Branch data Line data Source code
1 : : /*
2 : : * include/linux/phy.h
3 : : *
4 : : * Framework and drivers for configuring and reading different PHYs
5 : : * Based on code in sungem_phy.c and gianfar_phy.c
6 : : *
7 : : * Author: Andy Fleming
8 : : *
9 : : * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 : : *
11 : : * This program is free software; you can redistribute it and/or modify it
12 : : * under the terms of the GNU General Public License as published by the
13 : : * Free Software Foundation; either version 2 of the License, or (at your
14 : : * option) any later version.
15 : : *
16 : : */
17 : :
18 : : #ifndef __PHY_H
19 : : #define __PHY_H
20 : :
21 : : #include <linux/spinlock.h>
22 : : #include <linux/ethtool.h>
23 : : #include <linux/mii.h>
24 : : #include <linux/timer.h>
25 : : #include <linux/workqueue.h>
26 : : #include <linux/mod_devicetable.h>
27 : :
28 : : #include <linux/atomic.h>
29 : :
30 : : #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
31 : : SUPPORTED_10baseT_Full | \
32 : : SUPPORTED_100baseT_Half | \
33 : : SUPPORTED_100baseT_Full | \
34 : : SUPPORTED_Autoneg | \
35 : : SUPPORTED_TP | \
36 : : SUPPORTED_MII)
37 : :
38 : : #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
39 : : SUPPORTED_1000baseT_Half | \
40 : : SUPPORTED_1000baseT_Full)
41 : :
42 : : /*
43 : : * Set phydev->irq to PHY_POLL if interrupts are not supported,
44 : : * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
45 : : * the attached driver handles the interrupt
46 : : */
47 : : #define PHY_POLL -1
48 : : #define PHY_IGNORE_INTERRUPT -2
49 : :
50 : : #define PHY_HAS_INTERRUPT 0x00000001
51 : : #define PHY_HAS_MAGICANEG 0x00000002
52 : : #define PHY_IS_INTERNAL 0x00000004
53 : :
54 : : /* Interface Mode definitions */
55 : : typedef enum {
56 : : PHY_INTERFACE_MODE_NA,
57 : : PHY_INTERFACE_MODE_MII,
58 : : PHY_INTERFACE_MODE_GMII,
59 : : PHY_INTERFACE_MODE_SGMII,
60 : : PHY_INTERFACE_MODE_TBI,
61 : : PHY_INTERFACE_MODE_REVMII,
62 : : PHY_INTERFACE_MODE_RMII,
63 : : PHY_INTERFACE_MODE_RGMII,
64 : : PHY_INTERFACE_MODE_RGMII_ID,
65 : : PHY_INTERFACE_MODE_RGMII_RXID,
66 : : PHY_INTERFACE_MODE_RGMII_TXID,
67 : : PHY_INTERFACE_MODE_RTBI,
68 : : PHY_INTERFACE_MODE_SMII,
69 : : } phy_interface_t;
70 : :
71 : :
72 : : #define PHY_INIT_TIMEOUT 100000
73 : : #define PHY_STATE_TIME 1
74 : : #define PHY_FORCE_TIMEOUT 10
75 : : #define PHY_AN_TIMEOUT 10
76 : :
77 : : #define PHY_MAX_ADDR 32
78 : :
79 : : /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
80 : : #define PHY_ID_FMT "%s:%02x"
81 : :
82 : : /*
83 : : * Need to be a little smaller than phydev->dev.bus_id to leave room
84 : : * for the ":%02x"
85 : : */
86 : : #define MII_BUS_ID_SIZE (20 - 3)
87 : :
88 : : /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
89 : : IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
90 : : #define MII_ADDR_C45 (1<<30)
91 : :
92 : : struct device;
93 : : struct sk_buff;
94 : :
95 : : /*
96 : : * The Bus class for PHYs. Devices which provide access to
97 : : * PHYs should register using this structure
98 : : */
99 : : struct mii_bus {
100 : : const char *name;
101 : : char id[MII_BUS_ID_SIZE];
102 : : void *priv;
103 : : int (*read)(struct mii_bus *bus, int phy_id, int regnum);
104 : : int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
105 : : int (*reset)(struct mii_bus *bus);
106 : :
107 : : /*
108 : : * A lock to ensure that only one thing can read/write
109 : : * the MDIO bus at a time
110 : : */
111 : : struct mutex mdio_lock;
112 : :
113 : : struct device *parent;
