a couple
107 : : * reasons:
108 : : *
109 : : * 1) it is already needed to retrieve the CCCR_INTx;
110 : : * 2) we want the driver(s) to clear the IRQ condition ASAP;
111 : : * 3) we need to control the abort condition locally.
112 : : *
113 : : * Just like traditional hard IRQ handlers, we expect SDIO
114 : : * IRQ handlers to be quick and to the point, so that the
115 : : * holding of the host lock does not cover too much work
116 : : * that doesn't require that lock to be held.
117 : : */
118 : 0 : ret = __mmc_claim_host(host, &host->sdio_irq_thread_abort);
119 [ # # ]: 0 : if (ret)
120 : : break;
121 : 0 : ret = process_sdio_pending_irqs(host);
122 : 0 : host->sdio_irq_pending = false;
123 : 0 : mmc_release_host(host);
124 : :
125 : : /*
126 : : * Give other threads a chance to run in the presence of
127 : : * errors.
128 : : */
129 [ # # ]: 0 : if (ret < 0) {
130 : 0 : set_current_state(TASK_INTERRUPTIBLE);
131 [ # # ]: 0 : if (!kthread_should_stop())
132 : 0 : schedule_timeout(HZ);
133 : 0 : set_current_state(TASK_RUNNING);
134 : : }
135 : :
136 : : /*
137 : : * Adaptive polling frequency based on the assumption
138 : : * that an interrupt will be closely followed by more.
139 : : * This has a substantial benefit for network devices.
140 : : */
141 [ # # ]: 0 : if (!(host->caps & MMC_CAP_SDIO_IRQ)) {
142 [ # # ]: 0 : if (ret > 0)
143 : 0 : period /= 2;
144 : : else {
145 : 0 : period++;
146 [ # # ]: 0 : if (period > idle_period)
147 : : period = idle_period;
148 : : }
149 : : }
150 : :
151 : 0 : set_current_state(TASK_INTERRUPTIBLE);
152 [ # # ]: 0 : if (host->caps & MMC_CAP_SDIO_IRQ) {
153 : : mmc_host_clk_hold(host);
154 : 0 : host->ops->enable_sdio_irq(host, 1);
155 : : mmc_host_clk_release(host);
156 : : }
157 [ # # ]: 0 : if (!kthread_should_stop())
158 : 0 : schedule_timeout(period);
159 : 0 : set_current_state(TASK_RUNNING);
160 [ # # ]: 0 : } while (!kthread_should_stop());
161 : :
162 [ # # ]: 0 : if (host->caps & MMC_CAP_SDIO_IRQ) {
163 : : mmc_host_clk_hold(host);
164 : 0 : host->ops->enable_sdio_irq(host, 0);
165 : : mmc_host_clk_release(host);
166 : : }
167 : :
168 : : pr_debug("%s: IRQ thread exiting with code %d\n",
169 : : mmc_hostname(host), ret);
170 : :
171 : 0 : return ret;
172 : : }
173 : :
174 : 0 : static int sdio_card_irq_get(struct mmc_card *card)
175 : : {
176 : 0 : struct mmc_host *host = card->host;
177 : :
178 [ # # ]: 0 : WARN_ON(!host->claimed);
179 : :
180 [ # # ]: 0 : if (!host->sdio_irqs++) {
181 : 0 : atomic_set(&host->sdio_irq_thread_abort, 0);
182 : 0 : host->sdio_irq_thread =
183 [ # # ]: 0 : kthread_run(sdio_irq_thread, host, "ksdioirqd/%s",
184 : : mmc_hostname(host));
185 [ # # ]: 0 : if (IS_ERR(host->sdio_irq_thread)) {
186 : : int err = PTR_ERR(host->sdio_irq_thread);
187 : 0 : host->sdio_irqs--;
188 : : return err;
189 : : }
190 : : }
191 : :
192 : : return 0;
193 : : }
194 : :
195 : 0 : static int sdio_card_irq_put(struct mmc_card *card)
196 : : {
197 : 0 : struct mmc_host *host = card->host;
198 : :
199 [ # # ]: 0 : WARN_ON(!host->claimed);
200 [ # # ]: 0 : BUG_ON(host->sdio_irqs < 1);
201 : :
202 [ # # ]: 0 : if (!--host->sdio_irqs) {
203 : 0 : atomic_set(&host->sdio_irq_thread_abort, 1);
204 : 0 : kthread_stop(host->sdio_irq_thread);
205 : : }
206 : :