114 : : enum {
115 : : MDIOBUS_ALLOCATED = 1,
116 : : MDIOBUS_REGISTERED,
117 : : MDIOBUS_UNREGISTERED,
118 : : MDIOBUS_RELEASED,
119 : : } state;
120 : : struct device dev;
121 : :
122 : : /* list of all PHYs on bus */
123 : : struct phy_device *phy_map[PHY_MAX_ADDR];
124 : :
125 : : /* PHY addresses to be ignored when probing */
126 : : u32 phy_mask;
127 : :
128 : : /*
129 : : * Pointer to an array of interrupts, each PHY's
130 : : * interrupt at the index matching its address
131 : : */
132 : : int *irq;
133 : : };
134 : : #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
135 : :
136 : : struct mii_bus *mdiobus_alloc_size(size_t);
137 : : static inline struct mii_bus *mdiobus_alloc(void)
138 : : {
139 : 0 : return mdiobus_alloc_size(0);
140 : : }
141 : :
142 : : int mdiobus_register(struct mii_bus *bus);
143 : : void mdiobus_unregister(struct mii_bus *bus);
144 : : void mdiobus_free(struct mii_bus *bus);
145 : : struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
146 : : int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
147 : : int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
148 : :
149 : :
150 : : #define PHY_INTERRUPT_DISABLED 0x0
151 : : #define PHY_INTERRUPT_ENABLED 0x80000000
152 : :
153 : : /* PHY state machine states:
154 : : *
155 : : * DOWN: PHY device and driver are not ready for anything. probe
156 : : * should be called if and only if the PHY is in this state,
157 : : * given that the PHY device exists.
158 : : * - PHY driver probe function will, depending on the PHY, set
159 : : * the state to STARTING or READY
160 : : *
161 : : * STARTING: PHY device is coming up, and the ethernet driver is
162 : : * not ready. PHY drivers may set this in the probe function.
163 : : * If they do, they are responsible for making sure the state is
164 : : * eventually set to indicate whether the PHY is UP or READY,
165 : : * depending on the state when the PHY is done starting up.
166 : : * - PHY driver will set the state to READY
167 : : * - start will set the state to PENDING
168 : : *
169 : : * READY: PHY is ready to send and receive packets, but the
170 : : * controller is not. By default, PHYs which do not implement
171 : : * probe will be set to this state by phy_probe(). If the PHY
172 : : * driver knows the PHY is ready, and the PHY state is STARTING,
173 : : * then it sets this STATE.
174 : : * - start will set the state to UP
175 : : *
176 : : * PENDING: PHY device is coming up, but the ethernet driver is
177 : : * ready. phy_start will set this state if the PHY state is
178 : : * STARTING.
179 : : * - PHY driver will set the state to UP when the PHY is ready
180 : : *
181 : : * UP: The PHY and attached device are ready to do work.
182 : : * Interrupts should be started here.
183 : : * - timer moves to AN
184 : : *
185 : : * AN: The PHY is currently negotiating the link state. Link is
186 : : * therefore down for now. phy_timer will set this state when it
187 : : * detects the state is UP. config_aneg will set this state
188 : : * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
189 : : * - If autonegotiation finishes, but there's no link, it sets
190 : : * the state to NOLINK.
191 : : * - If aneg finishes with link, it sets the state to RUNNING,
192 : : * and calls adjust_link
193 : : * - If autonegotiation did not finish after an arbitrary amount
194 : : * of time, autonegotiation should be tried again if the PHY
195 : : * supports "magic" autonegotiation (back to AN)
196 : : * - If it didn't finish, and no magic_aneg, move to FORCING.
197 : : *
198 : : * NOLINK: PHY is up, but not currently plugged in.
199 : : * - If the timer notes that the link comes back, we move to RUNNING
200 : : * - config_aneg moves to AN
201 : : * - phy_stop moves to HALTED
202 : : *
203 : : * FORCING: PHY is being configured with forced settings
204 : : * - if link is up, move to RUNNING
205 : : * - If link is down, we drop to the next highest setting, and
206 : : * retry (FORCING) after a timeout
207 : : * - phy_stop moves to HALTED
208 : : *
209 : : * RUNNING: PHY is currently up, running, and possibly sending
210 : : * and/or receiving packets
211 : : * - timer will set CHANGELINK if we're polling (this ensures the
212 : : * link state is polled every other cycle of this state machine,
213 : : * which makes it every other second)
214 : : * - irq will set CHANGELINK
215 : : * - config_aneg will set AN
216 : : * - phy_stop moves to HALTED
217 : : *
218 : : * CHANGELINK: PHY experienced a change in link state
219 : : * - timer moves to RUNNING if link
220 : : * - timer moves to NOLINK if the link is down
221 : : * - phy_stop moves to HALTED
222 : : *
223 : : * HALTED: PHY is up, but no polling or interrupts are done. Or
224 : : * PHY is in an error state.
225 : : *
226 : : * - phy_start moves to RESUMING
227 : : *
228 : : * RESUMING: PHY was halted, but now wants to run again.
229 : : * - If we are forcing, or aneg is done, timer moves to RUNNING
230 : : * - If aneg is not done, timer moves to AN
231 : : * - phy_stop moves to HALTED
232 : : */
233 : : enum phy_state {
234 : : PHY_DOWN=0,
235 : : PHY_STARTING,
236 : : PHY_READY,
237 : : PHY_PENDING,
238 : : PHY_UP,
239 : : PHY_AN,
240 : : PHY_RUNNING,
241 : : PHY_NOLINK,
242 : : PHY_FORCING,
243 : : PHY_CHANGELINK,
244 : : PHY_HALTED,
245 : : PHY_RESUMING
246 : : };
247 : :
248 : : /**
249 : : * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
250 : : * @devices_in_package: Bit vector of devices present.
251 : : * @device_ids: The device identifer for each present device.
252 : : */
253 : : struct phy_c45_device_ids {
254 : : u32 devices_in_package;
255 : : u32 device_ids[8];
256 : : };
257 : :
258 : : /* phy_device: An instance of a PHY
259 : : *
260 : : * drv: Pointer to the driver for this PHY instance
261 : : * bus: Pointer to the bus this PHY is on
262 : : * dev: driver model device structure for this PHY
263 : : * phy_id: UID for this device found during discovery
264 : : * c45_ids: 802.3-c45 Device Identifers if is_c45.
265 : : * is_c45: Set to true if this phy uses clause 45 addressing.
266 : : * is_internal: Set to true if this phy is internal to a MAC.
267 : : * state: state of the PHY for management purposes
268 : : * dev_flags: Device-specific flags used by the PHY driver.
269 : : * addr: Bus address of PHY
270 : : * link_timeout: The number of timer firings to wait before the
271 : : * giving up on the current attempt at acquiring a link
272 : : * irq: IRQ number of the PHY's interrupt (-1 if none)
273 : : * phy_timer: The timer for handling the state machine
274 : : * phy_queue: A work_queue for the interrupt
275 : : * attached_dev: The attached enet driver's device instance ptr
276 : : * adjust_link: Callback for the enet controller to respond to
277 : : * changes in the link state.
278 : : * adjust_state: Callback for the enet driver to respond to
279 : : * changes in the state machine.