207 : 0 : return 0;
208 : : }
209 : :
210 : : /* If there is only 1 function registered set sdio_single_irq */
211 : 0 : static void sdio_single_irq_set(struct mmc_card *card)
212 : : {
213 : : struct sdio_func *func;
214 : : int i;
215 : :
216 : 0 : card->sdio_single_irq = NULL;
217 [ # # ][ # # ]: 0 : if ((card->host->caps & MMC_CAP_SDIO_IRQ) &&
218 : 0 : card->host->sdio_irqs == 1)
219 [ # # ]: 0 : for (i = 0; i < card->sdio_funcs; i++) {
220 : 0 : func = card->sdio_func[i];
221 [ # # ][ # # ]: 0 : if (func && func->irq_handler) {
222 : 0 : card->sdio_single_irq = func;
223 : 0 : break;
224 : : }
225 : : }
226 : 0 : }
227 : :
228 : : /**
229 : : * sdio_claim_irq - claim the IRQ for a SDIO function
230 : : * @func: SDIO function
231 : : * @handler: IRQ handler callback
232 : : *
233 : : * Claim and activate the IRQ for the given SDIO function. The provided
234 : : * handler will be called when that IRQ is asserted. The host is always
235 : : * claimed already when the handler is called so the handler must not
236 : : * call sdio_claim_host() nor sdio_release_host().
237 : : */
238 : 0 : int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
239 : : {
240 : : int ret;
241 : : unsigned char reg;
242 : :
243 [ # # ]: 0 : BUG_ON(!func);
244 [ # # ]: 0 : BUG_ON(!func->card);
245 : :
246 : : pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
247 : :
248 [ # # ]: 0 : if (func->irq_handler) {
249 : : pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
250 : : return -EBUSY;
251 : : }
252 : :
253 : 0 : ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®);
254 [ # # ]: 0 : if (ret)
255 : : return ret;
256 : :
257 : 0 : reg |= 1 << func->num;
258 : :
259 : 0 : reg |= 1; /* Master interrupt enable */
260 : :
261 : 0 : ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
262 [ # # ]: 0 : if (ret)
263 : : return ret;
264 : :
265 : 0 : func->irq_handler = handler;
266 : 0 : ret = sdio_card_irq_get(func->card);
267 [ # # ]: 0 : if (ret)
268 : 0 : func->irq_handler = NULL;
269 : 0 : sdio_single_irq_set(func->card);
270 : :
271 : 0 : return ret;
272 : : }
273 : : EXPORT_SYMBOL_GPL(sdio_claim_irq);
274 : :
275 : : /**
276 : : * sdio_release_irq - release the IRQ for a SDIO function
277 : : * @func: SDIO function
278 : : *
279 : : * Disable and release the IRQ for the given SDIO function.
280 : : */
281 : 0 : int sdio_release_irq(struct sdio_func *func)
282 : : {
283 : : int ret;
284 : : unsigned char reg;
285 : :
286 [ # # ]: 0 : BUG_ON(!func);
287 [ # # ]: 0 : BUG_ON(!func->card);
288 : :
289 : : pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
290 : :
291 [ # # ]: 0 : if (func->irq_handler) {
292 : 0 : func->irq_handler = NULL;
293 : 0 : sdio_card_irq_put(func->card);
294 : 0 : sdio_single_irq_set(func->card);
295 : : }
296 : :
297 : 0 : ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®);
298 [ # # ]: 0 : if (ret)
299 : : return ret;
300 : :
301 : 0 : reg &= ~(1 << func->num);
302 : :
303 : : /* Disable master interrupt with the last function interrupt */
304 [ # # ]: 0 : if (!(reg & 0xFE))
305 : 0 : reg = 0;
306 : :
307 : 0 : ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
308 [ # # ]: 0 : if (ret)
309 : 0 : return ret;
310 : :
311 : : return 0;
312 : : }
313 : : EXPORT_SYMBOL_GPL(sdio_release_irq);
314 : :
|