280 : : *
281 : : * speed, duplex, pause, supported, advertising, and
282 : : * autoneg are used like in mii_if_info
283 : : *
284 : : * interrupts currently only supports enabled or disabled,
285 : : * but could be changed in the future to support enabling
286 : : * and disabling specific interrupts
287 : : *
288 : : * Contains some infrastructure for polling and interrupt
289 : : * handling, as well as handling shifts in PHY hardware state
290 : : */
291 : : struct phy_device {
292 : : /* Information about the PHY type */
293 : : /* And management functions */
294 : : struct phy_driver *drv;
295 : :
296 : : struct mii_bus *bus;
297 : :
298 : : struct device dev;
299 : :
300 : : u32 phy_id;
301 : :
302 : : struct phy_c45_device_ids c45_ids;
303 : : bool is_c45;
304 : : bool is_internal;
305 : :
306 : : enum phy_state state;
307 : :
308 : : u32 dev_flags;
309 : :
310 : : phy_interface_t interface;
311 : :
312 : : /* Bus address of the PHY (0-31) */
313 : : int addr;
314 : :
315 : : /*
316 : : * forced speed & duplex (no autoneg)
317 : : * partner speed & duplex & pause (autoneg)
318 : : */
319 : : int speed;
320 : : int duplex;
321 : : int pause;
322 : : int asym_pause;
323 : :
324 : : /* The most recently read link state */
325 : : int link;
326 : :
327 : : /* Enabled Interrupts */
328 : : u32 interrupts;
329 : :
330 : : /* Union of PHY and Attached devices' supported modes */
331 : : /* See mii.h for more info */
332 : : u32 supported;
333 : : u32 advertising;
334 : :
335 : : int autoneg;
336 : :
337 : : int link_timeout;
338 : :
339 : : /*
340 : : * Interrupt number for this PHY
341 : : * -1 means no interrupt
342 : : */
343 : : int irq;
344 : :
345 : : /* private data pointer */
346 : : /* For use by PHYs to maintain extra state */
347 : : void *priv;
348 : :
349 : : /* Interrupt and Polling infrastructure */
350 : : struct work_struct phy_queue;
351 : : struct delayed_work state_queue;
352 : : atomic_t irq_disable;
353 : :
354 : : struct mutex lock;
355 : :
356 : : struct net_device *attached_dev;
357 : :
358 : : void (*adjust_link)(struct net_device *dev);
359 : :
360 : : void (*adjust_state)(struct net_device *dev);
361 : : };
362 : : #define to_phy_device(d) container_of(d, struct phy_device, dev)
363 : :
364 : : /* struct phy_driver: Driver structure for a particular PHY type
365 : : *
366 : : * phy_id: The result of reading the UID registers of this PHY
367 : : * type, and ANDing them with the phy_id_mask. This driver
368 : : * only works for PHYs with IDs which match this field
369 : : * name: The friendly name of this PHY type
370 : : * phy_id_mask: Defines the important bits of the phy_id
371 : : * features: A list of features (speed, duplex, etc) supported
372 : : * by this PHY
373 : : * flags: A bitfield defining certain other features this PHY
374 : : * supports (like interrupts)
375 : : *
376 : : * The drivers must implement config_aneg and read_status. All
377 : : * other functions are optional. Note that none of these
378 : : * functions should be called from interrupt time. The goal is
379 : : * for the bus read/write functions to be able to block when the
380 : : * bus transaction is happening, and be freed up by an interrupt
381 : : * (The MPC85xx has this ability, though it is not currently
382 : : * supported in the driver).
383 : : */
384 : : struct phy_driver {
385 : : u32 phy_id;
386 : : char *name;
387 : : unsigned int phy_id_mask;
388 : : u32 features;
389 : : u32 flags;
390 : :
391 : : /*
392 : : * Called to initialize the PHY,
393 : : * including after a reset
394 : : */
395 : : int (*config_init)(struct phy_device *phydev);
396 : :
397 : : /*
398 : : * Called during discovery. Used to set
399 : : * up device-specific structures, if any
400 : : */
401 : : int (*probe)(struct phy_device *phydev);
402 : :
403 : : /* PHY Power Management */
404 : : int (*suspend)(struct phy_device *phydev);
405 : : int (*resume)(struct phy_device *phydev);
406 : :
407 : : /*
408 : : * Configures the advertisement and resets
409 : : * autonegotiation if phydev->autoneg is on,
410 : : * forces the speed to the current settings in phydev
411 : : * if phydev->autoneg is off
412 : : */
413 : : int (*config_aneg)(struct phy_device *phydev);
414 : :
415 : : /* Determines the negotiated speed and duplex */
416 : : int (*read_status)(struct phy_device *phydev);
417 : :
418 : : /* Clears any pending interrupts */
419 : : int (*ack_interrupt)(struct phy_device *phydev);
420 : :
421 : : /* Enables or disables interrupts */
422 : : int (*config_intr)(struct phy_device *phydev);
423 : :
424 : : /*
425 : : * Checks if the PHY generated an interrupt.
426 : : * For multi-PHY devices with shared PHY interrupt pin
427 : : */
428 : : int (*did_interrupt)(struct phy_device *phydev);
429 : :
430 : : /* Clears up any memory if needed */
431 : : void (*remove)(struct phy_device *phydev);
432 : :
433 : : /* Returns true if this is a suitable driver for the given
434 : : * phydev. If NULL, matching is based on phy_id and
435 : : * phy_id_mask.
436 : : */
437 : : int (*match_phy_device)(struct phy_device *phydev);
438 : :
439 : : /* Handles ethtool queries for hardware time stamping. */
440 : : int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti);
441 : :
442 : : /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
443 : : int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
444 : :
445 : : /*
446 : : * Requests a Rx timestamp for 'skb'. If the skb is accepted,
447 : : * the phy driver promises to deliver it using netif_rx() as
448 : : * soon as a timestamp becomes available. One of the
449 : : * PTP_CLASS_ values is passed in 'type'. The function must
450 : : * return true if the skb is accepted for delivery.
451 : : */
452 : : bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
453 : :
454 : : /*
455 : : * Requests a Tx timestamp for 'skb'. The phy driver promises
456 : : * to deliver it using skb_complete_tx_timestamp() as soon as a
457 : : * timestamp becomes available. One of the PTP_CLASS_ values
458 : : * is passed in 'type'.
459 : : */
460 : : void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
461 : :
462 : : /* Some devices (e.g. qnap TS-119P II) require PHY register changes to
463 : : * enable Wake on LAN, so set_wol is provided to be called in the
464 : : * ethernet driver's set_wol function. */
465 : : int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
466 : :
467 : : /* See set_wol, but for checking whether Wake on LAN is enabled. */
468 : : void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
469 : :
470 : : struct device_driver driver;
471 : : };
472 : : #define to_phy_driver(d) container_of(d, struct phy_driver, driver)
473 : :
474 : : #define PHY_ANY_ID "MATCH ANY PHY"
475 : : #define PHY_ANY_UID 0xffffffff
476 : :
477 : : /* A Structure for boards to register fixups with the PHY Lib */
478 : : struct phy_fixup {
479 : : struct list_head list;
480 : : char bus_id[20];
481 : : u32 phy_uid;
482 : : u32 phy_uid_mask;
483 : : int (*run)(struct phy_device *phydev);
484 : : };
485 : :
486 : : /**
487 : : * phy_read - Convenience function for reading a given PHY register
488 : : * @phydev: the phy_device struct
489 : : * @regnum: register number to read
490 : : *
491 : : * NOTE: MUST NOT be called from interrupt context,
492 : : * because the bus read/write functions may wait for an interrupt
493 : : * to conclude the operation.
494 : : */
495 : : static inline int phy_read(struct phy_device *phydev, u32 regnum)
496 : : {
497 : 174460 : return mdiobus_read(phydev->bus, phydev->addr, regnum);
498 : : }
499 : :
500 : : /**
501 : : * phy_write - Convenience function for writing a given PHY register
502 : : * @phydev: the phy_device struct
503 : : * @regnum: register number to write
504 : : * @val: value to write to @regnum
505 : : *
506 : : * NOTE: MUST NOT be called from interrupt context,
507 : : * because the bus read/write functions may wait for an interrupt
508 : : * to conclude the operation.
509 : : */
510 : : static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
511 : : {
512 : 0 : return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
513 : : }
514 : :
515 : : /**
516 : : * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
517 : : * @phydev: the phy_device struct
518 : : *
519 : : * NOTE: must be kept in sync with addition/removal of PHY_POLL and
520 : : * PHY_IGNORE_INTERRUPT
521 : : */
522 : : static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
523 : : {
524 : 87229 : return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
525 : : }
526 : :
527 : : /**
528 : : * phy_is_internal - Convenience function for testing if a PHY is internal
529 : : * @phydev: the phy_device struct
530 : : */
531 : : static inline bool phy_is_internal(struct phy_device *phydev)
532 : : {
533 : : return phydev->is_internal;
534 : : }
535 : :
536 : : struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
537 : : bool is_c45, struct phy_c45_device_ids *c45_ids);
538 : : struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
539 : : int phy_device_register(struct phy_device *phy);
540 : : int phy_init_hw(struct phy_device *phydev);
541 : : struct phy_device * phy_attach(struct net_device *dev,
542 : : const char *bus_id, phy_interface_t interface);
543 : : struct phy_device *phy_find_first(struct mii_bus *bus);
544 : : int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
545 : : void (*handler)(struct net_device *),
546 : : phy_interface_t interface);
547 : : struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
548 : : void (*handler)(struct net_device *),
549 : : phy_interface_t interface);
550 : : void phy_disconnect(struct phy_device *phydev);
551 : : void phy_detach(struct phy_device *phydev);
552 : : void phy_start(struct phy_device *phydev);
553 : : void phy_stop(struct phy_device *phydev);
554 : : int phy_start_aneg(struct phy_device *phydev);
555 : :
556 : : int phy_stop_interrupts(struct phy_device *phydev);
557 : :
558 : : static inline int phy_read_status(struct phy_device *phydev) {
559 : 43615 : return phydev->drv->read_status(phydev);
560 : : }
561 : :
562 : : int genphy_setup_forced(struct phy_device *phydev);
563 : : int genphy_restart_aneg(struct phy_device *phydev);
564 : : int genphy_config_aneg(struct phy_device *phydev);
565 : : int genphy_update_link(struct phy_device *phydev);
566 : : int genphy_read_status(struct phy_device *phydev);
567 : : int genphy_suspend(struct phy_device *phydev);
568 : : int genphy_resume(struct phy_device *phydev);
569 : : void phy_driver_unregister(struct phy_driver *drv);
570 : : void phy_drivers_unregister(struct phy_driver *drv, int n);
571 : : int phy_driver_register(struct phy_driver *new_driver);
572 : : int phy_drivers_register(struct phy_driver *new_driver, int n);
573 : : void phy_state_machine(struct work_struct *work);
574 : : void phy_change(struct work_struct *work);
575 : : void phy_mac_interrupt(struct phy_device *phydev, int new_link);
576 : : void phy_start_machine(struct phy_device *phydev,
577 : : void (*handler)(struct net_device *));
578 : : void phy_stop_machine(struct phy_device *phydev);
579 : : int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
580 : : int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
581 : : int phy_mii_ioctl(struct phy_device *phydev,
582 : : struct ifreq *ifr, int cmd);
583 : : int phy_start_interrupts(struct phy_device *phydev);
584 : : void phy_print_status(struct phy_device *phydev);
585 : : void phy_device_free(struct phy_device *phydev);
586 : :
587 : : int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
588 : : int (*run)(struct phy_device *));
589 : : int phy_register_fixup_for_id(const char *bus_id,
590 : : int (*run)(struct phy_device *));
591 : : int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
592 : : int (*run)(struct phy_device *));
593 : : int phy_scan_fixups(struct phy_device *phydev);
594 : :
595 : : int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
596 : : int phy_get_eee_err(struct phy_device *phydev);
597 : : int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
598 : : int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
599 : : int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
600 : : void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
601 : :
602 : : int __init mdio_bus_init(void);
603 : : void mdio_bus_exit(void);
604 : :
605 : : extern struct bus_type mdio_bus_type;
606 : : #endif /* __PHY_H */
|
